Python程序员常犯的十个错误
来源:互联网 发布:怎么建淘宝优惠群 编辑:程序博客网 时间:2024/04/23 14:08
Top 10 Mistakes that Python Programmers Make
原文地址:http://www.toptal.com/python/top-10-mistakes-that-python-programmers-make
About Python
Python is an interpreted, object-oriented, high-level programming language with dynamicsemantics(语义学). Its high-level built in data structures, combined with dynamic typing and dynamic binding, make it very attractive forRapid Application Development, as well as for use as a scripting or glue language to connect existing components or services. Python supports modules and packages, thereby encouraging programmodularity(模块性) and code reuse.
About this article
Python’s simple, easy-to-learn syntax can mislead Python developers – especially those who are newer to the language – into missing some of itssubtleties(微妙) andunderestimating(低估) the power of the language.
With that in mind, this article presents a “top 10” list of somewhat subtle, harder-to-catch mistakes that can bite even the most advanced Python developer in the rear.
(Note: This article is intended for a more advanced audience than Common Mistakes of Python Programmers, which is geared more toward those who are newer to the language.)
Common Mistake #1: Misusing expressions as defaults for function arguments
Python allows you to specify that a function argument is optional by providing adefault value for it. While this is a great feature of the language, it can lead to some confusion when the default value ismutable. For example, consider this Python function definition:
>>> def foo(bar=[]): # bar is optional and defaults to [] if not specified... bar.append("baz") # but this line could be problematic, as we'll see...... return bar
A common mistake is to think that the optional argument will be set to the specified default expressioneach time the function is called without supplying a value for the optional argument. In the above code, for example, one might expect that callingfoo()
repeatedly (i.e., without specifying a bar
argument) would always return'baz'
, since the assumption would be thateach time foo()
is called (without abar
argument specified)bar
is set to []
(i.e., a new empty list).
But let’s look at what actually happens when you do this:
>>> foo()["baz"]>>> foo()["baz", "baz"]>>> foo()["baz", "baz", "baz"]
Huh? Why did it keep appending the default value of "baz"
to an existing list each time foo()
was called, rather than creating anew list each time?
The answer is that the default value for a function argument is only evaluated once, at the time that the function is defined. Thus, thebar
argument is initialized to its default (i.e., an empty list) only whenfoo()
is first defined, but then calls to foo()
(i.e., without abar
argument specified) will continue to use the same list to whichbar
was originally initialized.
FYI, a common workaround for this is as follows:
>>> def foo(bar=None):... if bar is None:# or if not bar:... bar = []... bar.append("baz")... return bar...>>> foo()["baz"]>>> foo()["baz"]>>> foo()["baz"]
Common Mistake #2: Using class variables incorrectly
Consider the following example:
>>> class A(object):... x = 1...>>> class B(A):... pass...>>> class C(A):... pass...>>> print A.x, B.x, C.x1 1 1
Makes sense.
>>> B.x = 2>>> print A.x, B.x, C.x1 2 1
Yup, again as expected.
>>> A.x = 3>>> print A.x, B.x, C.x3 2 3
What the $%#!&?? We only changed A.x
. Why did C.x
change too?
In Python, class variables are internally handled as dictionaries and follow what is often referred to asMethod Resolution Order (MRO). So in the above code, since the attribute x
is not found in class C
, it will be looked up in its base classes (onlyA
in the above example, although Python supports multiple inheritance). In other words,C
doesn’t have its ownx
property, independent of A
. Thus, references to C.x
are in fact references to A.x
.
Common Mistake #3: Specifying parameters incorrectly for an exception block
Suppose you have the following code:
>>> try:... l = ["a", "b"]... int(l[2])... except ValueError, IndexError: # To catch both exceptions, right?... pass...Traceback (most recent call last): File "<stdin>", line 3, in <module>IndexError: list index out of range
The problem here is that the except
statement does not take a list of exceptions specified in this manner. Rather, In Python 2.x, the syntaxexcept Exception, e
is used to bind the exception to theoptional second parameter specified (in this casee
), in order to make it available for further inspection. As a result, in the above code, theIndexError
exception isnot being caught by the except
statement; rather, the exception instead ends up being bound to a parameter namedIndexError
.
