Hadoop源码解析之: TextInputFormat如何处理跨split的行

来源:互联网 发布:爱的归宿网络电影 编辑:程序博客网 时间:2024/03/28 22:14

我们知道hadoop将数据给到map进行处理前会使用InputFormat对数据进行两方面的预处理:

  •  对输入数据进行切分,生成一组split,一个split会分发给一个mapper进行处理。
  •  针对每个split,再创建一个RecordReader读取Split内的数据,并按照<key,value>的形式组织成一条record传给map函数进行处理。

最常见的FormatInput就是TextInputFormat,在split的读取方面,它是将给到的Split按行读取,以行首字节在文件中的偏移做key,以行数据做value传给map函数处理,这部分的逻辑是由它所创建并使用的RecordReader:LineRecordReader封装和实现的.关于这部分逻辑,在一开始接触hadoop时会有一个常见的疑问:如果一个行被切分到两个split里(这几乎是一定会发生的情况),TextInputFormat是如何处理的?如果是生硬地把一行切割到两个split里,是对数据的一种破坏,可能会影响数据分析的正确性(比如word count就是一个例子).搞清楚这个问题还是需要从源码入手了解TextInputFormat的详细工作方式,这里简单地梳理记录如下(本文参考的是hadoop1.1.2的源码):


1. LineRecordReader会创建一个org.apache.hadoop.util.LineReader实例,并依赖这个LineReader的readLine方法来读取一行记录,具体可参考org.apache.hadoop.mapred.LineRecordReader.next(LongWritable, Text),Line 176),那么关键的逻辑就在这个readLine方法里了,下面是添加了额外中文注释的该方法源码.这个方法主要的逻辑归纳起来是3点:

  • 总是是从buffer里读取数据,如果buffer里的数据读完了,先加载下一批数据到buffer
  • 在buffer中查找"行尾",将开始位置至行尾处的数据拷贝给str(也就是最后的Value).如果为遇到"行尾",继续加载新的数据到buffer进行查找.
  • 关键点在于:给到buffer的数据是直接从文件中读取的,完全不会考虑是否超过了split的界限,而是一直读取到当前行结束为
/**   * Read one line from the InputStream into the given Text.  A line   * can be terminated by one of the following: '\n' (LF) , '\r' (CR),   * or '\r\n' (CR+LF).  EOF also terminates an otherwise unterminated   * line.   *   * @param str the object to store the given line (without newline)   * @param maxLineLength the maximum number of bytes to store into str;   *  the rest of the line is silently discarded.   * @param maxBytesToConsume the maximum number of bytes to consume   *  in this call.  This is only a hint, because if the line cross   *  this threshold, we allow it to happen.  It can overshoot   *  potentially by as much as one buffer length.   *   * @return the number of bytes read including the (longest) newline   * found.   *   * @throws IOException if the underlying stream throws   */  public int readLine(Text str, int maxLineLength,                      int maxBytesToConsume) throws IOException {    /* We're reading data from in, but the head of the stream may be     * already buffered in buffer, so we have several cases:     * 1. No newline characters are in the buffer, so we need to copy     *    everything and read another buffer from the stream.     * 2. An unambiguously terminated line is in buffer, so we just     *    copy to str.     * 3. Ambiguously terminated line is in buffer, i.e. buffer ends     *    in CR.  In this case we copy everything up to CR to str, but     *    we also need to see what follows CR: if it's LF, then we     *    need consume LF as well, so next call to readLine will read     *    from after that.     * We use a flag prevCharCR to signal if previous character was CR     * and, if it happens to be at the end of the buffer, delay     * consuming it until we have a chance to look at the char that     * follows.     */    str.clear();    int txtLength = 0; //tracks str.getLength(), as an optimization    int newlineLength = 0; //length of terminating newline    boolean prevCharCR = false; //true of prev char was CR    long bytesConsumed = 0;    do {      int startPosn = bufferPosn; //starting from where we left off the last time  //如果buffer中的数据读完了,先加载一批数据到buffer里      if (bufferPosn >= bufferLength) {        startPosn = bufferPosn = 0;        if (prevCharCR)          ++bytesConsumed; //account for CR from previous read        bufferLength = in.read(buffer);        if (bufferLength <= 0)          break; // EOF      }  //注意:这里的逻辑有点tricky,由于不同操作系统对“行结束符“的定义不同:  //UNIX: '\n'  (LF)  //Mac:  '\r'  (CR)  //Windows: '\r\n'  (CR)(LF)  //为了准确判断一行的结尾,程序的判定逻辑是:  //1.如果当前符号是LF,可以确定一定是到了行尾,但是需要参考一下前一个  //字符,因为如果前一个字符是CR,那就是windows文件,“行结束符的长度”  //(即变量:newlineLength,这个变量名起的有点糟糕)应该是2,否则就是UNIX文件,“行结束符的长度”为1。  //2.如果当前符号不是LF,看一下前一个符号是不是CR,如果是也可以确定一定上个字符就是行尾了,这是一个mac文件。  //3.如果当前符号是CR的话,还需要根据下一个字符是不是LF判断“行结束符的长度”,所以只是标记一下prevCharCR=true,供读取下个字符时参考。      for (; bufferPosn < bufferLength; ++bufferPosn) { //search for newline        if (buffer[bufferPosn] == LF) {          newlineLength = (prevCharCR) ? 2 : 1;          ++bufferPosn; // at next invocation proceed from following byte          break;        }        if (prevCharCR) { //CR + notLF, we are at notLF          newlineLength = 1;          break;        }        prevCharCR = (buffer[bufferPosn] == CR);      }      int readLength = bufferPosn - startPosn;      if (prevCharCR && newlineLength == 0)        --readLength; //CR at the end of the buffer      bytesConsumed += readLength;      int appendLength = readLength - newlineLength;      if (appendLength > maxLineLength - txtLength) {        appendLength = maxLineLength - txtLength;      }      if (appendLength > 0) {        str.append(buffer, startPosn, appendLength);        txtLength += appendLength;       }//newlineLength == 0 就意味着始终没有读到行尾,程序会继续通过文件输入流继续从文件里读取数据。      //这里有一个非常重要的地方:in的实例创建自构造函数:org.apache.hadoop.mapred.LineRecordReader.LineRecordReader(Configuration, FileSplit)      //第86行:FSDataInputStream fileIn = fs.open(split.getPath()); 我们看以看到:      //对于LineRecordReader:当它对取“一行”时,一定是读取到完整的行,不会受filesplit的任何影响,因为它读取是filesplit所在的文件,而不是限定在filesplit的界限范围内。      //所以不会出现“断行”的问题!    } while (newlineLength == 0 && bytesConsumed < maxBytesToConsume);    if (bytesConsumed > (long)Integer.MAX_VALUE)      throw new IOException("Too many bytes before newline: " + bytesConsumed);        return (int)bytesConsumed;  }


