XGBoost-Python完全调参指南-参数解释篇

来源:互联网 发布:淘宝店如何上架宝贝 编辑:程序博客网 时间:2024/03/19 16:52

在analytics vidhya上看到一篇<Complete Guide to Parameter Tuning in XGBoost in Python>,写的很好。因此打算翻译一下这篇文章,也让自己有更深的印象。具体内容主要翻译文章的关键意思。

原文见:

http://www.analyticsvidhya.com/blog/2016/03/complete-guide-parameter-tuning-xgboost-with-codes-python/

这篇文章按照原文的分节,共分为三个部分,其中本章介绍第一部分。

 1、简介与XGboost

2、参数理解

3、参数调优



关于XGBoost的参数,发现已经有比较完善的翻译了。故本文转载其内容,并作了一些修改与拓展。

原文链接见:http://blog.csdn.net/zc02051126/article/details/46711047

XGBoost参数

XGBoost的参数可以分为三种类型:通用参数、booster参数以及学习目标参数

  • General parameters:参数控制在提升(boosting)过程中使用哪种booster,常用的booster有树模型(tree)和线性模型(linear model)。
  • Booster parameters:这取决于使用哪种booster。
  • Learning Task parameters:控制学习的场景,例如在回归问题中会使用不同的参数控制排序。
  • 除了以上参数还可能有其它参数,在命令行中使用

General Parameters

  • booster [default=gbtree] 
    • 有两种模型可以选择gbtree和gblinear。gbtree使用基于树的模型进行提升计算,gblinear使用线性模型进行提升计算。缺省值为gbtree
  • silent [default=0] 
    • 取0时表示打印出运行时信息,取1时表示以缄默方式运行,不打印运行时的信息。缺省值为0
    • 建议取0,过程中的输出数据有助于理解模型以及调参。另外实际上我设置其为1也通常无法缄默运行。。
  • nthread [default to maximum number of threads available if not set] 
    • XGBoost运行时的线程数。缺省值是当前系统可以获得的最大线程数
    • 如果你希望以最大速度运行,建议不设置这个参数,模型将自动获得最大线程
  • num_pbuffer [set automatically by xgboost, no need to be set by user] 
    • size of prediction buffer, normally set to number of training instances. The buffers are used to save the prediction results of last boosting step.
  • num_feature [set automatically by xgboost, no need to be set by user] 
    • boosting过程中用到的特征维数,设置为特征个数。XGBoost会自动设置,不需要手工设置

Booster Parameters

From xgboost-unity, the bst: prefix is no longer needed for booster parameters. Parameter with or without bst: prefix will be equivalent(i.e. both bst:eta and eta will be valid parameter setting) .

Parameter for Tree Booster

  • eta [default=0.3] 
    • 为了防止过拟合,更新过程中用到的收缩步长。在每次提升计算之后,算法会直接获得新特征的权重。 eta通过缩减特征的权重使提升计算过程更加保守。缺省值为0.3
    • 取值范围为:[0,1]
    • 通常最后设置eta为0.01~0.2
  • gamma [default=0] 
    • minimum loss reduction required to make a further partition on a leaf node of the tree. the larger, the more conservative the algorithm will be.
    • range: [0,∞]
    • 模型在默认情况下,对于一个节点的划分只有在其loss function 得到结果大于0的情况下才进行,而gamma 给定了所需的最低loss function的值
    • gamma值使得算法更conservation,且其值依赖于loss function ,在模型中应该进行调参。
  • max_depth [default=6] 
    • 树的最大深度。缺省值为6
    • 取值范围为:[1,∞]
    • 指树的最大深度
    • 树的深度越大,则对数据的拟合程度越高(过拟合程度也越高)。即该参数也是控制过拟合
    • 建议通过交叉验证(xgb.cv ) 进行调参
    • 通常取值:3-10
  • min_child_weight [default=1] 
    • 孩子节点中最小的样本权重和。如果一个叶子节点的样本权重和小于min_child_weight则拆分过程结束。在现行回归模型中,这个参数是指建立每个模型所需要的最小样本数。该成熟越大算法越conservative。即调大这个参数能够控制过拟合。
    • 取值范围为: [0,∞]
  • max_delta_step [default=0] 
    • Maximum delta step we allow each tree’s weight estimation to be. If the value is set to 0, it means there is no constraint. If it is set to a positive value, it can help making the update step more conservative. Usually this parameter is not needed, but it might help in logistic regression when class is extremely imbalanced. Set it to value of 1-10 might help control the update
    • 取值范围为:[0,∞]
    • 如果取值为0,那么意味着无限制。如果取为正数,则其使得xgboost更新过程更加保守。
    • 通常不需要设置这个值,但在使用logistics 回归时,若类别极度不平衡,则调整该参数可能有效果
  • subsample [default=1] 
    • 用于训练模型的子样本占整个样本集合的比例。如果设置为0.5则意味着XGBoost将随机的从整个样本集合中抽取出50%的子样本建立树模型,这能够防止过拟合。
    • 取值范围为:(0,1]
  • colsample_bytree [default=1] 
    • 在建立树时对特征随机采样的比例。缺省值为1
    • 取值范围:(0,1]
  • colsample_bylevel[default=1]
    • 决定每次节点划分时子样例的比例
    • 通常不使用,因为subsample和colsample_bytree已经可以起到相同的作用了
  • scale_pos_weight[default=0]
    • A value greater than 0 can be used in case of high class imbalance as it helps in faster convergence.
    • 大于0的取值可以处理类别不平衡的情况。帮助模型更快收敛