The proper way to catch multiple exceptions in an except
statement is to specify the first parameter as atuple containing all exceptions to be caught. Also, for maximum portability(可移植性), use theas
keyword, since that syntax is supported by both Python 2 and Python 3:
>>> try:... l = ["a", "b"]... int(l[2])... except (ValueError, IndexError) as e: ... pass...>>>
Common Mistake #4: Misunderstanding Python scope rules
Python scope resolution is based on what is known as the LEGB rule, which is shorthand for Local, Enclosing,Global,Built-in. Seems straightforward enough, right? Well, actually, there are somesubtleties(微妙) to the way this works in Python. Consider the following:
>>> x = 10>>> def foo():... x += 1... print x...>>> foo()Traceback (most recent call last): File "<stdin>", line 1, in <module> File "<stdin>", line 2, in fooUnboundLocalError: local variable 'x' referenced before assignment
What’s the problem?
The above error occurs because, when you make an assignment to a variable in a scope,that variable is automatically considered by Python to be local to that scope and shadows any similarly named variable in any outer scope.
Many are thereby surprised to get an UnboundLocalError
in previously working code when it is modified by adding an assignment statement somewhere in the body of a function. (You can read more about thishere.)
It is particularly common for this to trip up developers when using lists. Consider the following example:
>>> lst = [1, 2, 3]>>> def foo1():... lst.append(5) # This works ok......>>> foo1()>>> lst[1, 2, 3, 5]>>> lst = [1, 2, 3]>>> def foo2():... lst += [5] # ... but this bombs!...>>> foo2()Traceback (most recent call last): File "<stdin>", line 1, in <module> File "<stdin>", line 2, in fooUnboundLocalError: local variable 'lst' referenced before assignment
Huh? Why did foo2
bomb while foo1
ran fine?
The answer is the same as in the prior example, but is admittedly more subtle.foo1
is not making anassignment to lst
, whereasfoo2
is. Remembering thatlst += [5]
is really just shorthand forlst = lst + [5]
, we see that we are attempting toassign a value tolst
(therefore presumed(假定) by Python to be in the local scope). However, the value we are looking to assign tolst
is based onlst
itself (again, now presumed to be in the local scope), which has not yet been defined. Boom.
Common Mistake #5: Modifying a list whileiterating(迭代) over it
The problem with the following code should be fairly obvious:
>>> odd = lambda x : bool(x % 2)>>> numbers = [n for n in range(10)]>>> for i in range(len(numbers)):... if odd(numbers[i]):... del numbers[i] # BAD: Deleting item from a list while iterating over it...Traceback (most recent call last): File "<stdin>", line 2, in <module>IndexError: list index out of range
Deleting an item from a list or array while iterating over it is a faux pas well known to any experienced software developer. But while the example above may be fairly obvious, even advanced developers can beunintentionally(无意地) bitten by this in code that is much more complex.
Fortunately, Python incorporates a number of elegant programming paradigms which, when used properly, can result in significantly simplified and streamlined code. A side benefit of this is that simpler code is less likely to be bitten by the accidental-deletion-of-a-list-item-while-iterating-over-it bug. One such paradigm is that of list comprehensions. Moreover, list comprehensions are particularly useful for avoiding this specific problem, as shown by this alternate implementation of the above code which works perfectly:
>>> odd = lambda x : bool(x % 2)>>> numbers = [n for n in range(10)]>>> numbers[:] = [n for n in numbers if not odd(n)] # ahh, the beauty of it all>>> numbers[0, 2, 4, 6, 8]
Common Mistake #6: Confusing how Python binds variables in closures
Considering the following example:
>>> def create_multipliers():... return [lambda x : i * x for i in range(5)]>>> for multiplier in create_multipliers():... print multiplier(2)...
You might expect the following output:
02468
But you actually get:
88888
Surprise!
This happens due to Python’s late binding behavior which says that the values of variables used in closures are looked up at the time the inner function is called. So in the above code, whenever any of the returned functions are called, the value of i
is looked up in the surrounding scope at the time it is called (and by then, the loop has completed, soi
has already been assigned its final value of 4).
