xargs命令
来源:互联网 发布:铁路四等站 知乎 编辑:程序博客网 时间:2024/06/06 01:36
在使用 find命令的-exec选项处理匹配到的文件时, find命令将所有匹配到的文件一起传递给exec执行。但有些系统对能够传递给exec的命令长度有限制,这样在find命令运行几分钟之后,就会出现溢出错误。错误信息通常是“参数列太长”或“参数列溢出”。这就是xargs命令的用处所在,特别是与find命令一起使用。
find命令把匹配到的文件传递给xargs命令,而xargs命令每次只获取一部分文件而不是全部,不像-exec选项那样。这样它可以先处理最先获取的一部分文件,然后是下一批,并如此继续下去。
在有些系统中,使用-exec选项会为处理每一个匹配到的文件而发起一个相应的进程,并非将匹配到的文件全部作为参数一次执行;这样在有些情况下就会出现进程过多,系统性能下降的问题,因而效率不高; 而使用xargs命令则只有一个进程。另外,在使用xargs命令时,究竟是一次获取所有的参数,还是分批取得参数,以及每一次获取参数的数目都会根据该命令的选项及系统内核中相应的可调参数来确定。
普及以下,管道符与xargs的区别:
管道是实现“将前面的标准输出作为后面的标准输入”
xargs是实现“将前面的标准输入作为命令的参数”
#cat 123.txtabc#find ./ -print | grep 123.txt./123.txt#find ./ -print | xargs grep 123.txt./123.txt:abc
命令解析
Usage: xargs [OPTION]... COMMAND [INITIAL-ARGS]...Run COMMAND with arguments INITIAL-ARGS and more arguments read from input.Mandatory and optional arguments to long options are alsomandatory or optional for the corresponding short option.-0, --null items are separated by a null, not whitespace; disables quote and backslash processing and logical EOF processing -a, --arg-file=FILE read arguments from FILE, not standard input -d, --delimiter=CHARACTER items in input stream are separated by CHARACTER, not by whitespace; disables quote and backslash processing and logical EOF processing -E END set logical EOF string; if END occurs as a line of input, the rest of the input is ignored (ignored if -0 or -d was specified) -e, --eof[=END] equivalent to -E END if END is specified; otherwise, there is no end-of-file string -I R same as --replace=R -i, --replace[=R] replace R in INITIAL-ARGS with names read from standard input; if R is unspecified, assume {} -L, --max-lines=MAX-LINES use at most MAX-LINES non-blank input lines per command line -l[MAX-LINES] similar to -L but defaults to at most one non- blank input line if MAX-LINES is not specified -n, --max-args=MAX-ARGS use at most MAX-ARGS arguments per command line -P, --max-procs=MAX-PROCS run at most MAX-PROCS processes at a time -p, --interactive prompt before running commands --process-slot-var=VAR set environment variable VAR in child processes -r, --no-run-if-empty if there are no arguments, then do not run COMMAND; if this option is not given, COMMAND will be run at least once -s, --max-chars=MAX-CHARS limit length of command line to MAX-CHARS --show-limits show limits on command-line length -t, --verbose print commands before executing them -x, --exit exit if the size (see -s) is exceeded --help display this help and exit --version output version information and exit
实例1: 查找系统中的每一个普通文件,然后使用xargs命令来测试它们分别属于哪类文件
命令:
find . -type f -print | xargs file
输出:
[root@localhost test]# ll
总计 312
-rw-r--r-- 1 root root 302108 11-03 06:19 log2012.log
-rw-r--r-- 1 root root 0 11-12 22:25 log2013.log
-rw-r--r-- 1 root root 0 11-12 22:25 log2014.log
drwxr-xr-x 6 root root 4096 10-27 01:58 scf
drwxrwxrwx 2 root root 4096 11-12 19:32 test3
drwxrwxrwx 2 root root 4096 11-12 19:32 test4
[root@localhost test]# find . -type f -print | xargs file
./log2014.log: empty
./log2013.log: empty
./log2012.log: ASCII text
[root@localhost test]#
实例2:在整个系统中查找内存信息转储文件(core dump) ,然后把结果保存到/tmp/core.log 文件中
命令:
find / -name "core" -print | xargs echo "" >/tmp/core.log
输出:
[root@localhost test]# find / -name "core" -print | xargs echo "" >/tmp/core.log
