Writing a Linux device driver
来源:互联网 发布:小说分销平台源码 编辑:程序博客网 时间:2024/04/19 07:44
Does the idea of writing a Linux device driver sound difficult? If
you have some basic programming experience, the task is
simpler than you think. Get started with this quick primer on
device driver programming.
What do I need to know about writing drivers?
Basic knowledge of kernel compilation, a good deal of programming
experience in C under Linux and lastly, the right techniques of data
structures, like linked list is essential along with their data types.
The first thing a programmer must know before attempting to write a
driver, is to know how the Linux kernel source compiles, paying attention
to the compilation process (the gcc compiler flags).
Choosing the device type
a) Block drivers
A block device is something that can host a filesystem such as a disk. A
block device can only be accessed as multiples of a block, where a block
is usually one kilobyte of data .
b) Character drivers
A character device is one that can be accessed like a file, and a char
driver is in charge of implementing this behaviour. This driver implements
the open, close, read and write system calls. The console and parallel
ports are examples of char devices.
Device drivers in Linux are known as modules and can be loaded dynamically
into the kernel using the insmod command.
A single module can be compiled alone, and also can be linked to the
kernel (here, care has to be taken on the type of driver).
eg: A simple module
#define MODULE
#include <linux/module.h>
int init_module (void) /* Loads a module in the kernel */
{
printk("Hello kernel n");
return 0;
}
void cleanup_module(void) /* Removes module from kernel */
{
printk("GoodBye Kerneln");
}
Compiling the module
# gcc -c hello.c
# insmod hello.o
The output is
Hello kernel
# rmmod hello.o
GoodBye Kernel
(注:这个例子放到2.6.x的内核下是不行的,内核模块改为xxx.ko文件具体是从哪个版本开始的,我还不知。希望有知道的能告诉我,谢谢!这里有举一个可以在2.6.x下运行的"Hello, world!",我在Fedora 5(
eg: A simple module
#include <linux/init.h>
#include <linux/module.h>
MODULE_LICENSE("Dual BSD/GPL");
static int hello_init(void)
{
printk(KERN_ALERT "Hello, world/n");
return 0;
}
static void hello_exit(void)
{
printk(KERN_ALERT "Goodbye, cruel world/n");
}
module_init(hello_init);
module_exit(hello_exit);
Makefile
obj-m := hello.o
KERNELDIR ?= /lib/modules/$(shell uname -r)/build
PWD := $(shell pwd)
all:
$(MAKE) -C $(KERNELDIR) M=$(PWD)
clean:
rm -rf *.o *~ core .depend .*.cmd *.ko *.mod.c .tmp_versions
此例出自<<Linux Device Drivers, Third Edition>>中的第二章.
注完!)
init_module loads the relocated module image into kernel space and runs
the module's init function.
How init_module works?
The module image begins with a module structure and is followed by code
and data as appropriate.
The module structure is defined as follows:
struct module
{
unsigned long size_of_struct;
struct module *next;
const char *name;
unsigned long size;
long usecount;
unsigned long flags;
unsigned int nsyms;
unsigned int ndeps;
struct module_symbol *syms;
struct module_ref *deps;
struct module_ref *refs;
int (*init)(void);
void (*cleanup)(void);
const struct exception_table_entry *ex_table_start;
const struct exception_table_entry *ex_table_end;
#ifdef __alpha__
unsigned long gp;
#endif
};
All of the pointer fields, with the exception of next and refs, are
expected to point within the module body and be initialized as appropriate
for kernel space, i.e. relocated with the rest of the module.
Return Values
On success, zero is returned. On error, -1 is returned
and errno is set appropriately.
Errors
EPERM The user is not the superuser.
ENOENT No module by that name exists.
EINVAL Some image slot filled in incorrectly, image->name
does not correspond to the original module name,
some image->deps entry does not correspond to a
loaded module, or some other similar inconsistency.
EBUSY The module's initialization routine failed.
EFAULT name or image is outside the program's accessible
address space.
cleanup_module attempts to remove an unused loadable module entry. If
name is NULL, all unused modules marked auto clean will be removed.
How cleanup_module works?
Return Values
On success, zero is returned. On error, -1 is returned and errno is
set appropriately.
Errors
EPERM The user is not the superuser.
ENOENT No module by that name exists.
EINVAL name was the empty string.
EBUSY The module is in use.
EFAULT name is outside the program's accessible address
space.
This simple module is called skull, short for Simple Kernel Utility For
Loading Localities.
General flags used for compiling any driver are
-D__KERNEL__ _DMODULE -O -Wall -I$(INCLUDEDIR)
Note: The INCLUDEDIR should contain the header files of the kernel source.
Module code has to be recompiled for each version of the kernel that it
will be linked to. Each module defines a symbol called kernel_version
which is defined in <linux/module.h>. In case of a version mismatch, use
the insmod -f (force) option to load the module.
Posted: ( 2000-11-13 22:10:47 EST by )
原文地址:http://www.freeos.com/articles/2677/
- Writing a Linux device driver
- Writing a Linux device driver
- Writing a SCSI Device Driver
- Writing a Linux device driver module for kernels 3.0 or 2.6 with udev
- Writing a Linux device driver module for kernels 2.6 or later with udev
- Writing Solaris Device Driver: DMA
- Writing Solaris Device Driver: Basic
- Writing Solaris Device Driver: Multithreading
- Writing Solaris Device Driver: Properties
- Writing Solaris Device Driver: Driver Autoconfiguration
- Writing Solaris Device Driver: Layered Driver Interface
- Writing Solaris Device Driver: Device Context Management
- Writing a Network Driver
- writing linux driver
- Writing device drivers in Linux: A brief tutorial
- Writing device drivers in Linux: A brief tutorial (1)
- Writing device drivers in Linux: A brief tutorial(一)
- Writing device drivers in Linux: A brief tutorial(二)
- Linux 系统内核的调试
- 如何在激活某个View时把简单对象(T类)做为参数进行传递
- 15天学会jQuery
- 开始写代码STEP_4
- 必须掌握的八个DOS命令!-----摘自天涯恨客的博客
- Writing a Linux device driver
- 最近要学习的:
- UNIX 高手的 10 个习惯
- 关于ssh端口转发的深入实例
- 读--龙应台:在“仰德大道”上
- 技术的滥用
- (转)JAVA常见异常
- 根据IP获取当地天气预报的实现
- 内存碎片处理技术