Cent os 6.4 Cobbler搭建

来源:互联网 发布:python公约数 编辑:程序博客网 时间:2024/03/29 00:21

刚进公司,听同事提到cobbler,之前只知道有个PXE,后来在网上查找了一些资料,自己找了台服务器测试了一下

Cobbler



             部署环境 :  
                                 cobbler-server dell PowerEdge C6220
                                 cobbler-server OS   Centos6.4
                                 cobbler_server ip : 192.168.1.100


cobbler安装环境:


1、安装epel
wget http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm
sudo rpm -Uvh epel-release-6*.rpm
2、服务安装
yum -y install cobbler httpd rsync tftp xinetd dhcp cman pykickstart
3、修改cobbler配置文件 /etc/cobbler/settings
sed -i 's/manage_dhcp: 0/manage_dhcp: 1/' /etc/cobbler/settings    #开启dhcp功能
sed -i 's/manage_rsync: 0/manage_rsync: 1/' /etc/cobbler/settings  #开启rsync功能
sed -i 's/next_server: 127.0.0.1/next_server: 192.168.1.100/' /etc/cobbler/settings  #设置你的 tftp server 地址
sed -i 's/server: 127.0.0.1/server: 192.168.1.100/' /etc/cobbler/settings   #cobbler_server 地址
4、开启cobbler服务前需要做
service iptables stop #关闭防火墙
setenforce 0 #关闭selinux
/etc/xinetd.d/tftp
disable                 = no #开启tftp服务
/etc/xinetd.d/rsync
disable                 = no #开启 rsync 服务
openssl passwd -1 -salt 'cocosoa' '00001234' 生成系统安装后的 root 密码,cocosoa是干扰密码,00001234是系统登录密码
vim /etc/cobbler/settings 编辑配置文件,将默认的密码替换为新生成的
default_password_crypted: "$1$cocosoa$oAeSzE7VLKwhMPiBEOJD81"

cobbler get-loaders    #下载引导操作系统文件

 yum install debmirror -y
vim /etc/debmirror.conf
#@dists="sid";    // 注销
#@arches="i386";    // 注销
配置dhcp服务,只需要修改cobbler的dhcp模板文件即可
vim /etc/cobbler/dhcp.template


subnet 192.168.1.0 netmask 255.255.255.0 {
     option routers             192.168.1.5;
     option domain-name-servers 192.168.1.1;
     option subnet-mask         255.255.255.0;
     range dynamic-bootp        192.168.1.100 192.168.1.254;
     default-lease-time         21600;
     max-lease-time             43200;
     next-server                192.168.1.122;
     class "pxeclients" {
          match if substring (option vendor-class-identifier, 0, 9) = "PXEClient";
          if option pxe-system-type = 00:02 {
                  filename "ia64/elilo.efi";
          } else if option pxe-system-type = 00:06 {
                  filename "grub/grub-x86.efi";
          } else if option pxe-system-type = 00:07 {
                  filename "grub/grub-x86_64.efi";
          } else {
                  filename "pxelinux.0";
          }
     }


}


注意修改之后,使用cobbler sync 同步下配置文件,不然dhcp无法启动,会报错

5、启动服务
service httpd start 在配置文件中加入ServerName localhost:80
service cobbler start
chkconfig httpd on
chkconfig cobblerd on
chkconfig dhcpd on
chkconfig xinetd on
chkconfig tftp on
chkconfig iptables off
6、导入镜像
cobbler import --path=/media --name=CentOS6.4 --arch=x86_64
touch /var/lib/cobbler/kickstarts/CentOS6.4.ks
cobbler profile add --name=centos6.4 --distro=CentOS6.4-x86_64 --kickstart=/var/lib/cobbler/kickstarts/CentOS6.4.ks
添加一个profile文件,并使用CentOS6.4-x86_64这个distro,并指定相应的ks文件,ks文件是事先准备好的
vim /etc/cobbler/pxe/pxedefault.template    #编辑pxe模板
ONTIMEOUT centos6.4         #修改默认安装的profile为centos6.4,也就是说当你没有选择,超时操作后自动安装此profile
7、编辑kickstarts文件     #可以自己写
vim /var/lib/cobbler/kickstarts/CentOS6.4.ks
install
auth --useshadow --enablemd5
key --skip
bootloader --location=mbr
clearpart --all --initlabel
text
firewall --disabled
keyboard us
lang en_US
url --url=$tree
reboot
rootpw --iscrypted $1$cocosoa$oAeSzE7VLKwhMPiBEOJD81
selinux --disabled
timezone --isUtc Asia/Shanghai
zerombr
autopart

%packages

$SNIPPET('package')

cat /var/lib/cobbler/snippets/package

此文件里写入需要安装的包


下面是扩展目录,可以自己添加单独的配置文件,方便管理

/var/lib/cobbler/snippets

$SNIPPET (文件名)  该文件要到/var/lib/cobbler/snippets下创建编辑。



# System authorization information 
auth --useshadow --enablemd #用户登录认证 
# System bootloader configuration 
bootloader --location=mbr #mbr引导 
# Partition clearing information 
clearpart --all --initlabel #默认清除所以分区 
# Use text mode install 
text #默认以文本模式安装 
# Firewall configuration 
firewall --enabled #防火墙默认开启 
# Run the Setup Agent on first boot 
firstboot --disable #禁用启动代理 
# System keyboard 
keyboard us #默认英文键盘 
# System language 
lang en_US #默认语言英文 
# Use network installation 
url --url=$tree #网络安装路径 
# If any cobbler repo definitions were referenced in the kickstart profile, include them here 
$yum_repo_stanza #默认的yum仓库 
# Network information 
$SNIPPET('network_config')  
# Reboot after installation 
reboot #安装完成后重启
#Root password 
rootpw --iscrypted $default_password_crypted #密码是我们/etc/cobbler/settings设置密码 
# SELinux configuration 
selinux --disabled #默认关闭selinux 
# Do not configure the X Window System 
skipx #默认没有安装图形界面  
# System timezone 
timezone America/New_York #默认时区是美国/纽约 
# Install OS instead of upgrade 
install #定义的是安装系统而不是升级系统 
# Clear the Master Boot Record 
zerombr #默认清空所有的mbr 
# Allow anaconda to partition the system as needed 
autopart #默认自动分区

IT交流群144486234

1 0