Linux下查看IP地址的命令

来源:互联网 发布:马钢h型钢数据对照表 编辑:程序博客网 时间:2024/03/29 02:46
ifconfig
Linux下查看IP地址的命令--ifconfig
ifconfig命令用于查看和更改网络接口的地址和参数 
$ifconfig -a  
lo0: flags=849 mtu 8232 
          inet 127.0.0.1 netmask ff000000  
hme0: flags=863 mtu 1500 
          inet 211.101.149.11 netmask ffffff00 broadcast 211.101.149.255 
          ether 8:0:20:a7:4d:21  
系统会显示网络接口的名称,接口的状态(up or down),  
接口的IP地址和掩码等信息

更改网络接口的IP地址: 
#ifconfig hme0 down  
#ifconfig hme0 211.101.149.233 netmask 255.255.255.0 up  
首先,使用down命令参数把网络接口hme0的服务暂时停止,然后再用ifconfig命令给 
       接口分配新的IP地址和掩码,并启动网络接口服务 
          也可以通过改变文件/etc/hosts中的IP地址的值并重新启动系统来更改机器的IP地址。 
       /etc/hosts/: 
       211.101.149.11    sampdt 
        定义主机名在/etc/hostname.hme0及IP地址。 
更改了网卡/增加了网卡,系统不能自动启动该接口服务,这时需要手动创建网口服务: 
#ifconfig hme0 plumb  
即可以为接口le0创建网口服务 
相应地,用ifconfig带unplumb参数可以停止服务并关闭网络.

netconfig 用来设置IP地址

0 0