为Cubieboard2构建自己的的Debian Linux的步骤（5）（分色排版）建立 ROOTFS
来源：互联网 发布：怎样追加淘宝评价 编辑：程序博客网 时间：2024/05/20 09:22
为Cubieboard2构建自己的的Debian Linux的步骤（5）建立 ROOTFS
soloforce汇编整理
2013年12月28 日
大文实验室/大文哥
壹捌陆捌零陆捌捌陆捌贰
wb4916 AT qq.com
完成时间：2017/6/7 15:42
3 建立 ROOTFS
除非特别说明，本节的所有操作都在 $ROOTFS_DIR 下面进行，所以我们进入该目录先。首先且最重要的是设置管理员密码。
用户名/密码：root/root
（出错了，重新解一下压缩包的步骤：）
root@cm-System-Product-Name:/home/rootroot/cubieboard2# tar zxvf chroot-armhf_cb2_20170607_1121_config.tar.gz
root@cm-System-Product-Name:/home/rootroot/cubieboard2# cd chroot-armhf
（正常步骤：）
root@cm-System-Product-Name:/home/rootroot/cubieboard2/linux-sunxi#
root@cm-System-Product-Name:/home/rootroot/cubieboard2/linux-sunxi# cd ../chroot-armhf
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf# chroot . passwd
Enter new UNIX password:
Retype new UNIX password:
passwd: password updated successfully
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
3.1 重要步骤
Debian的rootfs基础系统已经在前文下载安装，现在要执行进一步配置。
修改主机名称：
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf# cat etc/hostname
cm-System-Product-Name
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf# ll etc/hostname
-rw-r--r-- 1 root root 23 8月 10 2016 etc/hostname
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf# echo "Cubieboard" > etc/hostname
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf# cat etc/hostname
Cubieboard
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf# cat etc/hosts
127.0.0.1 localhost
::1 localhost ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf# echo "127.0.0.1 Cubieboard" >> etc/hosts
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf# cat etc/hosts
127.0.0.1 localhost
::1 localhost ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
（不知道怎么输入TAB键，直接用空格代替了！）
127.0.0.1 Cubieboard
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
内核模块安装，这是最关键步骤：
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf# ll boot/u*
ls: 无法访问boot/u*: 没有那个文件或目录
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf# cp ../linux-sunxi/arch/arm/boot/uImage boot/
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf# ll boot/u*
-rw-r--r-- 1 root root 4635800 6月 7 16:29 boot/uImage
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf# pwd
/home/rootroot/cubieboard2/chroot-armhf
（相对路径）
root@rootroot-E400:/home/rootroot/cubieboard/chroot-armhf# make -C ../linux-sunxi INSTALL_MOD_PATH=. ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- modules_install
（新手请使用绝对路径，和上一条命令同样功能：）
root@rootroot-E400:/home/rootroot/cubieboard/chroot-armhf# make -C /home/rootroot/cubieboard2/linux-sunxi/ INSTALL_MOD_PATH=/home/rootroot/cubieboard2/chroot-armhf ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- modules_install
……
INSTALL sound/usb/snd-usb-audio.ko
INSTALL sound/usb/snd-usbmidi-lib.ko
MKDIR /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/emi26
INSTALL /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/emi26/loader.fw
INSTALL /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/emi26/firmware.fw
INSTALL /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/emi26/bitstream.fw
MKDIR /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/emi62
INSTALL /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/emi62/loader.fw
INSTALL /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/emi62/bitstream.fw
INSTALL /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/emi62/spdif.fw
INSTALL /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/emi62/midi.fw
MKDIR /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/kaweth
INSTALL /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/kaweth/new_code.bin
INSTALL /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/kaweth/trigger_code.bin
INSTALL /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/kaweth/new_code_fix.bin
INSTALL /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/kaweth/trigger_code_fix.bin
INSTALL /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/ti_3410.fw
INSTALL /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/ti_5052.fw
INSTALL /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/mts_cdma.fw
INSTALL /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/mts_gsm.fw
INSTALL /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/mts_edge.fw
MKDIR /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/edgeport
INSTALL /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/edgeport/boot.fw
INSTALL /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/edgeport/boot2.fw
INSTALL /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/edgeport/down.fw
INSTALL /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/edgeport/down2.fw
INSTALL /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/edgeport/down3.bin
INSTALL /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/whiteheat_loader.fw
INSTALL /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/whiteheat.fw
MKDIR /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/keyspan_pda
INSTALL /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/keyspan_pda/keyspan_pda.fw
INSTALL /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/keyspan_pda/xircom_pgs.fw
MKDIR /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/cpia2
INSTALL /home/rootroot/cubieboard2/chroot-armhf/lib/firmware/cpia2/stv0672_vp4.bin
DEPMOD 3.4.61+
make:离开目录“/home/rootroot/cubieboard2/linux-sunxi”
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
设置串口调试终端参数，这也是很重要的哦：
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf# ll etc/inittab
-rw-r--r-- 1 root root 2008 7月 18 2013 etc/inittab
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf# cat etc/inittab
# /etc/inittab: init(8) configuration.
# $Id: inittab,v 1.91 2002/01/25 13:35:21 miquels Exp $
# The default runlevel.
id:2:initdefault:
# Boot-time system configuration/initialization script.
# This is run first except when booting in emergency (-b) mode.
si::sysinit:/etc/init.d/rcS
# What to do in single-user mode.
~~:S:wait:/sbin/sulogin
# /etc/init.d executes the S and K scripts upon change
# of runlevel.
#
# Runlevel 0 is halt.
# Runlevel 1 is single-user.
# Runlevels 2-5 are multi-user.
# Runlevel 6 is reboot.
l0:0:wait:/etc/init.d/rc 0
l1:1:wait:/etc/init.d/rc 1
l2:2:wait:/etc/init.d/rc 2
l3:3:wait:/etc/init.d/rc 3
l4:4:wait:/etc/init.d/rc 4
l5:5:wait:/etc/init.d/rc 5
l6:6:wait:/etc/init.d/rc 6
# Normally not reached, but fallthrough in case of emergency.
z6:6:respawn:/sbin/sulogin
# What to do when CTRL-ALT-DEL is pressed.
ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now
# Action on special keypress (ALT-UpArrow).
#kb::kbrequest:/bin/echo "Keyboard Request--edit /etc/inittab to let this work."
# What to do when the power fails/returns.
pf::powerwait:/etc/init.d/powerfail start
pn::powerfailnow:/etc/init.d/powerfail now
po::powerokwait:/etc/init.d/powerfail stop
# /sbin/getty invocations for the runlevels.
#
# The "id" field MUST be the same as the last
# characters of the device (after "tty").
#
# Format:
# <id>:<runlevels>:<action>:<process>
#
# Note that on most Debian systems tty7 is used by the X Window System,
# so if you want to add more getty's go ahead but skip tty7 if you run X.
#
1:2345:respawn:/sbin/getty 38400 tty1
2:23:respawn:/sbin/getty 38400 tty2
3:23:respawn:/sbin/getty 38400 tty3
4:23:respawn:/sbin/getty 38400 tty4
5:23:respawn:/sbin/getty 38400 tty5
6:23:respawn:/sbin/getty 38400 tty6
# Example how to put a getty on a serial line (for a terminal)
#
#T0:23:respawn:/sbin/getty -L ttyS0 9600 vt100
#T1:23:respawn:/sbin/getty -L ttyS1 9600 vt100
# Example how to put a getty on a modem line.
#
#T3:23:respawn:/sbin/mgetty -x0 -s 57600 ttyS3
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf# echo T0:2345:respawn:/sbin/getty -L ttyS0 115200 vt100 >> etc/inittab
