matplotlib.pyplot.plot(*args, **kwargs)
来源:互联网 发布:注会考试网络培训哪好 编辑:程序博客网 时间:2024/06/06 09:44
matplotlib.pyplot.
plot
(*args, **kwargs)
Plot lines and/or markers to the Axes
. args is a variable length argument, allowing for multiple x, y pairs with an optional format string. For example, each of the following is legal:
plot(x, y) # plot x and y using default line style and colorplot(x, y, 'bo') # plot x and y using blue circle markersplot(y) # plot y using x as index array 0..N-1plot(y, 'r+') # ditto, but with red plusses
If x and/or y is 2-dimensional, then the corresponding columns will be plotted.
If used with labeled data, make sure that the color spec is not included as an element in data, as otherwise the last case plot("v","r",data={"v":..., "r":...)
can be interpreted as the first case which would do plot(v, r)
using the default line style and color.
If not used with labeled data (i.e., without a data argument), an arbitrary number of x, y, fmt groups can be specified, as in:
a.plot(x1, y1, 'g^', x2, y2, 'g-')
Return value is a list of lines that were added.
By default, each line is assigned a different style specified by a ‘style cycle’. To change this behavior, you can edit the axes.prop_cycle rcParam.
The following format string characters are accepted to control the line style or marker:
'-'
solid line style'--'
dashed line style'-.'
dash-dot line style':'
dotted line style'.'
point marker','
pixel marker'o'
circle marker'v'
triangle_down marker'^'
triangle_up marker'<'
triangle_left marker'>'
triangle_right marker'1'
tri_down marker'2'
tri_up marker'3'
tri_left marker'4'
tri_right marker's'
square marker'p'
pentagon marker'*'
star marker'h'
hexagon1 marker'H'
hexagon2 marker'+'
plus marker'x'
x marker'D'
diamond marker'd'
thin_diamond marker'|'
vline marker'_'
hline markerThe following color abbreviations are supported:
In addition, you can specify colors in many weird and wonderful ways, including full names ('green'
), hex strings ('#008000'
), RGB or RGBA tuples ((0,1,0,1)
) or grayscale intensities as a string ('0.8'
). Of these, the string specifications can be used in place of a fmt
group, but the tuple forms can be used only as kwargs
.
Line styles and colors are combined in a single format string, as in 'bo'
for blue circles.
The kwargs can be used to set line properties (any property that has a set_*
method). You can use this to set a line label (for auto legends), linewidth, anitialising, marker face color, etc. Here is an example:
plot([1,2,3], [1,2,3], 'go-', label='line 1', linewidth=2)plot([1,2,3], [1,4,9], 'rs', label='line 2')axis([0, 4, 0, 10])legend()
If you make multiple lines with one plot command, the kwargs apply to all those lines, e.g.:
plot(x1, y1, x2, y2, antialiased=False)
Neither line will be antialiased.
You do not need to use format strings, which are just abbreviations. All of the line properties can be controlled by keyword arguments. For example, you can set the color, marker, linestyle, and markercolor with:
plot(x, y, color='green', linestyle='dashed', marker='o', markerfacecolor='blue', markersize=12).
See Line2D
for details.
The kwargs are Line2D
properties:
Property Description agg_filter
unknownalpha
float (0.0 transparent through 1.0 opaque)animated
[True | False]antialiased
or aa[True | False]axes
anAxes
instanceclip_box
amatplotlib.transforms.Bbox
instanceclip_on
[True | False]clip_path
[ (Path
,Transform
) |Patch
| None ]color
or cany matplotlib colorcontains
a callable functiondash_capstyle
[‘butt’ | ‘round’ | ‘projecting’]dash_joinstyle
[‘miter’ | ‘round’ | ‘bevel’]dashes
sequence of on/off ink in pointsdrawstyle
[‘default’ | ‘steps’ | ‘steps-pre’ | ‘steps-mid’ | ‘steps-post’]figure
amatplotlib.figure.Figure
instancefillstyle
[‘full’ | ‘left’ | ‘right’ | ‘bottom’ | ‘top’ | ‘none’]gid
an id stringlabel
string or anything printable with ‘%s’ conversion.linestyle
or ls[‘solid’ | ‘dashed’, ‘dashdot’, ‘dotted’ | (offset, on-off-dash-seq) |'-'
|'--'
|'-.'
|':'
|'None'
|' '
|''
]linewidth
or lwfloat value in pointsmarker
A valid marker style
markeredgecolor
or mecany matplotlib colormarkeredgewidth
or mewfloat value in pointsmarkerfacecolor
or mfcany matplotlib colormarkerfacecoloralt
or mfcaltany matplotlib colormarkersize
or msfloatmarkevery
[None | int | length-2 tuple of int | slice | list/array of int | float | length-2 tuple of float]path_effects
unknownpicker
float distance in points or callable pick functionfn(artist, event)
pickradius
float distance in pointsrasterized
[True | False | None]sketch_params
unknownsnap
unknownsolid_capstyle
[‘butt’ | ‘round’ | ‘projecting’]solid_joinstyle
[‘miter’ | ‘round’ | ‘bevel’]transform
amatplotlib.transforms.Transform
instanceurl
a url stringvisible
[True | False]xdata
1D arrayydata
1D arrayzorder
any number
kwargs scalex and scaley, if defined, are passed on to autoscale_view()
to determine whether the x and y axes are autoscaled; the default is True.
Note
In addition to the above described arguments, this function can take a data keyword argument. If such a data argument is given, the following arguments are replaced by data[<arg>]:
- All arguments with the following names: ‘x’, ‘y’.
- matplotlib.pyplot.plot(*args, **kwargs)
- matplotlib.pyplot.savefig(*args, **kwargs)保存图片$close()关闭图片
- matplotlib.pyplot.plot()参数详解
- matplotlib.pyplot.plot()参数详解
- 二、Matplotlib系列---pyplot的plot( )函数
- *args **kwargs
- '*','*args','**','**kwargs'
- matplotlib.pyplot
- matplotlib.pyplot
- pyplot的plot函数
- 什么是*args和**kwargs?
- Python *args 和 **kwargs
- python *args and * kwargs
- 【python】args kwargs 用法
- python *args和**kwargs
- python *args **kwargs
- python *args **kwargs
- 理解'*','*args','**','**kwargs'
- 'my_templatetag' is not a registered tag library.
- 0506
- MySQL修改密码
- Python字符串操作
- Lock框架简介
- matplotlib.pyplot.plot(*args, **kwargs)
- Yocto介绍
- Python 3基础教程17-提问频率较高的几个Python问题
- oracle游标使用
- 存储系统的块关联挖掘C-Miner算法
- Eclipse中采用本地作业运行器(Job Runner)运行Hadoop测试(Hadoop2.7.3)
- Python常用开源工具包
- 为什么正确的关闭TCP连接
- 《C语言程序开发范例宝典》-基础