 

2. 按照readLine的上述行为,在遇到跨split的行时,会到下一个split继续读取数据直至行尾,那么下一个split怎么判定开头的一行有没有被上一个split的LineRecordReader读取过从而避免漏读或重复读取开头一行呢?这方面LineRecordReader使用了一个简单而巧妙的方法:既然无法断定每一个split开始的一行是独立的一行还是被切断的一行的一部分,那就跳过每个split的开始一行(当然要除第一个split之外),从第二行开始读取,然后在到达split的结尾端时总是再多读一行,这样数据既能接续起来又避开了断行带来的麻烦.以下是相关的源码:

在LineRecordReader的构造函数org.apache.hadoop.mapred.LineRecordReader.LineRecordReader(Configuration, FileSplit) 108到113行确定start位置时,明确注明::会特别地忽略掉第一行!

// If this is not the first split, we always throw away first record    // because we always (except the last split) read one extra line in    // next() method.    if (start != 0) {      start += in.readLine(new Text(), 0, maxBytesToConsume(start));    }


相应地,在LineRecordReader判断是否还有下一行的方法:org.apache.hadoop.mapred.LineRecordReader.next(LongWritable, Text) 170到173行中,while使用的判定条件是:当前位置小于或等于split的结尾位置,也就说:当当前以处于split的结尾位置上时,while依然会执行一次,这一次读到显然已经是下一个split的开始行了!

    // We always read one extra line, which lies outside the upper    // split limit i.e. (end - 1)    while (getFilePosition() <= end) {...


小结:

至此,跨split的行读取的逻辑就完备了.如果引申地来看,这是map-reduce前期数据切分的一个普遍性问题,即不管我们用什么方式切分和读取一份大数据中的小部分,包括我们在实现自己的InputFormat时,都会面临在切分处数据时的连续性解析问题. 对此我们应该深刻地认识到:split最直接的现实作用是取出大数据中的一小部分给mapper处理,但这只是一种"逻辑"上的,"宏观"上的切分,在"微观"上,在split的首尾切分处,为了确保数据连续性,跨越split接续并拼接数据也是完全正当和合理的.

0 0
原创粉丝点击