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf# cat etc/inittab
# /etc/inittab: init(8) configuration.
# $Id: inittab,v 1.91 2002/01/25 13:35:21 miquels Exp $
# The default runlevel.
id:2:initdefault:
# Boot-time system configuration/initialization script.
# This is run first except when booting in emergency (-b) mode.
si::sysinit:/etc/init.d/rcS
# What to do in single-user mode.
~~:S:wait:/sbin/sulogin
# /etc/init.d executes the S and K scripts upon change
# of runlevel.
#
# Runlevel 0 is halt.
# Runlevel 1 is single-user.
# Runlevels 2-5 are multi-user.
# Runlevel 6 is reboot.
l0:0:wait:/etc/init.d/rc 0
l1:1:wait:/etc/init.d/rc 1
l2:2:wait:/etc/init.d/rc 2
l3:3:wait:/etc/init.d/rc 3
l4:4:wait:/etc/init.d/rc 4
l5:5:wait:/etc/init.d/rc 5
l6:6:wait:/etc/init.d/rc 6
# Normally not reached, but fallthrough in case of emergency.
z6:6:respawn:/sbin/sulogin
# What to do when CTRL-ALT-DEL is pressed.
ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now
# Action on special keypress (ALT-UpArrow).
#kb::kbrequest:/bin/echo "Keyboard Request--edit /etc/inittab to let this work."
# What to do when the power fails/returns.
pf::powerwait:/etc/init.d/powerfail start
pn::powerfailnow:/etc/init.d/powerfail now
po::powerokwait:/etc/init.d/powerfail stop
# /sbin/getty invocations for the runlevels.
#
# The "id" field MUST be the same as the last
# characters of the device (after "tty").
#
# Format:
# <id>:<runlevels>:<action>:<process>
#
# Note that on most Debian systems tty7 is used by the X Window System,
# so if you want to add more getty's go ahead but skip tty7 if you run X.
#
1:2345:respawn:/sbin/getty 38400 tty1
2:23:respawn:/sbin/getty 38400 tty2
3:23:respawn:/sbin/getty 38400 tty3
4:23:respawn:/sbin/getty 38400 tty4
5:23:respawn:/sbin/getty 38400 tty5
6:23:respawn:/sbin/getty 38400 tty6
# Example how to put a getty on a serial line (for a terminal)
#
#T0:23:respawn:/sbin/getty -L ttyS0 9600 vt100
#T1:23:respawn:/sbin/getty -L ttyS1 9600 vt100
# Example how to put a getty on a modem line.
#
#T3:23:respawn:/sbin/mgetty -x0 -s 57600 ttyS3
T0:2345:respawn:/sbin/getty -L ttyS0 115200 vt100
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
配置并更新软件源：
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf# cat etc/apt/sources.list
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf# ll etc/apt/sources.list
-rw-r--r-- 1 root root 0 6月 7 11:10 etc/apt/sources.list
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf# echo deb http://http.debian.net/debian/ wheezy main contrib non-free > etc/apt/sources.list
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf# echo deb http://security.debian.org/ wheezy/updates main contrib non-free >> etc/apt/sources.list
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf# cat etc/apt/sources.list
deb http://http.debian.net/debian/ wheezy main contrib non-free
deb http://security.debian.org/ wheezy/updates main contrib non-free
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf# chroot . apt-get update
Get:1 http://security.debian.org wheezy/updates Release.gpg [1554 B]
Get:2 http://security.debian.org wheezy/updates Release [39.0 kB]
Get:3 http://security.debian.org wheezy/updates/main armhf Packages [524 kB]
Get:4 http://http.debian.net wheezy Release.gpg [2373 B]
Get:5 http://http.debian.net wheezy Release [191 kB]
Get:6 http://security.debian.org wheezy/updates/contrib armhf Packages [14 B]
Get:7 http://security.debian.org wheezy/updates/non-free armhf Packages [14 B]
Get:8 http://security.debian.org wheezy/updates/contrib Translation-en [14 B]
Get:9 http://security.debian.org wheezy/updates/main Translation-en [294 kB]
Get:10 http://security.debian.org wheezy/updates/non-free Translation-en [14 B]
Get:11 http://http.debian.net wheezy/main armhf Packages [5685 kB]
Get:12 http://http.debian.net wheezy/contrib armhf Packages [33.1 kB]
Get:13 http://http.debian.net wheezy/non-free armhf Packages [55.8 kB]
Get:14 http://http.debian.net wheezy/contrib Translation-en [34.8 kB]
Get:15 http://http.debian.net wheezy/main Translation-en [3846 kB]
Get:16 http://http.debian.net wheezy/non-free Translation-en [66.1 kB]
Fetched 10.8 MB in 1min 35s (112 kB/s)
Reading package lists... Done
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf# chroot . apt-get upgrade
Reading package lists... Done
Building dependency tree... Done
The following packages will be upgraded:
bash gnupg gpgv libc-bin libc6 libcurl3-gnutls libgcrypt11 libidn11 libldap-2.4-2 librtmp0 libsqlite3-0 libssl1.0.0 libtasn1-3 login multiarch-support openssl passwd perl-base tar tzdata vim-common
vim-tiny wget
23 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 18.0 MB of archives.
After this operation, 2450 kB disk space will be freed.
Do you want to continue [Y/n]? y
Get:1 http://security.debian.org/ wheezy/updates/main bash armhf 4.2+dfsg-0.1+deb7u4 [1416 kB]
Get:2 http://security.debian.org/ wheezy/updates/main login armhf 1:4.1.5.1-1+deb7u1 [970 kB]
Get:3 http://security.debian.org/ wheezy/updates/main perl-base armhf 5.14.2-21+deb7u5 [1404 kB]
Get:4 http://security.debian.org/ wheezy/updates/main tar armhf 1.26+dfsg-0.1+deb7u1 [955 kB]
Get:5 http://security.debian.org/ wheezy/updates/main libc-bin armhf 2.13-38+deb7u11 [1169 kB]
Get:6 http://security.debian.org/ wheezy/updates/main libc6 armhf 2.13-38+deb7u11 [3903 kB]
Get:7 http://security.debian.org/ wheezy/updates/main libgcrypt11 armhf 1.5.0-5+deb7u5 [292 kB]
Get:8 http://security.debian.org/ wheezy/updates/main libssl1.0.0 armhf 1.0.1t-1+deb7u2 [1022 kB]
Get:9 http://security.debian.org/ wheezy/updates/main libtasn1-3 armhf 2.13-2+deb7u4 [62.3 kB]
Get:10 http://security.debian.org/ wheezy/updates/main libidn11 armhf 1.25-2+deb7u2 [175 kB]
Get:11 http://security.debian.org/ wheezy/updates/main libldap-2.4-2 armhf 2.4.31-2+deb7u3 [208 kB]
Get:12 http://security.debian.org/ wheezy/updates/main librtmp0 armhf 2.4+20111222.git4e06e21-1+deb7u1 [55.6 kB]
Get:13 http://security.debian.org/ wheezy/updates/main libcurl3-gnutls armhf 7.26.0-1+wheezy19 [295 kB]
Get:14 http://security.debian.org/ wheezy/updates/main libsqlite3-0 armhf 3.7.13-1+deb7u3 [386 kB]
Get:15 http://security.debian.org/ wheezy/updates/main gpgv armhf 1.4.12-7+deb7u8 [196 kB]
Get:16 http://security.debian.org/ wheezy/updates/main gnupg armhf 1.4.12-7+deb7u8 [1867 kB]
Get:17 http://security.debian.org/ wheezy/updates/main passwd armhf 1:4.1.5.1-1+deb7u1 [1105 kB]
Get:18 http://security.debian.org/ wheezy/updates/main tzdata all 2017b-0+deb7u1 [488 kB]
Get:19 http://security.debian.org/ wheezy/updates/main multiarch-support armhf 2.13-38+deb7u11 [152 kB]
Get:20 http://security.debian.org/ wheezy/updates/main vim-tiny armhf 2:7.3.547-7+deb7u3 [290 kB]
Get:21 http://security.debian.org/ wheezy/updates/main vim-common armhf 2:7.3.547-7+deb7u3 [162 kB]
Get:22 http://security.debian.org/ wheezy/updates/main wget armhf 1.13.4-3+deb7u4 [747 kB]
Get:23 http://security.debian.org/ wheezy/updates/main openssl armhf 1.0.1t-1+deb7u2 [693 kB]
Fetched 18.0 MB in 7s (2479 kB/s)
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = "zh_CN:zh",
LC_ALL = (unset),
LANG = "zh_CN.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
/usr/bin/locale: Cannot set LC_CTYPE to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_MESSAGES to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_ALL to default locale: No such file or directory
Preconfiguring packages ...