The solution to this is a bit of a hack:
>>> def create_multipliers():... return [lambda x, i=i : i * x for i in range(5)]...>>> for multiplier in create_multipliers():... print multiplier(2)...02468
Voilà! We are taking advantage of default arguments here to generate anonymous functions in order to achieve the desired behavior. Some would call this elegant. Some would call it subtle. Some hate it. But if you’re a Python developer, it’s important to understand in any case.
Common Mistake #7: Creating circular module dependencies
Let’s say you have two files, a.py
and b.py
, each of which imports the other, as follows:
In a.py
:
import bdef f(): return b.xprint f()
And in b.py
:
import ax = 1def g(): print a.f()
First, let’s try importing a.py
:
>>> import a1
Worked just fine. Perhaps that surprises you. After all, we do have a circular import here whichpresumably(大概) should be a problem, shouldn’t it?
The answer is that the mere presence of a circular import is not in and of itself a problem in Python. If a module has already been imported, Python is smart enough not to try to re-import it. However, depending on the point at which each module is attempting to access functions or variables defined in the other, you may indeed run into problems.
So returning to our example, when we imported a.py
, it had no problem importingb.py
, sinceb.py
does not require anything from a.py
to be definedat the time it is imported. The only reference inb.py
to a
is the call to a.f()
. But that call is ing()
and nothing ina.py
or b.py
invokes g()
. So life is good.
But what happens if we attempt to import b.py
(without having previously importeda.py
, that is):
>>> import bTraceback (most recent call last): File "<stdin>", line 1, in <module> File "b.py", line 1, in <module> import a File "a.py", line 6, in <module>print f() File "a.py", line 4, in freturn b.xAttributeError: 'module' object has no attribute 'x'
Uh-oh(噢喔). That’s not good! The problem here is that, in the process of importingb.py
, it attempts to importa.py
, which in turn calls f()
, which attempts to accessb.x
. But b.x
has not yet been defined. Hence theAttributeError
exception.
At least one solution to this is quite trivial(不重要的). Simply modifyb.py
to importa.py
within g()
:
x = 1def g(): import a# This will be evaluated only when g() is called print a.f()
No when we import it, everything is fine:
>>> import b>>> b.g()1# Printed a first time since module 'a' calls 'print f()' at the end1# Printed a second time, this one is our call to 'g'
Common Mistake #8: Name clashing with Python Standard Library modules
One of the beauties of Python is the wealth of library modules that it comes with “out of the box”. But as a result, if you’re not consciously avoiding it, it’s not that difficult to run into a name clash between the name of one of your modules and a module with the same name in the standard library that ships with Python (for example, you might have a module namedemail.py
in your code, which would be in conflict with the standard library module of the same name).
This can lead to gnarly(多瘤的) problems, such as importing another library which in turns tries to import the Python Standard Library version of a module but, since you have a module with the same name, the other package mistakenly imports your version instead of the one within the Python Standard Library. This is where bad stuff happens.
Care should therefore be exercised to avoid using the same names as those in the Python Standard Library modules. It’s way easier for you to change the name of a module within your package than it is to file aPython Enhancement Proposal (PEP) to request a name change upstream and to try and get that approved.
Common Mistake #9: Failing to address differences between Python 2 and Python 3
Consider the following file foo.py
:
import sysdef bar(i): if i == 1: raise KeyError(1) if i == 2: raise ValueError(2)def bad(): e = None try: bar(int(sys.argv[1])) except KeyError as e: print('key error') except ValueError as e: print('value error') print(e)bad()
On Python 2, this runs fine:
$ python foo.py 1key error1$ python foo.py 2value error2
But now let’s give it a whirl on Python 3:
$ python3 foo.py 1key errorTraceback (most recent call last): File "foo.py", line 19, in <module> bad() File "foo.py", line 17, in bad print(e)UnboundLocalError: local variable 'e' referenced before assignment
What has just happened here? The “problem” is that, in Python 3, the exception object is not accessible beyond the scope of theexcept
block. (The reason for this is that, otherwise, it would keep a reference cycle with the stack frame in memory until the garbage collector runs andpurges(净化) the references from memory. More technical detail about this is availablehere).
