STM8在STVD下开发所需的中断向量表模版

简介：在IAR下开发不会自动生成stm8_interrupt_vector.c文件，但是在STVD下会产生该文件，并生成中断向量表 _vectab ,如果要使用stm8_it.c中的函数结构文件来处理中断函数则需要用以下代码替换生成的stm8_interrupt_vector.c。

/* BASIC INTERRUPT VECTORS TABLE FOR STM8 devices * Copyright (c) 2011 STMicroelectronics */#include "stm8s_it.h"typedef void @far (*interrupt_handler_t)(void);struct interrupt_vector {u8 interrupt_instruction;interrupt_handler_t interrupt_handler;};struct interrupt_vector const _vectab[] = {  {0x82, (interrupt_handler_t)_stext}, /* RESET */  {0x82, (interrupt_handler_t)TRAP_IRQHandler}, /* TRAP - Software interrupt */{0x82, (interrupt_handler_t)TLI_IRQHandler}, /* irq0 - External Top Level interrupt (TLI) */{0x82, (interrupt_handler_t)AWU_IRQHandler}, /* irq1 - Auto Wake Up from Halt interrupt */{0x82, (interrupt_handler_t)CLK_IRQHandler}, /* irq2 - Clock Controller interrupt */  {0x82, (interrupt_handler_t)EXTI_PORTA_IRQHandler}, /* irq3 - External interrupt 0 (GPIOA) */{0x82, (interrupt_handler_t)EXTI_PORTB_IRQHandler}, /* irq4 - External interrupt 1 (GPIOB) */{0x82, (interrupt_handler_t)EXTI_PORTC_IRQHandler}, /* irq5 - External interrupt 2 (GPIOC) */{0x82, (interrupt_handler_t)EXTI_PORTD_IRQHandler}, /* irq6 - External interrupt 3 (GPIOD) */{0x82, (interrupt_handler_t)EXTI_PORTE_IRQHandler}, /* irq7 - External interrupt 4 (GPIOE) */#if defined (STM8S208) || defined (STM8AF52Ax){0x82, (interrupt_handler_t)CAN_RX_IRQHandler}, /* irq8 - CAN Rx interrupt */{0x82, (interrupt_handler_t)CAN_TX_IRQHandler}, /* irq9 - CAN Tx/ER/SC interrupt */#elif defined (STM8S903){0x82, (interrupt_handler_t)EXTI_PORTF_IRQHandler}, /* irq8 - External interrupt 5 (GPIOF) */{0x82, (interrupt_handler_t)NonHandledInterrupt}, /* irq9 - Reserved */#else /*STM8S207, STM8S105 or STM8AF62Ax or STM8AF626x*/{0x82, (interrupt_handler_t)NonHandledInterrupt}, /* irq8 - Reserved */{0x82, (interrupt_handler_t)NonHandledInterrupt}, /* irq9 - Reserved */#endif /* STM8S208 or STM8AF52Ax */{0x82, (interrupt_handler_t)SPI_IRQHandler}, /* irq10 - SPI End of transfer interrupt */{0x82, (interrupt_handler_t)TIM1_UPD_OVF_TRG_BRK_IRQHandler}, /* irq11 - TIM1 Update/Overflow/Trigger/Break interrupt */{0x82, (interrupt_handler_t)TIM1_CAP_COM_IRQHandler}, /* irq12 - TIM1 Capture/Compare interrupt */  #ifdef STM8S903  {0x82, (interrupt_handler_t)TIM5_UPD_OVF_BRK_TRG_IRQHandler}, /* irq13 - TIM5 Update/Overflow/Break/Trigger interrupt  */  {0x82, (interrupt_handler_t)TIM5_CAP_COM_IRQHandler}, /* irq14 - TIM5 Capture/Compare interrupt */#else /*STM8S208, STM8S207, STM8S105 or STM8S103 or STM8AF62Ax or STM8AF52Ax or STM8AF626x*/  {0x82, (interrupt_handler_t)TIM2_UPD_OVF_BRK_IRQHandler}, /* irq13 - TIM2 Update/Overflow/Break interrupt  */  {0x82, (interrupt_handler_t)TIM2_CAP_COM_IRQHandler}, /* irq14 - TIM2 Capture/Compare interrupt */#endif /*STM8S903*/#if defined (STM8S208) || defined(STM8S207) || defined(STM8S007) || defined(STM8S105) || \    