Can not write log, openpty() failed (/dev/pts not mounted?)
(Reading database ... 9688 files and directories currently installed.)
Preparing to replace bash 4.2+dfsg-0.1+deb7u3 (using .../bash_4.2+dfsg-0.1+deb7u4_armhf.deb) ...
Unpacking replacement bash ...
Processing triggers for man-db ...
/usr/bin/locale: Cannot set LC_CTYPE to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_MESSAGES to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_ALL to default locale: No such file or directory
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up bash (4.2+dfsg-0.1+deb7u4) ...
update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode
Can not write log, openpty() failed (/dev/pts not mounted?)
(Reading database ... 9688 files and directories currently installed.)
Preparing to replace login 1:4.1.5.1-1 (using .../login_1%3a4.1.5.1-1+deb7u1_armhf.deb) ...
Unpacking replacement login ...
Processing triggers for man-db ...
/usr/bin/locale: Cannot set LC_CTYPE to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_MESSAGES to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_ALL to default locale: No such file or directory
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up login (1:4.1.5.1-1+deb7u1) ...
Can not write log, openpty() failed (/dev/pts not mounted?)
(Reading database ... 9688 files and directories currently installed.)
Preparing to replace perl-base 5.14.2-21+deb7u3 (using .../perl-base_5.14.2-21+deb7u5_armhf.deb) ...
Unpacking replacement perl-base ...
Processing triggers for man-db ...
/usr/bin/locale: Cannot set LC_CTYPE to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_MESSAGES to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_ALL to default locale: No such file or directory
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up perl-base (5.14.2-21+deb7u5) ...
Can not write log, openpty() failed (/dev/pts not mounted?)
(Reading database ... 9688 files and directories currently installed.)
Preparing to replace tar 1.26+dfsg-0.1 (using .../tar_1.26+dfsg-0.1+deb7u1_armhf.deb) ...
Unpacking replacement tar ...
Processing triggers for man-db ...
/usr/bin/locale: Cannot set LC_CTYPE to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_MESSAGES to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_ALL to default locale: No such file or directory
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up tar (1.26+dfsg-0.1+deb7u1) ...
Can not write log, openpty() failed (/dev/pts not mounted?)
(Reading database ... 9688 files and directories currently installed.)
Preparing to replace libc-bin 2.13-38+deb7u10 (using .../libc-bin_2.13-38+deb7u11_armhf.deb) ...
Unpacking replacement libc-bin ...
Processing triggers for man-db ...
/usr/bin/locale: Cannot set LC_CTYPE to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_MESSAGES to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_ALL to default locale: No such file or directory
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up libc-bin (2.13-38+deb7u11) ...
Can not write log, openpty() failed (/dev/pts not mounted?)
(Reading database ... 9688 files and directories currently installed.)
Preparing to replace libc6:armhf 2.13-38+deb7u10 (using .../libc6_2.13-38+deb7u11_armhf.deb) ...
Unpacking replacement libc6:armhf ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up libc6:armhf (2.13-38+deb7u11) ...
Can not write log, openpty() failed (/dev/pts not mounted?)
(Reading database ... 9688 files and directories currently installed.)
Preparing to replace libgcrypt11:armhf 1.5.0-5+deb7u4 (using .../libgcrypt11_1.5.0-5+deb7u5_armhf.deb) ...
Unpacking replacement libgcrypt11:armhf ...
Preparing to replace libssl1.0.0:armhf 1.0.1e-2+deb7u20 (using .../libssl1.0.0_1.0.1t-1+deb7u2_armhf.deb) ...
Unpacking replacement libssl1.0.0:armhf ...
Preparing to replace libtasn1-3:armhf 2.13-2+deb7u2 (using .../libtasn1-3_2.13-2+deb7u4_armhf.deb) ...
Unpacking replacement libtasn1-3:armhf ...
Preparing to replace libidn11:armhf 1.25-2 (using .../libidn11_1.25-2+deb7u2_armhf.deb) ...
Unpacking replacement libidn11:armhf ...
Preparing to replace libldap-2.4-2:armhf 2.4.31-2+deb7u2 (using .../libldap-2.4-2_2.4.31-2+deb7u3_armhf.deb) ...
Unpacking replacement libldap-2.4-2:armhf ...
Preparing to replace librtmp0:armhf 2.4+20111222.git4e06e21-1 (using .../librtmp0_2.4+20111222.git4e06e21-1+deb7u1_armhf.deb) ...
Unpacking replacement librtmp0:armhf ...
Preparing to replace libcurl3-gnutls:armhf 7.26.0-1+wheezy13 (using .../libcurl3-gnutls_7.26.0-1+wheezy19_armhf.deb) ...
Unpacking replacement libcurl3-gnutls:armhf ...
Preparing to replace libsqlite3-0:armhf 3.7.13-1+deb7u2 (using .../libsqlite3-0_3.7.13-1+deb7u3_armhf.deb) ...
Unpacking replacement libsqlite3-0:armhf ...
Preparing to replace gpgv 1.4.12-7+deb7u7 (using .../gpgv_1.4.12-7+deb7u8_armhf.deb) ...
Unpacking replacement gpgv ...
Processing triggers for man-db ...
/usr/bin/locale: Cannot set LC_CTYPE to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_MESSAGES to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_ALL to default locale: No such file or directory
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up gpgv (1.4.12-7+deb7u8) ...
Can not write log, openpty() failed (/dev/pts not mounted?)
(Reading database ... 9688 files and directories currently installed.)
Preparing to replace gnupg 1.4.12-7+deb7u7 (using .../gnupg_1.4.12-7+deb7u8_armhf.deb) ...
Unpacking replacement gnupg ...
Processing triggers for install-info ...
Processing triggers for man-db ...
/usr/bin/locale: Cannot set LC_CTYPE to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_MESSAGES to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_ALL to default locale: No such file or directory
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up gnupg (1.4.12-7+deb7u8) ...
Can not write log, openpty() failed (/dev/pts not mounted?)
(Reading database ... 9688 files and directories currently installed.)
Preparing to replace passwd 1:4.1.5.1-1 (using .../passwd_1%3a4.1.5.1-1+deb7u1_armhf.deb) ...
Unpacking replacement passwd ...
Processing triggers for man-db ...
/usr/bin/locale: Cannot set LC_CTYPE to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_MESSAGES to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_ALL to default locale: No such file or directory
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up passwd (1:4.1.5.1-1+deb7u1) ...
Can not write log, openpty() failed (/dev/pts not mounted?)
(Reading database ... 9688 files and directories currently installed.)
Preparing to replace tzdata 2016d-0+deb7u1 (using .../tzdata_2017b-0+deb7u1_all.deb) ...
Unpacking replacement tzdata ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up tzdata (2017b-0+deb7u1) ...
Current default time zone: 'Etc/UTC'
Local time is now: Thu Jun 8 04:59:16 UTC 2017.
Universal Time is now: Thu Jun 8 04:59:16 UTC 2017.
Run 'dpkg-reconfigure tzdata' if you wish to change it.
