hi3516a+imx178无线视频传输系统启动执行程序

来源：互联网发布：syslog 数据编辑：程序博客网时间：2024/06/07 03:18

hi3516a无线传输失败

cd /
insmod rtutil3070ap.ko
insmod rt3070ap.ko
insmod rtnet3070ap.ko
ifconfig ra0 up

ifconfig eth0 192.168.10.121 netmask 255.255.255.0
ifconfig ra0 192.168.1.21 netmask 255.255.255.0
cd /123/ko && ./load3516a -a -sensor imx178 -osmem 128
route add default gateway 192.168.1.1
cd .. && ./rtsp //有线传输需要去掉&，否则不好使 cd .. && ./rtsp &

udhcpd /etc/udhcpd.conf &

hi3516a有线传输成功

ifconfig eth0 up
ifconfig eth0 192.168.1.21 netmask 255.255.255.0
cd /123/ko && ./load3516a -a -sensor imx178 -osmem 128
route add default gateway 192.168.1.1
cd .. && ./rtsp

hi3520d无线传输

insmod rtutil3070ap.ko

insmod rt3070ap.ko
insmod rtnet3070ap.ko
ifconfig ra0 up
ifconfig ra0 192.168.1.21 netmask 255.255.255.0
cd /usr/xstrive/ko && ./load3520D_xstrive -i 8d1 128M nvp1914c
route add default gateway 192.168.1.1
cd /usr/xstrive &&./live555MediaServer &
udhcpd /etc/udhcpd.conf &

(/etc/udhcpd.conf)

# Sample udhcpd configuration file (/etc/udhcpd.conf)
# Values shown are defaults

# The start and end of the IP lease block
start           192.168.1.20
end             192.168.1.254

# The interface that udhcpd will use
interface       ra0

# The maximim number of leases (includes addresses reserved
# by OFFER's, DECLINE's, and ARP conficts). Will be corrected
# if it's bigger than IP lease block, but it ok to make it
# smaller than lease block.
#max_leases     254

# The time period at which udhcpd will write out a dhcpd.leases
# file. If this is 0, udhcpd will never automatically write a
# lease file. Specified in seconds.
#auto_time      7200

# The amount of time that an IP will be reserved (leased to nobody)
# if a DHCP decline message is received (seconds).
#decline_time   3600

# The amount of time that an IP will be reserved
# if an ARP conflct occurs (seconds).
#conflict_time 3600

# How long an offered address is reserved (seconds).
#offer_time     60

# If client asks for lease below this value, it will be rounded up
# to this value (seconds).
#min_lease      60

# The location of the leases file
#lease_file     /var/lib/misc/udhcpd.leases

# The location of the pid file
#pidfile        /var/run/udhcpd.pid
# Everytime udhcpd writes a leases file, the below script will be called.
#notify_file                    # default: no script
#notify_file    dumpleases      # useful for debugging

# The following are bootp specific options, settable by udhcpd.
#siaddr         192.168.0.22            #default: 0.0.0.0
#sname          zorak                   #default: none
#boot_file      /var/nfs_root           #default: none

# The remainer of options are DHCP options and can be specifed with the
# keyword 'opt' or 'option'. If an option can take multiple items, such
# as the dns option, they can be listed on the same line, or multiple
# lines. The only option with a default is 'lease'.
# Examples:
opt     dns     192.168.10.2 192.168.10.10
option subnet 255.255.255.0
opt     router 192.168.1.1
opt     wins    192.168.10.10
option dns     129.219.13.81   # appened to above DNS servers for a total of 3
option domain local
option lease   864000          # 10 days of seconds
# Currently supported options (for more info, see options.c):
#opt subnet
#opt timezone
#opt router
#opt timesrv
#opt namesrv
#opt dns
#opt logsrv
#opt cookiesrv
#opt lprsrv
#opt bootsize
#opt domain
#opt swapsrv
#opt rootpath
#opt ipttl
#opt mtu
#opt broadcast
#opt wins
#opt lease
#opt ntpsrv
#opt tftp
#opt bootfile

# Static leases map
#static_lease 00:60:08:11:CE:4E 192.168.0.54
#static_lease 00:60:08:11:CE:3E 192.168.0.44

rt2870.dat文件内容

#The word of "Default" must not be removed
Default
CountryRegion=5
CountryRegionABand=7
CountryCode=TW
BssidNum=1
SSID=SHANJIWIFI
WirelessMode=9
TxRate=0
Channel=11
BasicRate=15
BeaconPeriod=100
DtimPeriod=1
TxPower=100
DisableOLBC=0
BGProtection=0
TxAntenna=
RxAntenna=
TxPreamble=0
RTSThreshold=2347
FragThreshold=2346
TxBurst=1
PktAggregate=0
TurboRate=0
WmmCapable=0
APSDCapable=0
DLSCapable=0
APAifsn=3;7;1;1
APCwmin=4;4;3;2
APCwmax=6;10;4;3
APTxop=0;0;94;47
APACM=0;0;0;0
BSSAifsn=3;7;2;2
BSSCwmin=4;4;3;2
BSSCwmax=10;10;4;3
BSSTxop=0;0;94;47
BSSACM=0;0;0;0
AckPolicy=0;0;0;0
NoForwarding=0
NoForwardingBTNBSSID=0
HideSSID=0
StationKeepAlive=0
ShortSlot=1
AutoChannelSelect=0
IEEE8021X=0
IEEE80211H=0
CSPeriod=10
WirelessEvent=0
IdsEnable=0
AuthFloodThreshold=32
AssocReqFloodThreshold=32
ReassocReqFloodThreshold=32
ProbeReqFloodThreshold=32
DisassocFloodThreshold=32
DeauthFloodThreshold=32
EapReqFooldThreshold=32
PreAuth=0
AuthMode=WPA2PSK
EncrypType=TKIP
RekeyInterval=0
RekeyMethod=DISABLE
PMKCachePeriod=10
WPAPSK=shanji123
DefaultKeyID=1
Key1Type=0
Key1Str=
Key2Type=0
Key2Str=
Key3Type=0
Key3Str=
Key4Type=0
Key4Str=
HSCounter=0
AccessPolicy0=0
AccessControlList0=
AccessPolicy1=0
AccessControlList1=
AccessPolicy2=0
AccessControlList2=
AccessPolicy3=0
AccessControlList3=
WdsEnable=0
WdsEncrypType=NONE
WdsList=
WdsKey=
RADIUS_Server=192.168.2.3
RADIUS_Port=1812
RADIUS_Key=ralink
own_ip_addr=192.168.5.234
EAPifname=br0
PreAuthifname=br0
HT_HTC=0
HT_RDG=0
HT_EXTCHA=0
HT_LinkAdapt=0
HT_OpMode=0
HT_MpduDensity=5
HT_BW=1
HT_AutoBA=1
HT_AMSDU=0
HT_BAWinSize=64
HT_GI=1
HT_MCS=33
MeshId=MESH
MeshAutoLink=1
MeshAuthMode=OPEN
MeshEncrypType=NONE
MeshWPAKEY=
MeshDefaultkey=1
MeshWEPKEY=
WscManufacturer=
WscModelName=
WscDeviceName=
WscModelNumber=
WscSerialNumber=

阅读全文

0 0