Parameter for Linear Booster

  • lambda [default=0] 
    • L2 正则的惩罚系数
    • 用于处理XGBoost的正则化部分。通常不使用,但可以用来降低过拟合
  • alpha [default=0] 
    • L1 正则的惩罚系数
    • 当数据维度极高时可以使用,使得算法运行更快。
  • lambda_bias 
    • 在偏置上的L2正则。缺省值为0(在L1上没有偏置项的正则,因为L1时偏置不重要)

Task Parameters

  • objective [ default=reg:linear ] 
    • 定义学习任务及相应的学习目标,可选的目标函数如下:
    • “reg:linear” –线性回归。
    • “reg:logistic” –逻辑回归。
    • “binary:logistic” –二分类的逻辑回归问题,输出为概率。
    • “binary:logitraw” –二分类的逻辑回归问题,输出的结果为wTx。
    • “count:poisson” –计数问题的poisson回归,输出结果为poisson分布。
    • 在poisson回归中,max_delta_step的缺省值为0.7。(used to safeguard optimization)
    • “multi:softmax” –让XGBoost采用softmax目标函数处理多分类问题,同时需要设置参数num_class(类别个数)
    • “multi:softprob” –和softmax一样,但是输出的是ndata * nclass的向量,可以将该向量reshape成ndata行nclass列的矩阵。每行数据表示样本所属于每个类别的概率。
    • “rank:pairwise” –set XGBoost to do ranking task by minimizing the pairwise loss
  • base_score [ default=0.5 ] 
    • the initial prediction score of all instances, global bias
  • eval_metric [ default according to objective ] 
    • 校验数据所需要的评价指标,不同的目标函数将会有缺省的评价指标(rmse for regression, and error for classification, mean average precision for ranking)
    • 用户可以添加多种评价指标,对于Python用户要以list传递参数对给程序,而不是map参数list参数不会覆盖’eval_metric’
    • The choices are listed below:
    • “rmse”: root mean square error
    • “logloss”: negative log-likelihood
    • “error”: Binary classification error rate. It is calculated as #(wrong cases)/#(all cases). For the predictions, the evaluation will regard the instances with prediction value larger than 0.5 as positive instances, and the others as negative instances.
    • “merror”: Multiclass classification error rate. It is calculated as #(wrong cases)/#(all cases).
    • “mlogloss”: Multiclass logloss
    • “auc”: Area under the curve for ranking evaluation.
    • “ndcg”:Normalized Discounted Cumulative Gain
    • “map”:Mean average precision
    • “ndcg@n”,”map@n”: n can be assigned as an integer to cut off the top positions in the lists for evaluation.
    • “ndcg-“,”map-“,”ndcg@n-“,”map@n-“: In XGBoost, NDCG and MAP will evaluate the score of a list without any positive samples as 1. By adding “-” in the evaluation metric XGBoost will evaluate these score as 0 to be consistent under some conditions. 
      training repeatively
  • seed [ default=0 ] 
    • 随机数的种子。缺省值为0
    • 可以用于产生可重复的结果(每次取一样的seed即可得到相同的随机划分)