defined(STM8S005) ||  defined(STM8AF52Ax) || defined(STM8AF62Ax) || defined(STM8AF626x)  {0x82, (interrupt_handler_t)TIM3_UPD_OVF_BRK_IRQHandler}, /* irq15 - TIM3 Update/Overflow/Break interrupt */  {0x82, (interrupt_handler_t)TIM3_CAP_COM_IRQHandler}, /* irq16 - TIM3 Capture/Compare interrupt */#else{0x82, (interrupt_handler_t)NonHandledInterrupt}, /* irq15 - Reserved */{0x82, (interrupt_handler_t)NonHandledInterrupt}, /* irq16 - Reserved */#endif /*STM8S208, STM8S207, STM8S105 or STM8AF62Ax or STM8AF52Ax or STM8AF626x*/#if defined (STM8S105) || defined (STM8S005) || defined(STM8AF626x){0x82, (interrupt_handler_t)NonHandledInterrupt}, /* irq17 - Reserved */{0x82, (interrupt_handler_t)NonHandledInterrupt}, /* irq18 - Reserved */#else{0x82, (interrupt_handler_t)UART1_TX_IRQHandler}, /* irq17 - UART1 Tx complete interrupt */{0x82, (interrupt_handler_t)UART1_RX_IRQHandler}, /* irq18 - UART1 Rx interrupt */#endif /*STM8S105 or STM8AF626x */{0x82, (interrupt_handler_t)I2C_IRQHandler}, /* irq19 - I2C interrupt */#if defined(STM8S208) || defined(STM8S207) || defined(STM8S007) || defined(STM8AF52Ax) || defined(STM8AF62Ax){0x82, (interrupt_handler_t)UART3_TX_IRQHandler}, /* irq20 - UART3 Tx interrupt */{0x82, (interrupt_handler_t)UART3_RX_IRQHandler}, /* irq21 - UART3 Rx interrupt */#elif defined (STM8S105) || defined (STM8S005) || defined (STM8AF626x){0x82, (interrupt_handler_t)UART2_TX_IRQHandler}, /* irq20 - UART2 Tx interrupt */{0x82, (interrupt_handler_t)UART2_RX_IRQHandler}, /* irq21 - UART2 Rx interrupt */#else /* STM8S103, STM8S903 */{0x82, (interrupt_handler_t)NonHandledInterrupt}, /* irq20 - Reserved */{0x82, (interrupt_handler_t)NonHandledInterrupt}, /* irq21 - Reserved */#endif /* STM8S208, STM8S207, STM8AF52Ax or STM8AF62Ax */#if defined(STM8S208) || defined(STM8S207) || defined(STM8S007) || defined(STM8AF52Ax) || defined(STM8AF62Ax){0x82, (interrupt_handler_t)ADC2_IRQHandler}, /* irq22 - ADC2 end of conversion interrupt */#else /* STM8S105, STM8S103, STM8S903 */{0x82, (interrupt_handler_t)ADC1_IRQHandler}, /* irq22 - ADC1 end of conversion/Analog watchdog interrupts */#endif /* STM8S208, STM8S207, STM8AF52Ax or STM8AF62Ax */#ifdef STM8S903{0x82, (interrupt_handler_t)TIM6_UPD_OVF_TRG_IRQHandler}, /* irq23 - TIM6 Update/Overflow/Trigger interrupt */#else{0x82, (interrupt_handler_t)TIM4_UPD_OVF_IRQHandler}, /* irq23 - TIM4 Update/Overflow interrupt */#endif /*STM8S903*/{0x82, (interrupt_handler_t)EEPROM_EEC_IRQHandler},  /* irq24 - FLASH interrupt */{0x82, (interrupt_handler_t)NonHandledInterrupt}, /* irq25 - Reserved */{0x82, (interrupt_handler_t)NonHandledInterrupt}, /* irq26 - Reserved */{0x82, (interrupt_handler_t)NonHandledInterrupt}, /* irq27 - Reserved */{0x82, (interrupt_handler_t)NonHandledInterrupt}, /* irq28 - Reserved */{0x82, (interrupt_handler_t)NonHandledInterrupt}, /* irq29 - Reserved */};/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/