One way to avoid this issue is to maintain a reference to the exception objectoutside the scope of theexcept
block so that it remains accessible. Here’s a version of the previous example that uses this technique, thereby yielding code that is both Python 2 and Python 3 friendly:
import sysdef bar(i): if i == 1: raise KeyError(1) if i == 2: raise ValueError(2)def good(): exception = None try: bar(int(sys.argv[1])) except KeyError as e: exception = e print('key error') except ValueError as e: exception = e print('value error') print(exception)good()
Running this on Py3k:
$ python3 foo.py 1key error1$ python3 foo.py 2value error2
Yippee!
(Incidentally, our Python Hiring Guide discusses a number of other important differences to be aware of when migrating code from Python 2 to Python 3.)
Common Mistake #10: Misusing the__del__
method
Let’s say you had this in a file called mod.py
:
import fooclass Bar(object): ... def __del__(self): foo.cleanup(self.myhandle)
And you then tried to do this from another_mod.py
:
import modmybar = mod.Bar()
You’d get an ugly AttributeError
exception.
Why? Because, as reported here, when the interpreter shuts down, the module’s global variables are all set toNone
. As a result, in the above example, at the point that__del__
is invoked, the name foo
has already been set toNone
.
A solution would be to use atexit.register()
instead. That way, when your program is finished executing (when exiting normally, that is), your registered handlers are kicked offbefore the interpreter is shut down.
With that understanding, a fix for the above mod.py
code might then look something like this:
import fooimport atexitdef cleanup(handle): foo.cleanup(handle)class Bar(object): def __init__(self): ... atexit.register(cleanup, self.myhandle)
This implementation provides a clean and reliable way of calling any needed cleanup functionality upon normal program termination. Obviously, it’s up tofoo.cleanup
to decide what to do with the object bound to the nameself.myhandle
, but you get the idea.
Wrap-up
Python is a powerful and flexible language with many mechanisms and paradigms that can greatly improve productivity. As with any software tool or language, though, having a limited understanding or appreciation of its capabilities can sometimes be more of an impediment(口吃) than a benefit, leaving one in theproverbial(谚语的) state of “knowing enough to be dangerous”.
Familiarizing(熟悉) oneself with the keynuances(细微差别) of Python, such as (but by no means limited to) the issues raised in this article, will help optimize use of the language while avoiding some of its more commonpitfalls(陷阱).
You might also want to check out our Insider’s Guide to Python Interviewing for suggestions on interview questions that can help identify Python experts.
We hope you’ve found the pointers in this article helpful and welcome your feedback.
- Python程序员常犯的十个错误
- 十个Python程序员易犯的错误
- 编程新手常犯的十个错误
- Java开发者常犯的十个错误
- 学习PHP常犯的十个错误
- Python 程序员常犯的 10 个错误
- Python程序员常犯的10个错误
- 十个JAVA程序员容易犯的错误
- 每个程序员都会犯的十个错误
- 十个JAVA程序员容易犯的错误
- java程序员常犯的几个错误
- Java程序员常犯的几个错误
- 新手程序员常犯的几个错误
- 使用Ajax时的十个常犯的错误
- 使用Ajax时的十个常犯的错误
- 使用Ajax时的十个常犯的错误
- 使用Ajax时的十个常犯的错误
- 使用Ajax时的十个常犯的错误
- mina 框架java服务端的搭建和通信。
- UVA 101(栈模拟)
- java--获取图片效率差异
- 在Fragment当中使用的startactivityforresult注意事项
- 设计模式2——抽象工厂
- Python程序员常犯的十个错误
- mysql将查询结果为空的栏目转为0
- 单元测试工具
- VC C++ 遍历指定目录 Windows API
- 简洁代码之数组排序
- Leetcode 细节实现 Pascal's Triangle
- minicom使用教程(Linux下超级终端)
- Unity3D 预编译相关宏定义
- “人月神话”摘录