Can not write log, openpty() failed (/dev/pts not mounted?)
(Reading database ... 9703 files and directories currently installed.)
Preparing to replace multiarch-support 2.13-38+deb7u10 (using .../multiarch-support_2.13-38+deb7u11_armhf.deb) ...
Unpacking replacement multiarch-support ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up multiarch-support (2.13-38+deb7u11) ...
Can not write log, openpty() failed (/dev/pts not mounted?)
(Reading database ... 9703 files and directories currently installed.)
Preparing to replace vim-tiny 2:7.3.547-7 (using .../vim-tiny_2%3a7.3.547-7+deb7u3_armhf.deb) ...
Unpacking replacement vim-tiny ...
Preparing to replace vim-common 2:7.3.547-7 (using .../vim-common_2%3a7.3.547-7+deb7u3_armhf.deb) ...
Unpacking replacement vim-common ...
Preparing to replace wget 1.13.4-3+deb7u2 (using .../wget_1.13.4-3+deb7u4_armhf.deb) ...
Unpacking replacement wget ...
Preparing to replace openssl 1.0.1e-2+deb7u20 (using .../openssl_1.0.1t-1+deb7u2_armhf.deb) ...
Unpacking replacement openssl ...
Processing triggers for man-db ...
/usr/bin/locale: Cannot set LC_CTYPE to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_MESSAGES to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_ALL to default locale: No such file or directory
Processing triggers for install-info ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up libgcrypt11:armhf (1.5.0-5+deb7u5) ...
Setting up libssl1.0.0:armhf (1.0.1t-1+deb7u2) ...
/usr/bin/locale: Cannot set LC_CTYPE to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_MESSAGES to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_ALL to default locale: No such file or directory
Setting up libtasn1-3:armhf (2.13-2+deb7u4) ...
Setting up libidn11:armhf (1.25-2+deb7u2) ...
Setting up libldap-2.4-2:armhf (2.4.31-2+deb7u3) ...
Setting up librtmp0:armhf (2.4+20111222.git4e06e21-1+deb7u1) ...
Setting up libcurl3-gnutls:armhf (7.26.0-1+wheezy19) ...
Setting up libsqlite3-0:armhf (3.7.13-1+deb7u3) ...
Setting up vim-common (2:7.3.547-7+deb7u3) ...
Setting up vim-tiny (2:7.3.547-7+deb7u3) ...
Setting up wget (1.13.4-3+deb7u4) ...
Setting up openssl (1.0.1t-1+deb7u2) ...
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
3.2 可选步骤：
安装OpenSSHServer：
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf# chroot . apt-get install openssh-server
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
libbsd0 libedit2 libwrap0 libx11-6 libx11-data libxau6 libxcb1 libxdmcp6 libxext6 libxmuu1 ncurses-term openssh-blacklist openssh-blacklist-extra openssh-client tcpd xauth
Suggested packages:
ssh-askpass libpam-ssh keychain monkeysphere rssh molly-guard ufw
The following NEW packages will be installed:
libbsd0 libedit2 libwrap0 libx11-6 libx11-data libxau6 libxcb1 libxdmcp6 libxext6 libxmuu1 ncurses-term openssh-blacklist openssh-blacklist-extra openssh-client openssh-server tcpd xauth
0 upgraded, 17 newly installed, 0 to remove and 0 not upgraded.
Need to get 6864 kB of archives.
After this operation, 16.4 MB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://security.debian.org/ wheezy/updates/main libx11-data all 2:1.5.0-1+deb7u4 [189 kB]
Get:2 http://http.debian.net/debian/ wheezy/main libedit2 armhf 2.11-20080614-5 [58.5 kB]
Get:3 http://security.debian.org/ wheezy/updates/main libx11-6 armhf 2:1.5.0-1+deb7u4 [816 kB]
Get:4 http://http.debian.net/debian/ wheezy/main libbsd0 armhf 0.4.2-1 [56.4 kB]
Get:5 http://security.debian.org/ wheezy/updates/main openssh-client armhf 1:6.0p1-4+deb7u6 [900 kB]
Get:6 http://http.debian.net/debian/ wheezy/main libwrap0 armhf 7.6.q-24 [58.4 kB]
Get:7 http://http.debian.net/debian/ wheezy/main libxau6 armhf 1:1.0.7-1 [17.3 kB]
Get:8 http://security.debian.org/ wheezy/updates/main openssh-server armhf 1:6.0p1-4+deb7u6 [300 kB]
Get:9 http://http.debian.net/debian/ wheezy/main libxdmcp6 armhf 1:1.1.1-1 [25.0 kB]
Get:10 http://http.debian.net/debian/ wheezy/main libxcb1 armhf 1.8.1-2+deb7u1 [41.9 kB]
Get:11 http://http.debian.net/debian/ wheezy/main libxext6 armhf 2:1.3.1-2+deb7u1 [47.2 kB]
Get:12 http://http.debian.net/debian/ wheezy/main libxmuu1 armhf 2:1.1.1-1 [22.9 kB]
Get:13 http://http.debian.net/debian/ wheezy/main openssh-blacklist all 0.4.1+nmu1 [1835 kB]
Get:14 http://http.debian.net/debian/ wheezy/main openssh-blacklist-extra all 0.4.1+nmu1 [1835 kB]
Get:15 http://http.debian.net/debian/ wheezy/main ncurses-term all 5.9-10 [602 kB]
Get:16 http://http.debian.net/debian/ wheezy/main tcpd armhf 7.6.q-24 [25.6 kB]
Get:17 http://http.debian.net/debian/ wheezy/main xauth armhf 1:1.0.7-1 [33.8 kB]
Fetched 6864 kB in 1min 23s (82.3 kB/s)
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = "zh_CN:zh",
LC_ALL = (unset),
LANG = "zh_CN.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
/usr/bin/locale: Cannot set LC_CTYPE to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_MESSAGES to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_ALL to default locale: No such file or directory
Preconfiguring packages ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Selecting previously unselected package libbsd0:armhf.
(Reading database ... 9708 files and directories currently installed.)
Unpacking libbsd0:armhf (from .../libbsd0_0.4.2-1_armhf.deb) ...
Selecting previously unselected package libedit2:armhf.
Unpacking libedit2:armhf (from .../libedit2_2.11-20080614-5_armhf.deb) ...
Selecting previously unselected package libwrap0:armhf.
Unpacking libwrap0:armhf (from .../libwrap0_7.6.q-24_armhf.deb) ...
Selecting previously unselected package libxau6:armhf.
Unpacking libxau6:armhf (from .../libxau6_1%3a1.0.7-1_armhf.deb) ...
Selecting previously unselected package libxdmcp6:armhf.
Unpacking libxdmcp6:armhf (from .../libxdmcp6_1%3a1.1.1-1_armhf.deb) ...
Selecting previously unselected package libxcb1:armhf.
Unpacking libxcb1:armhf (from .../libxcb1_1.8.1-2+deb7u1_armhf.deb) ...
Selecting previously unselected package libx11-data.
Unpacking libx11-data (from .../libx11-data_2%3a1.5.0-1+deb7u4_all.deb) ...
Selecting previously unselected package libx11-6:armhf.
Unpacking libx11-6:armhf (from .../libx11-6_2%3a1.5.0-1+deb7u4_armhf.deb) ...
Selecting previously unselected package libxext6:armhf.
Unpacking libxext6:armhf (from .../libxext6_2%3a1.3.1-2+deb7u1_armhf.deb) ...
Selecting previously unselected package libxmuu1:armhf.
Unpacking libxmuu1:armhf (from .../libxmuu1_2%3a1.1.1-1_armhf.deb) ...
Selecting previously unselected package openssh-blacklist.
Unpacking openssh-blacklist (from .../openssh-blacklist_0.4.1+nmu1_all.deb) ...
Selecting previously unselected package openssh-blacklist-extra.
