JacORB安装及配置指南

来源：互联网发布：男人知天命之年说说编辑：程序博客网时间：2024/04/20 09:27

安装前需要注意，JAVA_HOME配置的路径不能含有空格（例如/Program Files/），另外Ant可以正常使用

1．从svn上下载JacORB-2.3.0-bin.zip（不包含源码）或者JacORB-2.3.0-src.zip（包含源码）

2．解压的任意目录下，如E:/JacORB

3．在E:/JacORB下新建一个目录classes

4．添加如下的系统环境变量

1） JACORB_HOME=E:/JacORB

2） Path环境变量添加%JACORB_HOME%/bin

3） Classpath环境变量添加%JACORB_HOME%/lib/idl.jar;%JACORB_HOME%/lib/jacorb.jar;%JACORB_HOME%/lib/logkit-1.2.jar;%JACORB_HOME%/lib/avalon-framework-4.1.5.jar;%JACORB_HOME%/classes;

5． % JACORB_HOME%下的etc目录有一个文件jacorb_properties.template，将此文件copy到步骤3所新建的classes目录下，并修改文件为jacorb.properties

6．编辑jacorb.properties文件，将其中的ORBInitRef.NameService对应的键值更改为file:/c:/NS_Ref，如下：

ORBInitRef.NameService=file:/c:/NS_Ref

7． % JACORB_HOME%下的etc目录有一个文件orb.properties，修改其中的jacorb.config.dir对应的键值为e:/JacORB，如下：

jacorb.config.dir=e:/JacORB

8．% JACORB_HOME%下的etc目录有一个文件commom.xml,定位到如下位置：

<!--

<exclude name="idl.jar" />

-->

</fileset>

</path>

修改为粗体部分

9．定位到% JACORB_HOME%下的bin目录，发现存在下列4个文件：

a) idl.bat.tpl

b) idl.tpl

c) jaco.bat.tpl

d) jaco.tpl

分别将上述4个文件的tpl后缀去掉（tpl表示template模板，不知为何从官方网站下载的文件会出现这样的问题，不修改直接导致jacorb无法工作）

10．修改jaco.bat：

原先内容：

@JAVA_CMD@ -Djava.endorsed.dirs=@JACORB_HOME@/lib -Djacorb.home=@JACORB_HOME@ -Dorg.omg.CORBA.ORBClass=org.jacorb.orb.ORB -Dorg.omg.CORBA.ORBSingletonClass=org.jacorb.orb.ORBSingleton -classpath %CLASSPATH% %*

修改后为：

JAVA -Djava.endorsed.dirs=%JACORB_HOME%/lib -Djacorb.home=%JACORB_HOME% -Dorg.omg.CORBA.ORBClass=org.jacorb.orb.ORB -Dorg.omg.CORBA.ORBSingletonClass=org.jacorb.orb.ORBSingleton -classpath %CLASSPATH% %*

11．修改idl.bat：

原先内容：

@JAVA_CMD@ -classpath "@JACORB_HOME@/lib/idl.jar;@JACORB_HOME@/lib/logkit-1.2.jar;%CLASSPATH%" org.jacorb.idl.parser %*

修改后为：

JAVA -classpath "%JACORB_HOME%/lib/idl.jar;%JACORB_HOME%/lib/logkit-1.2.jar;%CLASSPATH%" org.jacorb.idl.parser %*

完成上述步骤无误后，可以测试一下jacorb是否正确安装，测试步骤如下：

1．命令行窗口定位到% JACORB_HOME%下的demo/grid/目录，输入ant后直接回车开始ant编译，出现BUILD SUCCESSED表示编译成功

2．这样会进行idl编译server.idl文件，在% JACORB_HOME%/demo/grid/generated下生成corba所需的源文件 ,同时，ant会编译所有的java源文件，% JACORB_HOME%/classes下面生成 .class文件

