Linux下网络操作命令
来源:互联网 发布:iphone软件排行 编辑:程序博客网 时间:2024/06/01 09:57
mii-tool -v //查看网卡工作模式
mii-tool -F 100baseTx-FD eth0 //将eth0改为100M,全双工工作模式
mii-tool -r eth0 //恢复网卡工作模式
ethtool eth0 //查询网卡基本设置
ethtool -s eth0 autoneg off speed 100 duplex full //eth0设置为:100M,全双工,非协商
2. 网卡配置
ifconfig -h //打印帮助信息
ifconfig -a //打印当前网卡信息
ifconfig eth0 192.168.0.1 netmask 255.255.255.0 //设置eth0 IP及掩码
ifconfig eth0:0 192.168.0.2 netmask 255.255.255.0 //设置eth0的第二个IP
ifconfig eth0:1 down //禁用eth0:0
ifconfig eth0 up //启用eth0
ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx //修改网卡MAC地址
ifconfig eth0 promisc //设置网卡工作于混杂模式下
iwconfig eth0 essid "tao" //设置无线网卡的essid为“tao”
iwconfig eth0 mode Managed //设置无线网卡工作在Managed模式下
iwconfig eth0 mode Ad-hoc //设置无线网卡工作在Ad-hoc模式下
iwconfig eth0 freq 2.422G //设置无线网卡工作频率
附加:网络介质类型100BASE-TX指的是使用两对非屏蔽双绞线接线或者屏蔽双绞线接线的100Mbit/s基带快速以太网规范。
1000/100一般代表该网络所支持的最高数据传输速率为1000Mbp。
base表示基带传输
t表示的是物理层介质,这里是双绞线(一对,只能工作于单工模式,一根代表低电平,一根代表高电平)
tx表示是物理层介质, 这里是双绞线(两对,一对收一对发)
SX代表短波长传输
FX代表光纤传输
TX代表采用双绞线传输
Port Speed
Description
10baseT-HD
10 megabit half duplex
10baseT-FD
10 megabit full duplex
100baseTx-HD
100 megabit half duplex
100baseTx-FD
100 megabit full duplex
1)dmesg | grep -i eth
2) ethtool eth1
Settings for eth1:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 32
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbg
Wake-on: d
Current message level: 0x00000007 (7)
Link detected: yes //表示物理口up
Settings for eth1:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 32
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbg
Wake-on: d
Current message level: 0x00000007 (7)
Link detected: yes //表示物理口up
查看网络实时带宽
在linux的proc文件系统中,通过查看/proc/net/dev文件
可以得到每个网络接口的吞吐量,但是无法获得实时带宽
可以得到每个网络接口的吞吐量,但是无法获得实时带宽
阅读全文
0 0
- Linux下网络操作命令
- Linux 网络操作命令
- Linux网络操作命令
- linux 网络操作命令
- linux 网络操作命令
- linux 网络操作命令
- Linux 命令-网络操作命令
- linux下网络命令
- Linux基本网络操作命令
- linux 网络操作相关命令
- linux网络操作相关命令
- linux基本网络操作命令
- Linux常见网络操作命令
- linux命令整理6:网络操作命令
- linux下常用网络命令
- Linux 下网络相关命令
- Linux下的网络命令
- Linux下常用命令-网络命令
- 模板
- Kotlin基本语法(译)
- Android:LinearLayout布局中Layout_weight的深刻理解
- python语法注意点(更新中)
- 安卓怎么进入adb shell
- Linux下网络操作命令
- 互联网架构(5):并发编程--锁
- 不要黄泛区及东北人?地域歧视谁之责
- 裸机Ubuntu16.04配置Dlib19.4 (Python人脸检测例子)
- 文章标题
- C++/MFC-Progress
- C语言实现链表(一)
- eclipse异常关闭,如何关闭tomcat
- Tomcat 内存溢出对应解决方式