Unpacking openssh-blacklist-extra (from .../openssh-blacklist-extra_0.4.1+nmu1_all.deb) ...
Selecting previously unselected package ncurses-term.
Unpacking ncurses-term (from .../ncurses-term_5.9-10_all.deb) ...
Selecting previously unselected package openssh-client.
Unpacking openssh-client (from .../openssh-client_1%3a6.0p1-4+deb7u6_armhf.deb) ...
Selecting previously unselected package openssh-server.
Unpacking openssh-server (from .../openssh-server_1%3a6.0p1-4+deb7u6_armhf.deb) ...
/usr/bin/locale: Cannot set LC_CTYPE to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_MESSAGES to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_ALL to default locale: No such file or directory
Selecting previously unselected package tcpd.
Unpacking tcpd (from .../tcpd_7.6.q-24_armhf.deb) ...
Selecting previously unselected package xauth.
Unpacking xauth (from .../xauth_1%3a1.0.7-1_armhf.deb) ...
Processing triggers for man-db ...
/usr/bin/locale: Cannot set LC_CTYPE to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_MESSAGES to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_ALL to default locale: No such file or directory
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up libbsd0:armhf (0.4.2-1) ...
Setting up libedit2:armhf (2.11-20080614-5) ...
Setting up libwrap0:armhf (7.6.q-24) ...
Setting up libxau6:armhf (1:1.0.7-1) ...
Setting up libxdmcp6:armhf (1:1.1.1-1) ...
Setting up libxcb1:armhf (1.8.1-2+deb7u1) ...
Setting up libx11-data (2:1.5.0-1+deb7u4) ...
Setting up libx11-6:armhf (2:1.5.0-1+deb7u4) ...
Setting up libxext6:armhf (2:1.3.1-2+deb7u1) ...
Setting up libxmuu1:armhf (2:1.1.1-1) ...
Setting up openssh-blacklist (0.4.1+nmu1) ...
Setting up openssh-blacklist-extra (0.4.1+nmu1) ...
Setting up ncurses-term (5.9-10) ...
Setting up openssh-client (1:6.0p1-4+deb7u6) ...
/usr/bin/locale: Cannot set LC_CTYPE to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_MESSAGES to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_ALL to default locale: No such file or directory
Setting up openssh-server (1:6.0p1-4+deb7u6) ...
/usr/bin/locale: Cannot set LC_CTYPE to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_MESSAGES to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_ALL to default locale: No such file or directory
Creating SSH2 RSA key; this may take some time ...
Creating SSH2 DSA key; this may take some time ...
Creating SSH2 ECDSA key; this may take some time ...
[ ok ] Restarting OpenBSD Secure Shell server: sshd.
Setting up tcpd (7.6.q-24) ...
Setting up xauth (1:1.0.7-1) ...
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
安装locales：
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf# chroot . apt-get install locales
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
locales
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 5711 kB of archives.
After this operation, 15.5 MB of additional disk space will be used.
Get:1 http://security.debian.org/ wheezy/updates/main locales all 2.13-38+deb7u11 [5711 kB]
Fetched 5711 kB in 2s (2352 kB/s)
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = "zh_CN:zh",
LC_ALL = (unset),
LANG = "zh_CN.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
/usr/bin/locale: Cannot set LC_CTYPE to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_MESSAGES to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_ALL to default locale: No such file or directory
Preconfiguring packages ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Selecting previously unselected package locales.
(Reading database ... 12787 files and directories currently installed.)
Unpacking locales (from .../locales_2.13-38+deb7u11_all.deb) ...
Processing triggers for man-db ...
/usr/bin/locale: Cannot set LC_CTYPE to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_MESSAGES to default locale: No such file or directory
/usr/bin/locale: Cannot set LC_ALL to default locale: No such file or directory
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up locales (2.13-38+deb7u11) ...
Generating locales (this might take a while)...
Generation complete.
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf# cat etc/locale.gen
