RabbitMQ 命令配置记录

Microsoft Windows [版本 6.1.7601]
版权所有 (c) 2009 Microsoft Corporation。保留所有权利。


C:\Program Files\RabbitMQ Server\rabbitmq_server-3.6.10\sbin>rabbitmq-plugins.bat list
 Configured: E = explicitly enabled; e = implicitly enabled
 | Status:   * = running on rabbit@R23196646
 |/
[  ] amqp_client                       3.6.10
[  ] cowboy                            1.0.4
[  ] cowlib                            1.0.2
[  ] rabbitmq_amqp1_0                  3.6.10
[  ] rabbitmq_auth_backend_ldap        3.6.10
[  ] rabbitmq_auth_mechanism_ssl       3.6.10
[  ] rabbitmq_consistent_hash_exchange 3.6.10
[  ] rabbitmq_event_exchange           3.6.10
[  ] rabbitmq_federation               3.6.10
[  ] rabbitmq_federation_management    3.6.10
[  ] rabbitmq_jms_topic_exchange       3.6.10
[  ] rabbitmq_management               3.6.10
[  ] rabbitmq_management_agent         3.6.10
[  ] rabbitmq_management_visualiser    3.6.10
[  ] rabbitmq_mqtt                     3.6.10
[  ] rabbitmq_recent_history_exchange  3.6.10
[  ] rabbitmq_sharding                 3.6.10
[  ] rabbitmq_shovel                   3.6.10
[  ] rabbitmq_shovel_management        3.6.10
[  ] rabbitmq_stomp                    3.6.10
[  ] rabbitmq_top                      3.6.10
[  ] rabbitmq_tracing                  3.6.10
[  ] rabbitmq_trust_store              3.6.10
[  ] rabbitmq_web_dispatch             3.6.10
[  ] rabbitmq_web_mqtt                 3.6.10
[  ] rabbitmq_web_mqtt_examples        3.6.10
[  ] rabbitmq_web_stomp                3.6.10
[  ] rabbitmq_web_stomp_examples       3.6.10
[  ] sockjs                            0.3.4


C:\Program Files\RabbitMQ Server\rabbitmq_server-3.6.10\sbin>rabbitmqctl.bat
Error: could not recognise command
Usage:
rabbitmqctl [-n <node>] [-t <timeout>] [-q] <command> [<command options>]


Options:
    -n node
    -q
    -t timeout


Default node is "rabbit@server", where server is the local host. On a host
named "server.example.com", the node name of the RabbitMQ Erlang node will
usually be rabbit@server (unless RABBITMQ_NODENAME has been set to some
non-default value at broker startup time). The output of hostname -s is usually
the correct suffix to use after the "@" sign. See rabbitmq-server(1) for
details of configuring the RabbitMQ broker.


Quiet output mode is selected with the "-q" flag. Informational messages are
suppressed when quiet mode is in effect.


Operation timeout in seconds. Only applicable to "list" commands. Default is
"infinity".


Commands:
    stop [<pid_file>]
    shutdown
    stop_app
    start_app
    wait <pid_file>
    reset
    force_reset
    rotate_logs <suffix>
    hipe_compile <directory>


    join_cluster <clusternode> [--ram]
    cluster_status
    change_cluster_node_type disc | ram
    forget_cluster_node [--offline]
    rename_cluster_node oldnode1 newnode1 [oldnode2] [newnode2 ...]
    update_cluster_nodes clusternode
    force_boot
    sync_queue [-p <vhost>] queue
    cancel_sync_queue [-p <vhost>] queue
    purge_queue [-p <vhost>] queue
    set_cluster_name name


    add_user <username> <password>
    delete_user <username>
    change_password <username> <newpassword>
    clear_password <username>
    authenticate_user <username> <password>
    set_user_tags <username> <tag> ...
    list_users


    add_vhost <vhost>
    delete_vhost <vhost>
    list_vhosts [<vhostinfoitem> ...]
    set_permissions [-p <vhost>] <user> <conf> <write> <read>
    clear_permissions [-p <vhost>] <username>
    list_permissions [-p <vhost>]
    list_user_permissions <username>


    set_parameter [-p <vhost>] <component_name> <name> <value>
    clear_parameter [-p <vhost>] <component_name> <key>
    list_parameters [-p <vhost>]
    set_global_parameter <name> <value>
    clear_global_parameter <name>
    list_global_parameters


