解决ntp的错误 no server suitable for synchronization found
来源:互联网 发布:java zip 解压 编辑:程序博客网 时间:2024/05/16 08:40
以下从我在2008年7月10日在http://www.blogjava.net/spray 里写的迁移过来。
当用ntpdate -d 来查询时会发现导致 no server suitable for synchronization found 的错误的信息有以下2个:
错误1.Server dropped: Strata too high
在ntp客户端运行ntpdate serverIP,出现no server suitable for synchronization found的错误。
在ntp客户端用ntpdate –d serverIP查看,发现有“Server dropped: strata too high”的错误,并且显示“stratum 16”。而正常情况下stratum这个值得范围是“0~15”。
这是因为NTP server还没有和其自身或者它的server同步上。
以下的定义是让NTP Server和其自身保持同步,如果在/ntp.conf中定义的server都不可用时,将使用local时间作为ntp服务提供给ntp客户端。
server 127.127.1.0 fudge
127.127.1.0 stratum 8
在ntp server上重新启动ntp服务后,ntp server自身或者与其server的同步的需要一个时间段,这个过程可能是5分钟,在这个时间之内在客户端运行ntpdate命令时会产生no server suitable for synchronization found的错误。
那么如何知道何时ntp server完成了和自身同步的过程呢?
在ntp server上使用命令:
出现画面:
Every 2.0s: ntpq -p Thu Jul 10 02:28:32 2008
remote refid st t when poll reach delay offset jitter
==============================================================================
192.168.30.22 LOCAL(0) 8 u 22 64 1 2.113 179133. 0.001
LOCAL(0) LOCAL(0) 10 l 21 64 1 0.000 0.000 0.001
注意LOCAL的这个就是与自身同步的ntp server。
注意reach这个值,在启动ntp server服务后,这个值就从0开始不断增加,当增加到17的时候,从0到17是5次的变更,每一次是poll的值的秒数,是64秒*5=320秒的时间。
如果之后从ntp客户端同步ntp server还失败的话,用ntpdate –d来查询详细错误信息,再做判断。
错误2.Server dropped: no data
从客户端执行netdate –d时有错误信息如下:
transmit(192.168.30.22)
transmit(192.168.30.22)
transmit(192.168.30.22)
transmit(192.168.30.22)
192.168.30.22: Server dropped: no data
server 192.168.30.22, port 123
28 Jul 17:42:24 ntpdate[14148]: no server suitable for synchronization found
出现这个问题的原因可能有2:
1。检查ntp的版本,如果你使用的是ntp4.2(包括4.2)之后的版本,在restrict的定义中使用了notrust的话,会导致以上错误。
使用以下命令检查ntp的版本:
下面是来自ntp官方网站的说明:
The behavior of notrust changed between versions 4.1 and 4.2.
In 4.1 (and earlier) notrust meant "Don't trust this host/subnet for time".
In 4.2 (and later) notrust means "Ignore all NTP packets that are not cryptographically authenticated." This forces remote time servers to authenticate themselves to your (client) ntpd
解决:
把notrust去掉。
2。检查ntp server的防火墙。可能是server的防火墙屏蔽了upd 123端口。
可以用命令
来关掉iptables服务后再尝试从ntp客户端的同步,如果成功,证明是防火墙的问题,需要更改iptables的设置。
- 解决ntp的错误 no server suitable for synchronization found
- 解决ntp的错误 no server suitable for synchronization found
- 解决ntp的错误 no server suitable for synchronization found
- 解决ntp的错误 no server suitable for synchronization found
- 解决ntp的错误 no server suitable for synchronization found
- 解决ntp的错误 no server suitable for synchronization found
- 解决ntp的错误 no server suitable for synchronization found
- 解决ntp的错误 no server suitable for synchronization found
- 解决ntp的错误 no server suitable for synchronization found
- 解决ntp的错误no server suitable for synchronization found
- 解决ntp的错误 no server suitable for synchronization found
- 解决ntp的错误 no server suitable for synchronization found
- 解决ntp的错误 no server suitable for synchronization found
- 解决ntp的错误 no server suitable for synchronization found
- 解决ntp的错误 no server suitable for synchronization found
- 解决ntp的错误 no server suitable for synchronization found
- 解决ntp的错误 no server suitable for synchronization found
- 解决ntp的错误 no server suitable for synchronization found
- Ajax 不支持enctype="multipart/form-data"
- 利用Pyproj进行地理投影坐标系转换
- Java Annotation Examples
- Android单元测试框架Robolectric3.0介绍(二)
- fgets函数手册误我
- 解决ntp的错误 no server suitable for synchronization found
- java保留两位小数
- Cache数据库安装及配置
- 编译并连接从helloworld.c生成的汇编代码的方法步骤
- 设计模式(22)-模板方法模式
- 接口
- opencv中初探neon
- No 'Access-Control-Allow-Origin' header is present on the requested resource.ajax跨域请求
- C++中的explicit关键字