# This file lists locales that you wish to have built. You can find a list
# of valid supported locales at /usr/share/i18n/SUPPORTED, and you can add
# user defined locales to /usr/local/share/i18n/SUPPORTED. If you change
# this file, you need to rerun locale-gen.
# aa_DJ ISO-8859-1
# aa_DJ.UTF-8 UTF-8
# aa_ER UTF-8
# aa_ER@saaho UTF-8
# aa_ET UTF-8
# af_ZA ISO-8859-1
# af_ZA.UTF-8 UTF-8
# am_ET UTF-8
# an_ES ISO-8859-15
# an_ES.UTF-8 UTF-8
# ar_AE ISO-8859-6
# ar_AE.UTF-8 UTF-8
# ar_BH ISO-8859-6
# ar_BH.UTF-8 UTF-8
# ar_DZ ISO-8859-6
# ar_DZ.UTF-8 UTF-8
# ar_EG ISO-8859-6
# ar_EG.UTF-8 UTF-8
# ar_IN UTF-8
# ar_IQ ISO-8859-6
# ar_IQ.UTF-8 UTF-8
# ar_JO ISO-8859-6
# ar_JO.UTF-8 UTF-8
# ar_KW ISO-8859-6
# ar_KW.UTF-8 UTF-8
# ar_LB ISO-8859-6
# ar_LB.UTF-8 UTF-8
# ar_LY ISO-8859-6
# ar_LY.UTF-8 UTF-8
# ar_MA ISO-8859-6
# ar_MA.UTF-8 UTF-8
# ar_OM ISO-8859-6
# ar_OM.UTF-8 UTF-8
# ar_QA ISO-8859-6
# ar_QA.UTF-8 UTF-8
# ar_SA ISO-8859-6
# ar_SA.UTF-8 UTF-8
# ar_SD ISO-8859-6
# ar_SD.UTF-8 UTF-8
# ar_SY ISO-8859-6
# ar_SY.UTF-8 UTF-8
# ar_TN ISO-8859-6
# ar_TN.UTF-8 UTF-8
# ar_YE ISO-8859-6
# ar_YE.UTF-8 UTF-8
# as_IN.UTF-8 UTF-8
# ast_ES ISO-8859-15
# ast_ES.UTF-8 UTF-8
# az_AZ.UTF-8 UTF-8
# be_BY CP1251
# be_BY.UTF-8 UTF-8
# be_BY@latin UTF-8
# bem_ZM UTF-8
# ber_DZ UTF-8
# ber_MA UTF-8
# bg_BG CP1251
# bg_BG.UTF-8 UTF-8
# bn_BD UTF-8
# bn_IN UTF-8
# bo_CN UTF-8
# bo_IN UTF-8
# br_FR ISO-8859-1
# br_FR.UTF-8 UTF-8
# br_FR@euro ISO-8859-15
# bs_BA ISO-8859-2
# bs_BA.UTF-8 UTF-8
# byn_ER UTF-8
# ca_AD ISO-8859-15
# ca_AD.UTF-8 UTF-8
# ca_ES ISO-8859-1
# ca_ES.UTF-8 UTF-8
# ca_ES.UTF-8@valencia UTF-8
# ca_ES@euro ISO-8859-15
# ca_ES@valencia ISO-8859-15
# ca_FR ISO-8859-15
# ca_FR.UTF-8 UTF-8
# ca_IT ISO-8859-15
# ca_IT.UTF-8 UTF-8
# crh_UA UTF-8
# cs_CZ ISO-8859-2
# cs_CZ.UTF-8 UTF-8
# csb_PL UTF-8
# cv_RU UTF-8
# cy_GB ISO-8859-14
# cy_GB.UTF-8 UTF-8
# da_DK ISO-8859-1
# da_DK.UTF-8 UTF-8
# de_AT ISO-8859-1
# de_AT.UTF-8 UTF-8
# de_AT@euro ISO-8859-15
# de_BE ISO-8859-1
# de_BE.UTF-8 UTF-8
# de_BE@euro ISO-8859-15
# de_CH ISO-8859-1
# de_CH.UTF-8 UTF-8
# de_DE ISO-8859-1
# de_DE.UTF-8 UTF-8
# de_DE@euro ISO-8859-15
# de_LI.UTF-8 UTF-8
# de_LU ISO-8859-1
# de_LU.UTF-8 UTF-8
# de_LU@euro ISO-8859-15
# dv_MV UTF-8
# dz_BT UTF-8
# el_CY ISO-8859-7
# el_CY.UTF-8 UTF-8
# el_GR ISO-8859-7
# el_GR.UTF-8 UTF-8
# en_AG UTF-8
# en_AU ISO-8859-1
# en_AU.UTF-8 UTF-8
# en_BW ISO-8859-1
# en_BW.UTF-8 UTF-8
# en_CA ISO-8859-1
# en_CA.UTF-8 UTF-8
# en_DK ISO-8859-1
# en_DK.ISO-8859-15 ISO-8859-15
# en_DK.UTF-8 UTF-8
# en_GB ISO-8859-1
# en_GB.ISO-8859-15 ISO-8859-15
# en_GB.UTF-8 UTF-8
# en_HK ISO-8859-1
# en_HK.UTF-8 UTF-8
# en_IE ISO-8859-1
# en_IE.UTF-8 UTF-8
# en_IE@euro ISO-8859-15
# en_IN UTF-8
# en_NG UTF-8
# en_NZ ISO-8859-1
# en_NZ.UTF-8 UTF-8
# en_PH ISO-8859-1
# en_PH.UTF-8 UTF-8
# en_SG ISO-8859-1
# en_SG.UTF-8 UTF-8
# en_US ISO-8859-1
# en_US.ISO-8859-15 ISO-8859-15
# en_US.UTF-8 UTF-8
# en_ZA ISO-8859-1
# en_ZA.UTF-8 UTF-8
# en_ZM UTF-8
# en_ZW ISO-8859-1
# en_ZW.UTF-8 UTF-8
# eo ISO-8859-3
# eo.UTF-8 UTF-8
# es_AR ISO-8859-1
# es_AR.UTF-8 UTF-8
# es_BO ISO-8859-1
# es_BO.UTF-8 UTF-8
# es_CL ISO-8859-1
# es_CL.UTF-8 UTF-8
# es_CO ISO-8859-1
# es_CO.UTF-8 UTF-8
# es_CR ISO-8859-1
# es_CR.UTF-8 UTF-8
# es_DO ISO-8859-1
# es_DO.UTF-8 UTF-8
# es_EC ISO-8859-1
# es_EC.UTF-8 UTF-8
# es_ES ISO-8859-1
# es_ES.UTF-8 UTF-8
# es_ES@euro ISO-8859-15
# es_GT ISO-8859-1
# es_GT.UTF-8 UTF-8
# es_HN ISO-8859-1
# es_HN.UTF-8 UTF-8
# es_MX ISO-8859-1
# es_MX.UTF-8 UTF-8
# es_NI ISO-8859-1
# es_NI.UTF-8 UTF-8
# es_PA ISO-8859-1
# es_PA.UTF-8 UTF-8
# es_PE ISO-8859-1
# es_PE.UTF-8 UTF-8
# es_PR ISO-8859-1
# es_PR.UTF-8 UTF-8
# es_PY ISO-8859-1
# es_PY.UTF-8 UTF-8
# es_SV ISO-8859-1
# es_SV.UTF-8 UTF-8
# es_US ISO-8859-1
# es_US.UTF-8 UTF-8
# es_UY ISO-8859-1
# es_UY.UTF-8 UTF-8
# es_VE ISO-8859-1
# es_VE.UTF-8 UTF-8
# et_EE ISO-8859-1
# et_EE.ISO-8859-15 ISO-8859-15
# et_EE.UTF-8 UTF-8
# eu_ES ISO-8859-1
# eu_ES.UTF-8 UTF-8
# eu_ES@euro ISO-8859-15
# eu_FR ISO-8859-1
# eu_FR.UTF-8 UTF-8
# eu_FR@euro ISO-8859-15
# fa_IR UTF-8
# ff_SN UTF-8
# fi_FI ISO-8859-1
# fi_FI.UTF-8 UTF-8
# fi_FI@euro ISO-8859-15
# fil_PH UTF-8
# fo_FO ISO-8859-1
# fo_FO.UTF-8 UTF-8
# fr_BE ISO-8859-1
# fr_BE.UTF-8 UTF-8
# fr_BE@euro ISO-8859-15
# fr_CA ISO-8859-1
# fr_CA.UTF-8 UTF-8
# fr_CH ISO-8859-1
# fr_CH.UTF-8 UTF-8
# fr_FR ISO-8859-1
# fr_FR.UTF-8 UTF-8
# fr_FR@euro ISO-8859-15
# fr_LU ISO-8859-1
# fr_LU.UTF-8 UTF-8
# fr_LU@euro ISO-8859-15
# fur_IT UTF-8
# fy_DE UTF-8
# fy_NL UTF-8
# ga_IE ISO-8859-1
# ga_IE.UTF-8 UTF-8
# ga_IE@euro ISO-8859-15