Console Parameters

The following parameters are only used in the console version of xgboost 
* use_buffer [ default=1 ] 
- 是否为输入创建二进制的缓存文件,缓存文件可以加速计算。缺省值为1 
* num_round 
- boosting迭代计算次数。 
* data 
- 输入数据的路径 
* test:data 
- 测试数据的路径 
* save_period [default=0] 
- 表示保存第i*save_period次迭代的模型。例如save_period=10表示每隔10迭代计算XGBoost将会保存中间结果,设置为0表示每次计算的模型都要保持。 
* task [default=train] options: train, pred, eval, dump 
- train:训练模型
- pred:对测试数据进行预测 
- eval:通过eval[name]=filenam定义评价指标 
- dump:将学习模型保存成文本格式 
* model_in [default=NULL] 
- 指向模型的路径在test, eval, dump都会用到,如果在training中定义XGBoost将会接着输入模型继续训练 
* model_out [default=NULL] 
- 训练完成后模型的保存路径,如果没有定义则会输出类似0003.model这样的结果,0003是第三次训练的模型结果。 
* model_dir [default=models] 
- 输出模型所保存的路径。 
* fmap 
- feature map, used for dump model 
* name_dump [default=dump.txt] 
- name of model dump file 
* name_pred [default=pred.txt] 
- 预测结果文件 
* pred_margin [default=0] 
- 输出预测的边界,而不是转换后的概率


如果你比较习惯scikit-learn的参数形式,那么XGBoost的Python 版本也提供了sklearn形式的接口 XGBClassifier。它使用sklearn形式的参数命名方式,对应关系如下:

  1. eta –> learning_rate
  2. lambda –> reg_lambda
  3. alpha –> reg_alpha


当然,想获取更多更详细的休息,请参考XGBoost的官方文档,也会有更多更新的内容。

  1. XGBoost Parameters (official guide)
  2. XGBoost Demo Codes (xgboost GitHub repository)
  3. Python API Reference (official guide)

阅读全文
0 0
原创粉丝点击
热门问题 老师的惩罚 人脸识别 我在镇武司摸鱼那些年 重生之率土为王 我在大康的咸鱼生活 盘龙之生命进化 天生仙种 凡人之先天五行 春回大明朝 姑娘不必设防,我是瞎子 steam中国版原来的游戏怎么办 老公买驾照被骗妻子应该怎么办 被淘密码骗了怎么办 逛街手机没电了怎么办 电脑登入密码忘了怎么办 晚上睡不好觉经常做梦怎么办 开淘宝店开始零销量怎么办 淘宝店开直通车后销量怎么办 淘宝直播一开始直播没人该怎么办 淘宝店铺访客数据下滑怎么办 2个ctrl键都失灵怎么办 淘宝上搜索不到很久以前订单怎么办 关键词找不到了是不是被降权怎么办 购买小程序关键词想退款怎么办? 浏览器审查元素不拆分关键词怎么办 拼多多商品想重新编辑怎么办 新开店铺没有销量怎么办 新开的店铺没有销量怎么办 淘宝的商品权重下降是怎么办 360n5手机耗电快怎么办 怪兽充电宝丢了怎么办 有已处置的评价怎么办 淘宝降权了怎么办2018 使用虚假广告词被工商查到怎么办 为什么手机淘宝店关注不了怎么办 淘宝买东西付钱后卖家不发货怎么办 微信销售群没人买东西怎么办 淘宝想开2个店铺怎么办 拼多多没钱交保证金怎么办 差评一个月后怎么办 淘宝买家投诉成立后怎么办 天猫投诉成立了怎么办 新开实体店铺没生意怎么办 新开淘宝没流量怎么办 白色板鞋有青草弄的绿色怎么办 淘宝租衣服不退押金怎么办 c盘不可以扩展怎么办 实践教学管理平台忘记账号怎么办 淘宝申请售后店家不处理怎么办 全民k歌地区限制怎么办 网络电视hdp无法下载怎么办