单片机时钟程序(4)ds1302.c
来源:互联网 发布:国美水粉知乎 编辑:程序博客网 时间:2024/05/01 00:54
#include "ds1302.h"
/* 发送一个字节到DS1302通信总线上 */
void DS1302ByteWrite(unsigned char dat)
{
unsigned char mask;
for (mask=0x01; mask!=0; mask<<=1) //低位在前,逐位移出
{
if ((mask&dat) != 0) //首先输出该位数据
DS1302_IO = 1;
else
DS1302_IO = 0;
DS1302_CK = 1; //然后拉高时钟
DS1302_CK = 0; //再拉低时钟,完成一个位的操作
}
DS1302_IO = 1; //最后确保释放IO引脚
}
/* 由DS1302通信总线上读取一个字节 */
unsigned char DS1302ByteRead()
{
unsigned char mask;
unsigned char dat = 0;
for (mask=0x01; mask!=0; mask<<=1) //低位在前,逐位读取
{
if (DS1302_IO != 0) //首先读取此时的IO引脚,并设置dat中的对应位
{
dat |= mask;
}
DS1302_CK = 1; //然后拉高时钟
DS1302_CK = 0; //再拉低时钟,完成一个位的操作
}
return dat; //最后返回读到的字节数据
}
/* 用单次写操作向某一寄存器写入一个字节,reg-寄存器地址,dat-待写入字节 */
void DS1302SingleWrite(unsigned char reg, unsigned char dat)
{
DS1302_CE = 1; //使能片选信号
DS1302ByteWrite((reg<<1)|0x80); //发送写寄存器指令
DS1302ByteWrite(dat); //写入字节数据
DS1302_CE = 0; //除能片选信号
}
/* 用单次读操作从某一寄存器读取一个字节,reg-寄存器地址,返回值-读到的字节 */
unsigned char DS1302SingleRead(unsigned char reg)
{
unsigned char dat;
DS1302_CE = 1; //使能片选信号
DS1302ByteWrite((reg<<1)|0x81); //发送读寄存器指令
dat = DS1302ByteRead(); //读取字节数据
DS1302_CE = 0; //除能片选信号
return dat;
}
/* 用突发模式连续写入8个寄存器数据,dat-待写入数据指针 */
void DS1302BurstWrite(unsigned char *dat)
{
unsigned char i;
DS1302_CE = 1;
DS1302ByteWrite(0xBE); //发送突发写寄存器指令
for (i=0; i<8; i++) //连续写入8字节数据
{
DS1302ByteWrite(dat[i]);
}
DS1302_CE = 0;
}
/* 用突发模式连续读取8个寄存器的数据,dat-读取数据的接收指针 */
void DS1302BurstRead(unsigned char *dat)
{
unsigned char i;
DS1302_CE = 1;
DS1302ByteWrite(0xBF); //发送突发读寄存器指令
for (i=0; i<8; i++) //连续读取8个字节
{
dat[i] = DS1302ByteRead();
}
DS1302_CE = 0;
}
/* 获取实时时间,即读取DS1302当前时间并转换为时间结构体格式 */
void GetRealTime(struct sTime *time)
{
unsigned char buf[8];
DS1302BurstRead(buf);
time->year = buf[6] + 0x2000;
time->mon = buf[4];
time->day = buf[3];
time->hour = buf[2];
time->min = buf[1];
time->sec = buf[0];
time->week = buf[5];
}
/* 设定实时时间,时间结构体格式的设定时间转换为数组并写入DS1302 */
void SetRealTime(struct sTime *time)
{
unsigned char buf[8];
buf[7] = 0;
buf[6] = time->year;
buf[5] = time->week;
buf[4] = time->mon;
buf[3] = time->day;
buf[2] = time->hour;
buf[1] = time->min;
buf[0] = time->sec;
DS1302BurstWrite(buf);
}
/* DS1302初始化,如发生掉电则重新设置初始时间 */
void InitDS1302(void)
{
unsigned char dat;
struct sTime code InitTime[] = { //2013年10月8日 12:30:00 星期二
0x2013,0x10,0x08, 0x12,0x30,0x00, 0x02
};
DS1302_CE = 0; //初始化DS1302通信引脚
DS1302_CK = 0;
dat = DS1302SingleRead(0); //读取秒寄存器
if ((dat & 0x80) != 0) //由秒寄存器最高位CH的值判断DS1302是否已停止
{
DS1302SingleWrite(7, 0x00); //撤销写保护以允许写入数据
SetRealTime(&InitTime); //设置DS1302为默认的初始时间
}
}
/* 发送一个字节到DS1302通信总线上 */
void DS1302ByteWrite(unsigned char dat)
{
unsigned char mask;
for (mask=0x01; mask!=0; mask<<=1) //低位在前,逐位移出
{
if ((mask&dat) != 0) //首先输出该位数据
DS1302_IO = 1;
else
DS1302_IO = 0;
DS1302_CK = 1; //然后拉高时钟
DS1302_CK = 0; //再拉低时钟,完成一个位的操作
}
DS1302_IO = 1; //最后确保释放IO引脚
}
/* 由DS1302通信总线上读取一个字节 */
