j-link出现CPU could not be halted;no sw-dp found;Too many errors to display
来源:互联网 发布:心事谁人知闽南语翻译 编辑:程序博客网 时间:2024/06/09 01:45
今天下载程序时遇到如下问题:
***JLink Error: CPU is not halted
**JLink Warning: CPU could not be halted
***JLink Error: Can not read register 15 (R15) while CPU is running
***JLink Error: Can not read register 16 (XPSR) while CPU is running
***JLink Error: Can not read register 0 (R0) while CPU is running
***JLink Error: Can not read register 1 (R1) while CPU is running
解决:换下载线。
又遇到第二个问题:
Contents mismatch at: 08000000H (Flash=FFH Required=00H) !
Contents mismatch at: 08000000H (Flash=FFH Required=00H) !
Contents mismatch at: 08000001H (Flash=FFH Required=04H) !
Contents mismatch at: 08000002H (Flash=FFH Required=00H) !
Contents mismatch at: 08000003H (Flash=FFH Required=20H) !
Contents mismatch at: 08000004H (Flash=FFH Required=43H) !
.
.
.
.
.
.
Too many errors to display !
这是在程序下载完进行程序校验的时候出现的,当然把程序校验功能关了,就不会提示这个问题了:
但是程序没法运行起来。
于是我把下载速度降低到20KHz解决。
也有人说,如果你下载程序的时候突然掉电,会导致flash异常出现这个问题。需要选择把flash全片擦除。
- j-link出现CPU could not be halted;no sw-dp found;Too many errors to display
- JLink Warning: CPU could not be halted
- FL2440使用J-Link烧写Nand> Flash遇到CPU is not halted!
- Device could not be initialized or no devices found
- cmake配置出现No CMAKE_CXX_COMPILER could be found问题解决
- IIS出现The specified module could not be found解决方法
- IIS出现The specified module could not be found解决方法
- No CMAKE_C_COMPILER could be found.
- Eclipse 报 "The builder launch configuration could not be found" ,Errors running builder "Integrated
- STM32用j-link下载程序出现NO Cortex-M Device found in JTAG chain问题
- 真机调试出现的bug:Too many errors emitted
- iOS 出现too many errors emitted, stopping now解决办法
- Ubuntu 10.04下J-Link配置及使用(出现can not connect to J-Link via USB请看最后)
- 使用HAL库出现No Cortex-M SW Device Found
- Checking monitor must be configured to display at least 256 colors Could not ex
- No appenders could be found for logger
- No appenders could be found for logger
- cmake: No CMAKE_C_COMPILER could be found
- docker+nexus+jenkins+java+maven
- 【Linux】详解CRC校验
- 守护进程(精灵进程)
- 利用mycat实现mysql读写分离
- Android学习之活动的生命周期
- j-link出现CPU could not be halted;no sw-dp found;Too many errors to display
- Huffman代码调试
- Referenced file contains errors (http://mybatis.org/dtd/mybatis-3-mapper.dtd)报错处理
- Fragment切换
- systemctl 针对 service 类型的配置文件
- 计算机视觉牛人博客和代码汇总
- mysql报错You can't specify target table 'b' for update in FROM clause
- ARP协议和ARP脚本抓取MAC地址
- LeetCode 10. Regular Expression Matching