HP-EVA4400安装

 2.安装HP存储的问题
连接过程,通过带内管理,并把PC服务器的fc口和磁盘阵列通过光纤交换机连接起来,
在pc服务器上安装管理软件,
插入光碟 StorageWorks EVA SmartStart CD
安装过程如下: 可参照安装说明来做( HP_StorageWorks_EVA_4400_Installation_Video_WBT.EXE)
( 如下是安装EVA SmartStart的步骤)
Insert the StorageWorks EVA SmartStart CD into the host server’s CD-ROM or DVD-ROM drive.
The CD should autoplay and show the Welcome screen and End User License Agreement (EULA).  
Note: If the “Required Software Missing” dialog box appears, follow the prompts to install the necessary supporting software and restart the server.

After the server restarts, return to step 1 and re-insert the CD.

Accept the EULA to continue.  
On the Welcome to HP EVA SmartStart screen, select Start Now
Select Configure as management server on the Select a Configuration Option screen.
Review the configuration steps on the Configure Management Server Overview screen.   
Follow the prompts on the next several screens to check server LAN connections, and check and install any necessary  drivers for the FC connections and HBAs.
On the HP Command View EVA Check screen, click Next to begin installation of the Command View EVA software.
Follow the prompts on the next several screens to install Command View EVA and ensure the Results screen displays  Installation was successful in the information box. 
IMPORTANT! On the following screen, make a note of the Windows security group (HP Storage Admins) and Administrator account (hpadmin) to be created.
Continue to the HP Command View EVA Security Setup screen, review the text, and enter the password you wish to use with Command View.
Ensure the security setup was successful.  
If prompted, enter your Command View EVA password on the final HP Command View EVA Check screen and continue through the License Information screen.
The HP EVA Storage Systems Initialization Check screen allows you to choose from two initialization options:  
The setup wizard automatically initializes your storage system and creates the disk groups,
OR
You want to initialize your system and create disk groups manually using Command View EVA.
IMPORTANT! If you need to control how disk groups are created on a storage system, do not use the wizard for initialization. Instead, use HP Command View EVA.
To initialize storage using the wizard, click Next and follow the prompts and instructions on the next several screens.
Ensure successful initialization on the Storage Systems Initialization Check Results page. 

Review the Summary and Next Step Options on the Configure Management Server Summary page.    
安装成功后,可以用这个软件来管理存储了.
对存储划分vdisk来指派到机器之前,要激活存储的license.
从随机带来的信封上找到HP存储的 ordercode,在hp官方网站(https://webware.hp.com/)上申请license,申请时要输入存储的HBA卡的WWN号码.要求把license发到制定的邮箱中

把license拷贝下来,复制如下图的licensing 里的选项中

   
EVA 4400了.
 注: 提交了有效license,才可以创建vdisk

  现在我们需要指定Virtual Disk folder,
In the Navigation pane, expand the tree for the selected storage system and select Virtual Disks. 
In the Virtual Disks Folder Properties screen click Create Folder.
In the Create a Folder screen enter a folder name and any comments, and click Finish.
建立virtual disk
In the Navigation pane select the virtual disk folder you just created.
Select Create Vdisk on the Vdisk Folder Properties screen.
Note: The only entry actually required on the Create a Vdisk screen is the virtual disk size. The defaults can be accepted for all other attributes.
In the Create a Vdisk screen, do the following:  
Enter the virtual disk name.
Specify the desired virtual disk size in gigabytes (GB).
Ensure the Default disk group is selected in the Disk Group dropdown box.
Select the desired virtual disk redundancy level.
Accept the defaults in the Advanced Settings section.
Enter Comments if necessary.
Click Create Vdisk to create the virtual disk.
Create additional virtual disks as desired in the folder.
In the Navigation pane select the virtual disk you just created.
Review the Vdisk Properties screen for accuracy.
建立host folder
In the Navigation pane, expand the tree for the selected storage system and select Hosts.
Click Create Folder in the Host Folder Properties screen.  
In the Create a Folder screen enter the desired folder name and optional comments, and click Finish
添加host
Before you begin: Gather the following information about the host you wish to add:
The host’s LAN name
The WorldWide Name of at least on of the host’s FCA ports
The host’s operating system
The host’s IP address (this parameter is optional)
In the Navigation pane select the host folder you just created.
Click Add Host in the Host Folder Properties screen.  
In the Add a Host screen, enter the host name and other parameters gathered previously, and click Add Host.  
Verify that the host has been added. 
给host添加对应的hba卡号
On the Host Properties screen select the Ports tab, then select Add port.
Select a WorldWide Name from the dropdown list on the Add a Host Port screen, then click Add port.  
Verify that your host is added in the Host Properties screen.
把virtualdisk指派给 host
In the Navigation pane, select the virtual disk you want to present.
Click the Presentation tab on the Vdisk Properties screen, enter the Preferred path/mode from the dropdown box if desired, then click Present.
In the tree control displayed, select the host and click Present Vdisk.
Verify your presentation by clicking the Presentation tab on the Vdisk Properties screen.

搞定收工