3．打开一个命令行窗口，输入ns或ns.bat，出现如下信息：

C:/Documents and Settings/muning>ns.bat

[jacorb.orb.print_ver] INFO :

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

JacORB V 2.3.0, www.jacorb.org

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[jacorb.orb] INFO : Property "jacorb.hashtable_class" is set to: java.util.Hasht

able

[org.jacorb.orb.codes] WARN : Warning - unknown codeset (GBK) - defaulting to IS

O-8859-1

[jacorb.orb.intercept] INFO : InterceptorManager started with 0 Server Intercept

ors, 0 Client Interceptors and 1 IOR Interceptors

[jacorb.orb.singleton] INFO : created ORBSingleton

[jacorb.naming] INFO : NS up

[jacorb.orb] INFO : ORB run

表示JacORB正常启动

4．打开一个新的命令行窗口，输入jaco demo.grid.Server，出现如下信息：

[jacorb.orb.print_ver] INFO :

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

JacORB V 2.3.0, www.jacorb.org

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[jacorb.orb] INFO : Property "jacorb.hashtable_class" is set to: java.util.Hasht

able

[org.jacorb.orb.codes] WARN : Warning - unknown codeset (GBK) - defaulting to IS

O-8859-1

[jacorb.orb.intercept] INFO : InterceptorManager started with 0 Server Intercept

ors, 0 Client Interceptors and 1 IOR Interceptors

[jacorb.poa] INFO : oid:

00 15 23 22 0E 02 3C 18 01 2C 37 ..#"..<..,7

object is activated

[jacorb.poa] INFO : Using server ID (7483177760) for transient POA

[jacorb.orb.singleton] INFO : created ORBSingleton

[jacorb.orb.giop] INFO : ClientConnectionManager: created new ClientGIOPConnecti

on to 192.168.100.47:1407 (9f671b)

[jacorb.orb.iiop] INFO : Connected to 192.168.100.47:1407 from local port 1409

[jacorb.orb] INFO : ORB run

同时在步骤3打开的窗口中出现：

[jacorb.naming] INFO : re-Bound name: grid.example

表示测试范例的ORB服务端正常启动

5．打开一个新的命令行窗口，输入，出现如下信息：

[jacorb.orb.print_ver] INFO :

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

JacORB V 2.3.0, www.jacorb.org

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[jacorb.orb] INFO : Property "jacorb.hashtable_class" is set to: java.util.Hasht

able

[org.jacorb.orb.codes] WARN : Warning - unknown codeset (GBK) - defaulting to IS

O-8859-1

[jacorb.orb.intercept] INFO : InterceptorManager started with 0 Server Intercept

ors, 0 Client Interceptors and 1 IOR Interceptors

[jacorb.orb.singleton] INFO : created ORBSingleton

[jacorb.orb.giop] INFO : ClientConnectionManager: created new ClientGIOPConnecti

on to 192.168.100.47:1407 (1db699b)

[jacorb.orb.iiop] INFO : Connected to 192.168.100.47:1407 from local port 1419

[jacorb.orb.giop] INFO : ClientConnectionManager: created new ClientGIOPConnecti

on to 192.168.100.47:1408 (cbf30e)

[jacorb.orb.iiop] INFO : Connected to 192.168.100.47:1408 from local port 1420

Height = 31

Width = 14

Old value at (30,13): 0.21

Setting (30,13) to 470.11

New value at (30,13): 470.11

MyException, reason: This is only a test exception, no harm done :-)

[jacorb.orb] INFO : prepare ORB for shutdown...

[jacorb.orb] INFO : ORB going down...

[jacorb.orb.iiop] INFO : Client-side TCP transport to 192.168.100.47:1408 closed

[jacorb.orb.iiop] INFO : Client-side TCP transport to 192.168.100.47:1407 closed

[jacorb.orb] INFO : ORB shutdown complete

看到这些表示你已经成功的运行了一个极其简单的例子