Akka(19): Stream:组合数据流,组合共用-Graph modular composition

来源:互联网 发布:h3c防火墙web配置 端口 编辑:程序博客网 时间:2024/03/28 22:36

   akka-stream的Graph是一种运算方案,它可能代表某种简单的线性数据流图如:Source/Flow/Sink,也可能是由更基础的流图组合而成相对复杂点的某种复合流图,而这个复合流图本身又可以被当作组件来组合更大的Graph。因为Graph只是对数据流运算的描述,所以它是可以被重复利用的。所以我们应该尽量地按照业务流程需要来设计构建Graph。在更高的功能层面上实现Graph的模块化(modular)。按上回讨论,Graph又可以被描述成一种黑盒子,它的入口和出口就是Shape,而内部的作用即处理步骤Stage则是用GraphStage来形容的。下面是akka-stream预设的一些基础数据流图:

compose_shapes.png

上面Source,Sink,Flow代表具备线性步骤linear-stage的流图,属于最基础的组件,可以用来构建数据处理链条。而Fan-In合并型,Fan-Out扩散型则具备多个输入或输出端口,可以用来构建更复杂的数据流图。我们可以用以上这些基础Graph来构建更复杂的复合流图,而这些复合流图又可以被重复利用去构建更复杂的复合流图。下面就是一些常见的复合流图:

compose_composites.png

注意上面的Composite Flow(from Sink and Source)可以用Flow.fromSinkAndSource函数构建:

def fromSinkAndSource[I, O](sink: Graph[SinkShape[I], _], source: Graph[SourceShape[O], _]): Flow[I, O, NotUsed] =    fromSinkAndSourceMat(sink, source)(Keep.none)

这个Flow从流向来说先Sink再Source是反的,形成的Flow上下游间无法协调,即Source端终结信号无法到达Sink端,因为这两端是相互独立的。我们必须用CoupledTermination对象中的fromSinkAndSource函数构建的Flow来解决这个问题:

/** * Allows coupling termination (cancellation, completion, erroring) of Sinks and Sources while creating a Flow them them. * Similar to `Flow.fromSinkAndSource` however that API does not connect the completion signals of the wrapped stages. */object CoupledTerminationFlow {  @deprecated("Use `Flow.fromSinkAndSourceCoupledMat(..., ...)(Keep.both)` instead", "2.5.2")  def fromSinkAndSource[I, O, M1, M2](in: Sink[I, M1], out: Source[O, M2]): Flow[I, O, (M1, M2)] =    Flow.fromSinkAndSourceCoupledMat(in, out)(Keep.both) 

从上面图列里的Composite BidiFlow可以看出:一个复合Graph的内部可以是很复杂的,但从外面看到的只是简单的几个输入输出端口。不过Graph内部构件之间的端口必须按照功能逻辑进行正确的连接,剩下的就变成直接向外公开的界面端口了。这种机制支持了层级式的模块化组合方式,如下面的图示:

compose_nested_flow.png

最后变成:

compose_nested_flow_opaque.png

在DSL里我们可以用name("???")来分割模块:

val nestedFlow =  Flow[Int].filter(_ != 0) // an atomic processing stage    .map(_ - 2) // another atomic processing stage    .named("nestedFlow") // wraps up the Flow, and gives it a nameval nestedSink =  nestedFlow.to(Sink.fold(0)(_ + _)) // wire an atomic sink to the nestedFlow    .named("nestedSink") // wrap it up// Create a RunnableGraphval runnableGraph = nestedSource.to(nestedSink)

在下面这个示范里我们自定义一个某种功能的流图模块:它有2个输入和3个输出。然后我们再使用这个自定义流图模块组建一个完整的闭合流图:

import akka.actor._import akka.stream._import akka.stream.scaladsl._import scala.collection.immutableobject GraphModules {  def someProcess[I, O]: I => O = i => i.asInstanceOf[O]  case class TwoThreeShape[I, I2, O, O2, O3](                                              in1: Inlet[I],                                              in2: Inlet[I2],                                              out1: Outlet[O],                                              out2: Outlet[O2],                                              out3: Outlet[O3]) extends Shape {    override def inlets: immutable.Seq[Inlet[_]] = in1 :: in2 :: Nil    override def outlets: immutable.Seq[Outlet[_]] = out1 :: out2 :: out3 :: Nil    override def deepCopy(): Shape = TwoThreeShape(      in1.carbonCopy(),      in2.carbonCopy(),      out1.carbonCopy(),      out2.carbonCopy(),      out3.carbonCopy()    )  }//a functional module with 2 input 3 output  def TwoThreeGraph[I, I2, O, O2, O3] = GraphDSL.create() { implicit builder =>    val balancer = builder.add(Balance[I](2))    val flow = builder.add(Flow[I2].map(someProcess[I2, O2]))    TwoThreeShape(balancer.in, flow.in, balancer.out(0), balancer.out(1), flow.out)  }  val closedGraph = GraphDSL.create() {implicit builder =>    import GraphDSL.Implicits._    val inp1 = builder.add(Source(List(1,2,3))).out    val inp2 = builder.add(Source(List(10,20,30))).out    val merge = builder.add(Merge[Int](2))    val mod23 = builder.add(TwoThreeGraph[Int,Int,Int,Int,Int])     inp1 ~> mod23.in1     inp2 ~> mod23.in2     mod23.out1 ~> merge.in(0)     mod23.out2 ~> merge.in(1)     mod23.out3 ~> Sink.foreach(println)     merge ~> Sink.foreach(println)     ClosedShape  }}object TailorGraph extends App {  import GraphModules._  implicit val sys = ActorSystem("streamSys")  implicit val ec = sys.dispatcher  implicit val mat = ActorMaterializer()  RunnableGraph.fromGraph(closedGraph).run()  scala.io.StdIn.readLine()  sys.terminate()}