[root@localhost test]# cd /tmp
[root@localhost tmp]# ll
总计 16
-rw-r--r-- 1 root root 1524 11-12 22:29 core.log
drwx------ 2 root root 4096 11-12 22:24 ssh-TzcZDx1766
drwx------ 2 root root 4096 11-12 22:28 ssh-ykiRPk1815
drwx------ 2 root root 4096 11-03 07:11 vmware-root
实例3:在当前目录下查找所有用户具有读、写和执行权限的文件,并收回相应的写权限
命令:
find . -perm -7 -print | xargs chmod o-w
输出:
[root@localhost test]# ll
总计 312
-rw-r--r-- 1 root root 302108 11-03 06:19 log2012.log
-rw-r--r-- 1 root root 0 11-12 22:25 log2013.log
-rw-r--r-- 1 root root 0 11-12 22:25 log2014.log
drwxr-xr-x 6 root root 4096 10-27 01:58 scf
drwxrwxrwx 2 root root 4096 11-12 19:32 test3
drwxrwxrwx 2 root root 4096 11-12 19:32 test4
[root@localhost test]# find . -perm -7 -print | xargs chmod o-w
[root@localhost test]# ll
总计 312
-rw-r--r-- 1 root root 302108 11-03 06:19 log2012.log
-rw-r--r-- 1 root root 0 11-12 22:25 log2013.log
-rw-r--r-- 1 root root 0 11-12 22:25 log2014.log
drwxr-xr-x 6 root root 4096 10-27 01:58 scf
drwxrwxr-x 2 root root 4096 11-12 19:32 test3
drwxrwxr-x 2 root root 4096 11-12 19:32 test4
[root@localhost test]#
说明:
执行命令后,文件夹scf、test3和test4的权限都发生改变
实例4:用grep命令在所有的普通文件中搜索hostname这个词
命令:
find . -type f -print | xargs grep "hostname"
输出:
[root@localhost test]# find . -type f -print | xargs grep "hostname"
./log2013.log:hostnamebaidu=baidu.com
./log2013.log:hostnamesina=sina.com
./log2013.log:hostnames=true[root@localhost test]#
实例5:用grep命令在当前目录下的所有普通文件中搜索hostnames这个词
命令:
find . -name \* -type f -print | xargs grep "hostnames"
输出:
[root@peida test]# find . -name \* -type f -print | xargs grep "hostnames"
./log2013.log:hostnamesina=sina.com
./log2013.log:hostnames=true[root@localhost test]#
说明:
注意,在上面的例子中, \用来取消find命令中的*在shell中的特殊含义。
实例6:使用xargs执行mv
命令:
find . -name "*.log" | xargs -i mv {} test4
输出:
[root@localhost test]# ll
总计 316
-rw-r--r-- 1 root root 302108 11-03 06:19 log2012.log
-rw-r--r-- 1 root root 61 11-12 22:44 log2013.log
-rw-r--r-- 1 root root 0 11-12 22:25 log2014.log
drwxr-xr-x 6 root root 4096 10-27 01:58 scf
drwxrwxr-x 2 root root 4096 11-12 22:54 test3
drwxrwxr-x 2 root root 4096 11-12 19:32 test4
[root@localhost test]# cd test4/
[root@localhost test4]# ll
总计 0[root@localhost test4]# cd ..
[root@localhost test]# find . -name "*.log" | xargs -i mv {} test4
[root@localhost test]# ll
总计 12drwxr-xr-x 6 root root 4096 10-27 01:58 scf
drwxrwxr-x 2 root root 4096 11-13 05:50 test3
drwxrwxr-x 2 root root 4096 11-13 05:50 test4
[root@localhost test]# cd test4/
[root@localhost test4]# ll
总计 304
-rw-r--r-- 1 root root 302108 11-12 22:54 log2012.log
-rw-r--r-- 1 root root 61 11-12 22:54 log2013.log
-rw-r--r-- 1 root root 0 11-12 22:54 log2014.log
[root@localhost test4]#
实例7:find后执行xargs提示xargs: argument line too long解决方法:
命令:
find . -type f -atime +0 -print0 | xargs -0 -l1 -t rm -f
输出:
[root@pd test4]# find . -type f -atime +0 -print0 | xargs -0 -l1 -t rm -f
rm -f
[root@pdtest4]#
说明:
-l1是一次处理一个;-t是处理之前打印出命令
实例8:使用-i参数默认的前面输出用{}代替,-I参数可以指定其他代替字符,如例子中的[]
命令:
输出:
[root@localhost test]# ll
总计 12drwxr-xr-x 6 root root 4096 10-27 01:58 scf
drwxrwxr-x 2 root root 4096 11-13 05:50 test3
drwxrwxr-x 2 root root 4096 11-13 05:50 test4
[root@localhost test]# cd test4
[root@localhost test4]# find . -name "file" | xargs -I [] cp [] ..