    set_policy [-p <vhost>] [--priority <priority>] [--apply-to <apply-to>]
<name> <pattern>  <definition>
    clear_policy [-p <vhost>] <name>
    list_policies [-p <vhost>]


    list_queues [-p <vhost>] [--offline|--online|--local] [<queueinfoitem> ...]
    list_exchanges [-p <vhost>] [<exchangeinfoitem> ...]
    list_bindings [-p <vhost>] [<bindinginfoitem> ...]
    list_connections [<connectioninfoitem> ...]
    list_channels [<channelinfoitem> ...]
    list_consumers [-p <vhost>]
    status
    node_health_check
    environment
    report
    eval <expr>


    close_connection <connectionpid> <explanation>
    trace_on [-p <vhost>]
    trace_off [-p <vhost>]
    set_vm_memory_high_watermark <fraction>
    set_vm_memory_high_watermark absolute <memory_limit>
    set_disk_free_limit <disk_limit>
    set_disk_free_limit mem_relative <fraction>
    encode [--decode] [<value>] [<passphrase>] [--list-ciphers] [--list-hashes]
[--cipher <cipher>] [--hash <hash>] [--iterations <iterations>]


<vhostinfoitem> must be a member of the list [name, tracing].


The list_queues, list_exchanges and list_bindings commands accept an optional
virtual host parameter for which to display results. The default value is "/".


<queueinfoitem> must be a member of the list [name, durable, auto_delete,
arguments, policy, pid, owner_pid, exclusive, exclusive_consumer_pid,
exclusive_consumer_tag, messages_ready, messages_unacknowledged, messages,
messages_ready_ram, messages_unacknowledged_ram, messages_ram,
messages_persistent, message_bytes, message_bytes_ready,
message_bytes_unacknowledged, message_bytes_ram, message_bytes_persistent,
head_message_timestamp, disk_reads, disk_writes, consumers,
consumer_utilisation, memory, slave_pids, synchronised_slave_pids, state].


<exchangeinfoitem> must be a member of the list [name, type, durable,
auto_delete, internal, arguments, policy].


<bindinginfoitem> must be a member of the list [source_name, source_kind,
destination_name, destination_kind, routing_key, arguments].


<connectioninfoitem> must be a member of the list [pid, name, port, host,
peer_port, peer_host, ssl, ssl_protocol, ssl_key_exchange, ssl_cipher,
ssl_hash, peer_cert_subject, peer_cert_issuer, peer_cert_validity, state,
channels, protocol, auth_mechanism, user, vhost, timeout, frame_max,
channel_max, client_properties, recv_oct, recv_cnt, send_oct, send_cnt,
send_pend, connected_at].


<channelinfoitem> must be a member of the list [pid, connection, name, number,
user, vhost, transactional, confirm, consumer_count, messages_unacknowledged,
messages_uncommitted, acks_uncommitted, messages_unconfirmed, prefetch_count,
global_prefetch_count].






C:\Program Files\RabbitMQ Server\rabbitmq_server-3.6.10\sbin>rabbitmqctl.bat trace_on
Starting tracing for vhost "/"


C:\Program Files\RabbitMQ Server\rabbitmq_server-3.6.10\sbin>rabbitmq-plugins.bat
Error: could not recognise command
Usage:
rabbitmq-plugins [-n <node>] <command> [<command options>]


Commands:
    list [-v] [-m] [-E] [-e] [<pattern>]
    enable [--offline] [--online] <plugin> ...
    disable [--offline] [--online] <plugin> ...
    set [--offline] [--online] <plugin> ...






C:\Program Files\RabbitMQ Server\rabbitmq_server-3.6.10\sbin>rabbitmq-plugins.bat enable  rabbitmq_tracing
The following plugins have been enabled:
  amqp_client
  cowlib
  cowboy
  rabbitmq_web_dispatch
  rabbitmq_management_agent
  rabbitmq_management
  rabbitmq_tracing


Applying plugin configuration to rabbit@R23196646... started 7 plugins.

C:\Program Files\RabbitMQ Server\rabbitmq_server-3.6.10\sbin>ipconfig

1.rabbitmq-plugins.bat list --查看命令

2.rabbitmqctl.bat

3.rabbitmqctl.bat trace_on  打开跟踪

4.rabbitmq-plugins.bat

3.rabbitmq-plugins.bat enable  rabbitmq_tracing