这个自定义的TwoThreeGraph是一个复合的流图模块,是可以重复使用的。注意这个~>符合的使用:akka-stream只提供了对预设定Shape作为连接对象的支持如:

      def ~>[Out](junction: UniformFanInShape[T, Out])(implicit b: Builder[_]): PortOps[Out] = {...}      def ~>[Out](junction: UniformFanOutShape[T, Out])(implicit b: Builder[_]): PortOps[Out] = {...}      def ~>[Out](flow: FlowShape[T, Out])(implicit b: Builder[_]): PortOps[Out] = {...}      def ~>(to: Graph[SinkShape[T], _])(implicit b: Builder[_]): Unit =        b.addEdge(importAndGetPort(b), b.add(to).in)      def ~>(to: SinkShape[T])(implicit b: Builder[_]): Unit =        b.addEdge(importAndGetPort(b), to.in)...

所以对于我们自定义的TwoThreeShape就只能使用直接的端口连接了:

   def ~>[U >: T](to: Inlet[U])(implicit b: Builder[_]): Unit =        b.addEdge(importAndGetPort(b), to)

以上的过程显示:通过akka的GraphDSL,对复合型Graph的构建可以实现形象化,大部分工作都在如何对组件之间的端口进行连接。我们再来看个较复杂复合流图的构建过程,下面是这个流图的图示:

compose_graph.png

可以说这是一个相对复杂的数据处理方案,里面甚至包括了数据流回路(feedback)。无法想象如果用纯函数数据流如scalaz-stream应该怎样去实现这么复杂的流程,也可能根本是没有解决方案的。但用akka GraphDSL可以很形象的组合这个数据流图;

  import GraphDSL.Implicits._  RunnableGraph.fromGraph(GraphDSL.create() { implicit builder =>    val A: Outlet[Int]                  = builder.add(Source.single(0)).out    val B: UniformFanOutShape[Int, Int] = builder.add(Broadcast[Int](2))    val C: UniformFanInShape[Int, Int]  = builder.add(Merge[Int](2))    val D: FlowShape[Int, Int]          = builder.add(Flow[Int].map(_ + 1))    val E: UniformFanOutShape[Int, Int] = builder.add(Balance[Int](2))    val F: UniformFanInShape[Int, Int]  = builder.add(Merge[Int](2))    val G: Inlet[Any]                   = builder.add(Sink.foreach(println)).in    C     <~      F    A  ~>  B  ~>  C     ~>      F    B  ~>  D  ~>  E  ~>  F    E  ~>  G    ClosedShape  })

另一个端口连接方式的版本如下:

RunnableGraph.fromGraph(GraphDSL.create() { implicit builder =>  val B = builder.add(Broadcast[Int](2))  val C = builder.add(Merge[Int](2))  val E = builder.add(Balance[Int](2))  val F = builder.add(Merge[Int](2))  Source.single(0) ~> B.in; B.out(0) ~> C.in(1); C.out ~> F.in(0)  C.in(0) <~ F.out  B.out(1).map(_ + 1) ~> E.in; E.out(0) ~> F.in(1)  E.out(1) ~> Sink.foreach(println)  ClosedShape})

如果把上面这个复杂的Graph切分成模块的话,其中一部分是这样的:

compose_graph_partial.png

这个开放数据流复合图可以用GraphDSL这样构建:
val partial = GraphDSL.create() { implicit builder =>    val B = builder.add(Broadcast[Int](2))    val C = builder.add(Merge[Int](2))    val E = builder.add(Balance[Int](2))    val F = builder.add(Merge[Int](2))    C  <~  F    B  ~>                            C  ~>  F    B  ~>  Flow[Int].map(_ + 1)  ~>  E  ~>  F    FlowShape(B.in, E.out(1))  }.named("partial")
模块化的完整Graph图示如下:
compose_graph_flow.png
这部分可以用下面的代码来实现:
// Convert the partial graph of FlowShape to a Flow to get// access to the fluid DSL (for example to be able to call .filter())val flow = Flow.fromGraph(partial)// Simple way to create a graph backed Sourceval source = Source.fromGraph( GraphDSL.create() { implicit builder =>  val merge = builder.add(Merge[Int](2))  Source.single(0)      ~> merge  Source(List(2, 3, 4)) ~> merge  // Exposing exactly one output port  SourceShape(merge.out)})// Building a Sink with a nested Flow, using the fluid DSLval sink = {  val nestedFlow = Flow[Int].map(_ * 2).drop(10).named("nestedFlow")  nestedFlow.to(Sink.head)}// Putting all togetherval closed = source.via(flow.filter(_ > 1)).to(sink)
和scalaz-stream不同的还有akka-stream的运算是在actor上进行的,除了大家都能对数据流元素进行处理之外,akka-stream还可以通过actor的内部状态来维护和返回运算结果。这个运算结果在复合流图中传播的过程是可控的,如下图示:
compose_mat.png

返回运算结果是通过viaMat, toMat来实现的。简写的via,to默认选择流图左边运算产生的结果。

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

阅读全文
0 0
原创粉丝点击