Ubuntu 安装Cuda8后,分辨率不能调节的解决方案

来源:互联网 发布:中国联通网络测速 编辑:程序博客网 时间:2024/04/30 23:57

不知道从哪里找到的这个方案,反正是能解决了这个问题:

重新升级了CUDA以后,发现在安装CUDA8.0后,分辨率变成800×600,而且不能改变,最终在网上找到了这个方法,运行下面几行代码,然后重启就好了,具体原因还是不是很清楚。

sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.backupsudo touch /etc/X11/xorg.confsudo reboot

下面是错误信息,在重新安装完成显卡驱动后,进入桌面,会出现下面的错误:

Could not apply the stored configuration for monitorsnone of the selected modes were compatible with the possible modes:Trying modes for CRTC 63CRTC 63: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 0)CRTC 63: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 1)Trying modes for CRTC 64CRTC 64: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 0)CRTC 64: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 1)Trying modes for CRTC 65CRTC 65: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 0)CRTC 65: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 1)Trying modes for CRTC 66CRTC 66: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 0)CRTC 66: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 1)
阅读全文
0 0
原创粉丝点击