# gd_GB ISO-8859-15
# gd_GB.UTF-8 UTF-8
# gez_ER UTF-8
# gez_ER@abegede UTF-8
# gez_ET UTF-8
# gez_ET@abegede UTF-8
# gl_ES ISO-8859-1
# gl_ES.UTF-8 UTF-8
# gl_ES@euro ISO-8859-15
# gu_IN UTF-8
# gv_GB ISO-8859-1
# gv_GB.UTF-8 UTF-8
# ha_NG UTF-8
# he_IL ISO-8859-8
# he_IL.UTF-8 UTF-8
# hi_IN UTF-8
# hne_IN UTF-8
# hr_HR ISO-8859-2
# hr_HR.UTF-8 UTF-8
# hsb_DE ISO-8859-2
# hsb_DE.UTF-8 UTF-8
# ht_HT UTF-8
# hu_HU ISO-8859-2
# hu_HU.UTF-8 UTF-8
# hy_AM UTF-8
# hy_AM.ARMSCII-8 ARMSCII-8
# ia UTF-8
# id_ID ISO-8859-1
# id_ID.UTF-8 UTF-8
# ig_NG UTF-8
# ik_CA UTF-8
# is_IS ISO-8859-1
# is_IS.UTF-8 UTF-8
# it_CH ISO-8859-1
# it_CH.UTF-8 UTF-8
# it_IT ISO-8859-1
# it_IT.UTF-8 UTF-8
# it_IT@euro ISO-8859-15
# iu_CA UTF-8
# iw_IL ISO-8859-8
# iw_IL.UTF-8 UTF-8
# ja_JP.EUC-JP EUC-JP
# ja_JP.UTF-8 UTF-8
# ka_GE GEORGIAN-PS
# ka_GE.UTF-8 UTF-8
# kk_KZ PT154
# kk_KZ RK1048
# kk_KZ.UTF-8 UTF-8
# kl_GL ISO-8859-1
# kl_GL.UTF-8 UTF-8
# km_KH UTF-8
# kn_IN UTF-8
# ko_KR.EUC-KR EUC-KR
# ko_KR.UTF-8 UTF-8
# kok_IN UTF-8
# ks_IN UTF-8
# ks_IN@devanagari UTF-8
# ku_TR ISO-8859-9
# ku_TR.UTF-8 UTF-8
# kw_GB ISO-8859-1
# kw_GB.UTF-8 UTF-8
# ky_KG UTF-8
# lg_UG ISO-8859-10
# lg_UG.UTF-8 UTF-8
# li_BE UTF-8
# li_NL UTF-8
# lo_LA UTF-8
# lt_LT ISO-8859-13
# lt_LT.UTF-8 UTF-8
# lv_LV ISO-8859-13
# lv_LV.UTF-8 UTF-8
# mai_IN UTF-8
# mg_MG ISO-8859-15
# mg_MG.UTF-8 UTF-8
# mi_NZ ISO-8859-13
# mi_NZ.UTF-8 UTF-8
# mk_MK ISO-8859-5
# mk_MK.UTF-8 UTF-8
# ml_IN UTF-8
# mn_MN UTF-8
# mr_IN UTF-8
# ms_MY ISO-8859-1
# ms_MY.UTF-8 UTF-8
# mt_MT ISO-8859-3
# mt_MT.UTF-8 UTF-8
# my_MM UTF-8
# nan_TW@latin UTF-8
# nb_NO ISO-8859-1
# nb_NO.UTF-8 UTF-8
# nds_DE UTF-8
# nds_NL UTF-8
# ne_NP UTF-8
# nl_AW UTF-8
# nl_BE ISO-8859-1
# nl_BE.UTF-8 UTF-8
# nl_BE@euro ISO-8859-15
# nl_NL ISO-8859-1
# nl_NL.UTF-8 UTF-8
# nl_NL@euro ISO-8859-15
# nn_NO ISO-8859-1
# nn_NO.UTF-8 UTF-8
# nr_ZA UTF-8
# nso_ZA UTF-8
# oc_FR ISO-8859-1
# oc_FR.UTF-8 UTF-8
# om_ET UTF-8
# om_KE ISO-8859-1
# om_KE.UTF-8 UTF-8
# or_IN UTF-8
# os_RU UTF-8
# pa_IN UTF-8
# pa_PK UTF-8
# pap_AN UTF-8
# pl_PL ISO-8859-2
# pl_PL.UTF-8 UTF-8
# ps_AF UTF-8
# pt_BR ISO-8859-1
# pt_BR.UTF-8 UTF-8
# pt_PT ISO-8859-1
# pt_PT.UTF-8 UTF-8
# pt_PT@euro ISO-8859-15
# ro_RO ISO-8859-2
# ro_RO.UTF-8 UTF-8
# ru_RU ISO-8859-5
# ru_RU.CP1251 CP1251
# ru_RU.KOI8-R KOI8-R
# ru_RU.UTF-8 UTF-8
# ru_UA KOI8-U
# ru_UA.UTF-8 UTF-8
# rw_RW UTF-8
# sa_IN UTF-8
# sc_IT UTF-8
# sd_IN UTF-8
# sd_IN@devanagari UTF-8
# se_NO UTF-8
# shs_CA UTF-8
# si_LK UTF-8
# sid_ET UTF-8
# sk_SK ISO-8859-2
# sk_SK.UTF-8 UTF-8
# sl_SI ISO-8859-2
# sl_SI.UTF-8 UTF-8
# so_DJ ISO-8859-1
# so_DJ.UTF-8 UTF-8
# so_ET UTF-8
# so_KE ISO-8859-1
# so_KE.UTF-8 UTF-8
# so_SO ISO-8859-1
# so_SO.UTF-8 UTF-8
# sq_AL ISO-8859-1
# sq_AL.UTF-8 UTF-8
# sq_MK UTF-8
# sr_ME UTF-8
# sr_RS UTF-8
# sr_RS@latin UTF-8
# ss_ZA UTF-8
# st_ZA ISO-8859-1
# st_ZA.UTF-8 UTF-8
# sv_FI ISO-8859-1
# sv_FI.UTF-8 UTF-8
# sv_FI@euro ISO-8859-15
# sv_SE ISO-8859-1
# sv_SE.ISO-8859-15 ISO-8859-15
# sv_SE.UTF-8 UTF-8
# sw_KE UTF-8
# sw_TZ UTF-8
# ta_IN UTF-8
# te_IN UTF-8
# tg_TJ KOI8-T
# tg_TJ.UTF-8 UTF-8
# th_TH TIS-620
# th_TH.UTF-8 UTF-8
# ti_ER UTF-8
# ti_ET UTF-8
# tig_ER UTF-8
# tk_TM UTF-8
# tl_PH ISO-8859-1
# tl_PH.UTF-8 UTF-8
# tn_ZA UTF-8
# tr_CY ISO-8859-9
# tr_CY.UTF-8 UTF-8
# tr_TR ISO-8859-9
# tr_TR.UTF-8 UTF-8
# ts_ZA UTF-8
# tt_RU.UTF-8 UTF-8
# tt_RU.UTF-8@iqtelif UTF-8
# ug_CN UTF-8
# uk_UA KOI8-U
# uk_UA.UTF-8 UTF-8
# ur_PK UTF-8
# uz_UZ ISO-8859-1
# uz_UZ.UTF-8 UTF-8
# uz_UZ@cyrillic UTF-8
# ve_ZA UTF-8
# vi_VN UTF-8
# vi_VN.TCVN TCVN5712-1
# wa_BE ISO-8859-1
# wa_BE.UTF-8 UTF-8
# wa_BE@euro ISO-8859-15
# wo_SN UTF-8
# xh_ZA ISO-8859-1
# xh_ZA.UTF-8 UTF-8
# yi_US CP1255
# yi_US.UTF-8 UTF-8
# yo_NG UTF-8
# zh_CN GB2312
# zh_CN.GB18030 GB18030
# zh_CN.GBK GBK
# zh_CN.UTF-8 UTF-8
# zh_HK BIG5-HKSCS
# zh_HK.UTF-8 UTF-8
# zh_SG GB2312
# zh_SG.GBK GBK
# zh_SG.UTF-8 UTF-8
# zh_TW BIG5
# zh_TW.EUC-TW EUC-TW
# zh_TW.UTF-8 UTF-8
# zu_ZA ISO-8859-1
# zu_ZA.UTF-8 UTF-8
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf# echo "en_US.UTF-8 UTF-8" > etc/locale.gen
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf# echo "zh_CN.UTF-8 UTF-8" >> etc/locale.gen
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf# chroot . locale-gen
Generating locales (this might take a while)...
en_US.UTF-8... done
zh_CN.UTF-8... done
Generation complete.
