Re-install Flyme or Native Google Android on Meizu MX4 Ubuntu (by quqi99)

作者：张华 发表于：2017-06-23

版权声明：可以任意转载，转载时请务必以超链接形式标明文章原始出处和作者信息及本版权声明
( http://blog.csdn.net/quqi99 ) ##

I have two Meizu MX4 ubuntu cellphones, now I will re-install Flyme or native google android on them. All softwares can be downloaded from the link: https://pan.baidu.com/s/1bpo0xbx

1, Start MX4 Ubuntu, and enable ‘Developer Mode’ from ‘System Setting -> About Cellphone’ menu.

2, Install the tools adb and fastboot from the link http://esausilva.com/wp-content/plugins/cimy-counter/cc_redirect.php?cc=platform-tools-linux&fn=http://esausilva.com/misc/android/platform-tools-linux.tar.gz

export PATH=/bak/java/platform-tools:$PATH

3, Make sure your cellphone can connect to compute (Ubuntu) via USB and adb

$ sudo lsusb |grep Meizu  Bus 003 Device 010: ID 2a45:0c02 Meizu Corp. MX Phone (MTP & ADB)$ cat /etc/udev/rules.d/51-android.rules  SUBSYSTEM=="usb", ATTR{idVendor}=="2a45", MODE="0666", SYMLINK+="android_adb"$ cat ~/.android/adb_usb.ini  2a45$ sudo udevadm control --reload-rules && sudo udevadm trigger$ adb kill-server && adb start-server$ adb devices  List of devices attached   75HABLMCYUR3  device$ sudo apt-get install mtpfs mtp-tools gmtp$ sudo mtp-detect  libmtp version: 1.1.10  Listing raw device(s)  Device 0 (VID=2a45 and PID=0c02) is a Meizu MX Phone (MTP+ADB).  Found 1 device(s):  Meizu: MX Phone (MTP+ADB) (2a45:0c02) @ bus 3, dev 10

4, Brush the thirty party recovery. Shutdown your cellphone, and press POWER + VOL-DOWN to enter fastboot mode. Use usb to connect cellphone and compute, than run:

hua@node1:/bak/tools/mx4 $ fastboot flash recovery recovery.imgsending 'recovery' (10000 KB)...OKAY [  0.506s]writing 'recovery'...OKAY [  0.410s]finished. total time: 0.916s

5, Press POWER + VOL-UP to enter above recoerty, and Click ‘Install Zip -> Install zip from sideload’, then run:

hua@node1:/bak/java/platform-tools$ adb sideload update.zipsending: 'sideload'  100%

NOTE: if you want to install raw google android, just run ‘adb sideload cm-13.0-20160820-UNOFFICIAL-mx4.zip’ instead.

6, Reboot the cellphone. OK.