[root@localhost test4]# ll
总计 304
-rw-r--r-- 1 root root 302108 11-12 22:54 log2012.log
-rw-r--r-- 1 root root 61 11-12 22:54 log2013.log
-rw-r--r-- 1 root root 0 11-12 22:54 log2014.log
[root@localhost test4]# cd ..
[root@localhost test]# ll
总计 316
-rw-r--r-- 1 root root 302108 11-13 06:03 log2012.log
-rw-r--r-- 1 root root 61 11-13 06:03 log2013.log
-rw-r--r-- 1 root root 0 11-13 06:03 log2014.log
drwxr-xr-x 6 root root 4096 10-27 01:58 scf
drwxrwxr-x 2 root root 4096 11-13 05:50 test3
drwxrwxr-x 2 root root 4096 11-13 05:50 test4
[root@localhost test]#
说明:
使用-i参数默认的前面输出用{}代替,-I参数可以指定其他代替字符,如例子中的[]
实例9:xargs的-p参数的使用
命令:
find . -name "*.log" | xargs -p -i mv {} ..
输出:
[root@localhost test3]# ll
总计 0
-rw-r--r-- 1 root root 0 11-13 06:06 log2015.log
[root@localhost test3]# cd ..
[root@localhost test]# ll
总计 316
-rw-r--r-- 1 root root 302108 11-13 06:03 log2012.log
-rw-r--r-- 1 root root 61 11-13 06:03 log2013.log
-rw-r--r-- 1 root root 0 11-13 06:03 log2014.log
drwxr-xr-x 6 root root 4096 10-27 01:58 scf
drwxrwxr-x 2 root root 4096 11-13 06:06 test3
drwxrwxr-x 2 root root 4096 11-13 05:50 test4
[root@localhost test]# cd test3
[root@localhost test3]# find . -name "*.log" | xargs -p -i mv {} ..
mv ./log2015.log .. ?...y
[root@localhost test3]# ll
总计 0[root@localhost test3]# cd ..
[root@localhost test]# ll
总计 316
-rw-r--r-- 1 root root 302108 11-13 06:03 log2012.log
-rw-r--r-- 1 root root 61 11-13 06:03 log2013.log
-rw-r--r-- 1 root root 0 11-13 06:03 log2014.log
-rw-r--r-- 1 root root 0 11-13 06:06 log2015.log
drwxr-xr-x 6 root root 4096 10-27 01:58 scf
drwxrwxr-x 2 root root 4096 11-13 06:08 test3
drwxrwxr-x 2 root root 4096 11-13 05:50 test4
[root@localhost test]#
说明:-p参数会提示让你确认是否执行后面的命令,y执行,n不执行。
- xargs命令
- xargs命令
- xargs 命令
- xargs命令
- xargs 命令
- xargs命令
- xargs命令
- xargs 命令
- xargs命令
- xargs 命令
- xargs 命令
- xargs命令
- xargs 命令
- xargs命令
- xargs命令
- xargs命令
- xargs命令
- xargs 命令
- CF806C:Prairie Partition(二分)
- 购买vps服务器
- redis基本命令
- Kotlin初探
- 新闻客户端(AsyncHttpClient和SmartImageView的综合使用)
- xargs命令
- 关于KotLin,在学习的过程中还需要思考的问题
- 51nod1015
- ***汇编语言 实验10.2 解决除法溢出的问题
- Eclipse设置全局JVM参数
- 外键的作用
- 数学分析八讲笔记(三)
- 语句
- 操作符与表达式