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf# cat etc/locale.gen
en_US.UTF-8 UTF-8
zh_CN.UTF-8 UTF-8
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
（可选操作：）
您还可以依样安装其他软件，比如 wifi tools、wpasupplicant、USB 无线网卡的固件（本人用的是巴法络（BUFFALO）WLI-UC-GNMNANO 迷你无线网卡，一款mini 型支持软AP 的USB 无线网卡）
不过我一般用常见的RTL8188EU/RTL8192CU，就不知道怎么配置了？？？？谁知道的说一声！
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf# chroot . apt-get install wireless-tools wpasupplicant firmware-ralink
正在读取软件包列表... 完成
正在分析软件包的依赖关系树
正在读取状态信息... 完成
将会安装下列额外的软件包：
dbus libcap2 libdbus-1-3 libexpat1 libiw30 libnl-3-200 libnl-genl-3-200 libpcsclite1 libreadline5 libsystemd-login0
建议安装的软件包：
dbus-x11 initramfs-tools linux-image pcscd wpagui libengine-pkcs11-openssl
下列【新】软件包将被安装：
dbus firmware-ralink libcap2 libdbus-1-3 libexpat1 libiw30 libnl-3-200 libnl-genl-3-200 libpcsclite1 libreadline5 libsystemd-login0 wireless-tools wpasupplicant
升级了 0 个软件包，新安装了 13 个软件包，要卸载 0 个软件包，有 0 个软件包未被升级。
需要下载 1,576 kB 的软件包。
解压缩后会消耗掉 3,002 kB 的额外空间。
您希望继续执行吗？[Y/n]y
获取：1 http://security.debian.org/ wheezy/updates/main libexpat1 armhf 2.1.0-1+deb7u4 [110 kB]
获取：2 http://security.debian.org/ wheezy/updates/main libnl-3-200 armhf 3.2.7-4+deb7u1 [49.0 kB]
获取：3 http://security.debian.org/ wheezy/updates/main libnl-genl-3-200 armhf 3.2.7-4+deb7u1 [18.1 kB]
获取：4 http://security.debian.org/ wheezy/updates/main libpcsclite1 armhf 1.8.4-1+deb7u2 [52.4 kB]
获取：5 http://security.debian.org/ wheezy/updates/main libsystemd-login0 armhf 44-11+deb7u5 [27.6 kB]
获取：6 http://security.debian.org/ wheezy/updates/main wpasupplicant armhf 1.0-3+deb7u4 [522 kB]
获取：7 http://http.debian.net/debian/ wheezy/main libiw30 armhf 30~pre9-8 [33.4 kB]
获取：8 http://http.debian.net/debian/ wheezy/main libcap2 armhf 1:2.22-1.2 [12.0 kB]
获取：9 http://http.debian.net/debian/ wheezy/main libdbus-1-3 armhf 1.6.8-1+deb7u6 [145 kB]
获取：10 http://http.debian.net/debian/ wheezy/main libreadline5 armhf 5.2+dfsg-2~deb7u1 [124 kB]
获取：11 http://http.debian.net/debian/ wheezy/main dbus armhf 1.6.8-1+deb7u6 [331 kB]
获取：12 http://http.debian.net/debian/ wheezy/non-free firmware-ralink all 0.36+wheezy.1 [21.4 kB]
获取：13 http://http.debian.net/debian/ wheezy/main wireless-tools armhf 30~pre9-8 [130 kB]
下载 1,576 kB，耗时 5秒 (301 kB/s)
无法写入日志。 openpty() 失败(没有挂载 /dev/pts ？)
Selecting previously unselected package libcap2:armhf.
(正在读取数据库 ... 系统当前共安装有 13365 个文件和目录。)
正在解压缩 libcap2:armhf (从 .../libcap2_1%3a2.22-1.2_armhf.deb) ...
Selecting previously unselected package libdbus-1-3:armhf.
正在解压缩 libdbus-1-3:armhf (从 .../libdbus-1-3_1.6.8-1+deb7u6_armhf.deb) ...
Selecting previously unselected package libexpat1:armhf.
正在解压缩 libexpat1:armhf (从 .../libexpat1_2.1.0-1+deb7u4_armhf.deb) ...
Selecting previously unselected package libiw30:armhf.
正在解压缩 libiw30:armhf (从 .../libiw30_30~pre9-8_armhf.deb) ...
Selecting previously unselected package libnl-3-200:armhf.
正在解压缩 libnl-3-200:armhf (从 .../libnl-3-200_3.2.7-4+deb7u1_armhf.deb) ...
Selecting previously unselected package libnl-genl-3-200:armhf.
正在解压缩 libnl-genl-3-200:armhf (从 .../libnl-genl-3-200_3.2.7-4+deb7u1_armhf.deb) ...
Selecting previously unselected package libpcsclite1:armhf.
正在解压缩 libpcsclite1:armhf (从 .../libpcsclite1_1.8.4-1+deb7u2_armhf.deb) ...
Selecting previously unselected package libreadline5:armhf.
正在解压缩 libreadline5:armhf (从 .../libreadline5_5.2+dfsg-2~deb7u1_armhf.deb) ...
Selecting previously unselected package libsystemd-login0:armhf.
正在解压缩 libsystemd-login0:armhf (从 .../libsystemd-login0_44-11+deb7u5_armhf.deb) ...
Selecting previously unselected package dbus.
正在解压缩 dbus (从 .../dbus_1.6.8-1+deb7u6_armhf.deb) ...
Selecting previously unselected package firmware-ralink.
正在解压缩 firmware-ralink (从 .../firmware-ralink_0.36+wheezy.1_all.deb) ...
Selecting previously unselected package wireless-tools.
正在解压缩 wireless-tools (从 .../wireless-tools_30~pre9-8_armhf.deb) ...
Selecting previously unselected package wpasupplicant.
正在解压缩 wpasupplicant (从 .../wpasupplicant_1.0-3+deb7u4_armhf.deb) ...
正在处理用于 man-db 的触发器...
无法写入日志。 openpty() 失败(没有挂载 /dev/pts ？)
正在设置 libcap2:armhf (1:2.22-1.2) ...
正在设置 libdbus-1-3:armhf (1.6.8-1+deb7u6) ...
正在设置 libexpat1:armhf (2.1.0-1+deb7u4) ...
正在设置 libiw30:armhf (30~pre9-8) ...
正在设置 libnl-3-200:armhf (3.2.7-4+deb7u1) ...
正在设置 libnl-genl-3-200:armhf (3.2.7-4+deb7u1) ...
正在设置 libpcsclite1:armhf (1.8.4-1+deb7u2) ...
正在设置 libreadline5:armhf (5.2+dfsg-2~deb7u1) ...
正在设置 libsystemd-login0:armhf (44-11+deb7u5) ...
正在设置 dbus (1.6.8-1+deb7u6) ...
[FAIL] Can't start system message bus - /proc is not mounted ... failed!
正在设置 firmware-ralink (0.36+wheezy.1) ...
正在设置 wireless-tools (30~pre9-8) ...
正在设置 wpasupplicant (1.0-3+deb7u4) ...
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
root@cm-System-Product-Name:/home/rootroot/cubieboard2/chroot-armhf#
- 为Cubieboard2构建自己的的Debian Linux的步骤（5）（分色排版）建立 ROOTFS
- 为Cubieboard2构建自己的的Debian Linux的步骤（3）（分色排版）下载并配置debian系统
- 为Cubieboard2构建自己的的Debian Linux的步骤（1）（分色排版）安装必要的软件
- 为Cubieboard2构建自己的的Debian Linux的步骤（4）（分色排版）编译组件
- 为Cubieboard2构建自己的的Debian Linux的步骤（2）（分色排版）下载cb2的内核==
- 全志R8的SDK的编译步骤V1.0（android4.2.2）（分色排版）
- 原始编译全志R16的androidM的步骤（分色排版）
- 原始编译全志R16的androidM的步骤（分色排版）V1.1
- 全志R16平台的tinav2.1系统关闭adb_shell的步骤（分色排版）
- 全志R16平台调通RTL8189ES的步骤v1.1（分色排版）android4.4.2
- 02使用常规步骤编译NanoPiM1Plus的Android4.4.2（分色排版）V1.0
- 01按照官方步骤编译NanoPiM1Plus的Android（分色排版）V1.0
- 若格的全志R8开发板配置为rtl8188eusV1.0（分色排版）
- 修改AP6212A0所使用的配置文件nvram_ap6210.txt为nvram_ap6212.txt（分色排版）V1.2
- marsboard-a20-ubuntu的配置V1.0（分色排版）
- 调通sina33m下的GC0308（分色排版）V1.0
- 调通sina33m下的OV5640（分色排版）
- ubuntu下查看服务器的CPU详细情况（分色排版）
- nginx配置
- 框架搭建常见问题
- Android酷炫实用的开源框架（UI框架）
- Java还要再学一遍基础（十二）小数运算，BigDecimal，四舍五入
- SpringMVC MultipartFile file文件上传及参数接收
- 为Cubieboard2构建自己的的Debian Linux的步骤（5）（分色排版）建立 ROOTFS
- JQUERY提示Cannot read property 'length' of undefined
- matplotlib.text.Text
- js导出页面表格数据到Excel
- Fragment中ViewaPager嵌套Fragment，内部Fragment无法显示
- mysql服务安装失败
- Div在设置了浮动的情况下水平居中
- Oracle 11g 导出空表
- 欢迎使用CSDN-markdown编辑器