unsigned char DS1302ByteRead()
{
unsigned char mask;
unsigned char dat = 0;
for (mask=0x01; mask!=0; mask<<=1) //低位在前,逐位读取
{
if (DS1302_IO != 0) //首先读取此时的IO引脚,并设置dat中的对应位
{
dat |= mask;
}
DS1302_CK = 1; //然后拉高时钟
DS1302_CK = 0; //再拉低时钟,完成一个位的操作
}
return dat; //最后返回读到的字节数据
}
/* 用单次写操作向某一寄存器写入一个字节,reg-寄存器地址,dat-待写入字节 */
void DS1302SingleWrite(unsigned char reg, unsigned char dat)
{
DS1302_CE = 1; //使能片选信号
DS1302ByteWrite((reg<<1)|0x80); //发送写寄存器指令
DS1302ByteWrite(dat); //写入字节数据
DS1302_CE = 0; //除能片选信号
}
/* 用单次读操作从某一寄存器读取一个字节,reg-寄存器地址,返回值-读到的字节 */
unsigned char DS1302SingleRead(unsigned char reg)
{
unsigned char dat;
DS1302_CE = 1; //使能片选信号
DS1302ByteWrite((reg<<1)|0x81); //发送读寄存器指令
dat = DS1302ByteRead(); //读取字节数据
DS1302_CE = 0; //除能片选信号
return dat;
}
/* 用突发模式连续写入8个寄存器数据,dat-待写入数据指针 */
void DS1302BurstWrite(unsigned char *dat)
{
unsigned char i;
DS1302_CE = 1;
DS1302ByteWrite(0xBE); //发送突发写寄存器指令
for (i=0; i<8; i++) //连续写入8字节数据
{
DS1302ByteWrite(dat[i]);
}
DS1302_CE = 0;
}
/* 用突发模式连续读取8个寄存器的数据,dat-读取数据的接收指针 */
void DS1302BurstRead(unsigned char *dat)
{
unsigned char i;
DS1302_CE = 1;
DS1302ByteWrite(0xBF); //发送突发读寄存器指令
for (i=0; i<8; i++) //连续读取8个字节
{
dat[i] = DS1302ByteRead();
}
DS1302_CE = 0;
}
/* 获取实时时间,即读取DS1302当前时间并转换为时间结构体格式 */
void GetRealTime(struct sTime *time)
{
unsigned char buf[8];
DS1302BurstRead(buf);
time->year = buf[6] + 0x2000;
time->mon = buf[4];
time->day = buf[3];
time->hour = buf[2];
time->min = buf[1];
time->sec = buf[0];
time->week = buf[5];
}
/* 设定实时时间,时间结构体格式的设定时间转换为数组并写入DS1302 */
void SetRealTime(struct sTime *time)
{
unsigned char buf[8];
buf[7] = 0;
buf[6] = time->year;
buf[5] = time->week;
buf[4] = time->mon;
buf[3] = time->day;
buf[2] = time->hour;
buf[1] = time->min;
buf[0] = time->sec;
DS1302BurstWrite(buf);
}
/* DS1302初始化,如发生掉电则重新设置初始时间 */
void InitDS1302(void)
{
unsigned char dat;
struct sTime code InitTime[] = { //2013年10月8日 12:30:00 星期二
0x2013,0x10,0x08, 0x12,0x30,0x00, 0x02
};
DS1302_CE = 0; //初始化DS1302通信引脚
DS1302_CK = 0;
dat = DS1302SingleRead(0); //读取秒寄存器
if ((dat & 0x80) != 0) //由秒寄存器最高位CH的值判断DS1302是否已停止
{
DS1302SingleWrite(7, 0x00); //撤销写保护以允许写入数据
SetRealTime(&InitTime); //设置DS1302为默认的初始时间
}
}
阅读全文
0 0
- 单片机时钟程序(4)ds1302.c
- 单片机时钟程序(4)ds1302.c
- 单片机时钟程序(5)ds1302.h
- 单片机时钟程序(5)ds1302.h
- ds1302时钟C程序
- 51单片机(AT89C52)DS1302时钟芯片程序
- AVR单片机(ATMEGA16)DS1302时钟芯片程序
- 51单片机DS1302时钟芯片简单程序
- 单片机复习程序例举005 -- DS1302时钟芯片
- 基于DS1302芯片---使用51单片机C语言编制的电子时钟(液晶1602显示)
- LCD1602-DS1302时钟程序
- 单片机时钟程序(1)main.c
- 单片机时钟程序(2)control.c
- 单片机时钟程序(1)main.c
- 单片机时钟程序(6)key.c
- 单片机时钟程序(2)control.c
- 单片机时钟程序(8)lcd1602.c
- 单片机时钟程序(6)key.c
- lvs之 lvs+nginx+tomcat_1、tomcat_2+redis(lvs dr 模式)
- equals和hashCode方法详解
- 倒计时的简单实现
- five
- XML与HTML
- 单片机时钟程序(4)ds1302.c
- trie树的了解
- 出现无法解析的外部符号,可能的原因
- 【Tiny4412--2】Uboot移植
- 使用Python进行编码转换
- ES6新特性之let命令--读书笔记
- Unity消息事件的封装(转)
- Leaflet GridLayer简介
- C#使用socket实现FTP、POP3、SMTP的客户端 (三)