git subtree有效管理公共第三方lib
来源：互联网 发布：ubuntu安装py模块 编辑：程序博客网 时间：2024/06/07 23:08
git subtree是附属于git的附加工具，默认情况下并不会安装。https://github.com/git/git/tree/master/contrib/subtree。注意新版本的git中已经默认包含了subtree这个子命令
#git clone https://github.com/git
# cd git# make prefix=/usr/local/git install
# echo "export PATH=$PATH:/usr/local/git/bin" >> /etc/bashrc# source /etc/bashrc
# cd contrib/subtree
# makeprefix=/usr/local/git/bin
# makeprefix=/usr/local/git/bin install
# makeprefix=/usr/local/git/bin install-doc
# cp git-subtree/usr/local/git/bin :一旦将git-bustree copy到git/bin目录下，执行git subtree 命令时，git就可以查找并且调用到这个subtree子命令了！
就ok了！在本文中，我们假设我们工作在subtree-p这个项目中（放在github上的一个repo），而在该项目中，我们需要subtree-sub这个子模块（或者说是Lib）.
当前我们的subtree-p项目中，没有引入任何subtree-sub这个模块，现在我们通过以下命令来实现：
(master)$ git remote add subtree-sub-remote https://github.com/cnweibo/subtree-sub.git (master)$ git remote -v origin https://github.com/cnweibo/subtree-p.git (fetch) origin https://github.com/cnweibo/subtree-p.git (push) subtree-sub-remote https://github.com/cnweibo/subtree-sub.git (fetch) subtree-sub-remote https://github.com/cnweibo/subtree-sub.git (push) (master)$ pwd /home/cabox/workspace/subtreetest/subtree-p (master)$ ls README.md (master)$ git subtree add --prefix=mysubtree subtree-sub-remote master git fetch subtree-sub-remote master warning: no common commits remote: Counting objects: 3, done. remote: Total 3 (delta 0), reused 0 (delta 0), pack-reused 0 Unpacking objects: 100% (3/3), done. From https://github.com/cnweibo/subtree-sub * branch master -> FETCH_HEAD * [new branch] master -> subtree-sub-remote/master Added dir 'mysubtree' (master)$ ls README.md mysubtree (master)$ ls -la mysubtree/ total 12 drwxrwxr-x 2 cabox cabox 4096 May 31 02:14 . drwxrwxr-x 4 cabox cabox 4096 May 31 02:14 .. -rw-rw-r-- 1 cabox cabox 14 May 31 02:14 README.md
上面的一系列命令中，首先在subtree-p项目目录中引入了subtree-sub这个子项目，它存放在目录mysubtree中，和我们的subtree-sub-remote这个remote相对应。这时，subtree-p项目由于增加了新的目录（subtree-sub子项目repo），因此需要commit和push.
注意：在mysubtree这个子目录中是没有任何.git文件的，它实际上是subtree-sub这个子项目repo的纯代码copy！！ git subtree add命令本身不会像git submodule add一样添加任何meta data@！！
(master)$ git s On branch master Your branch is ahead of 'origin/master' by 2 commits. (use "git push" to publish your local commits) nothing to commit, working directory clean (master)$ git push Username for 'https://github.com': kidsit Password for 'https://kidsit@github.com': Counting objects: 5, done. Delta compression using up to 12 threads. Compressing objects: 100% (3/3), done. Writing objects: 100% (5/5), 528 bytes | 0 bytes/s, done. Total 5 (delta 0), reused 0 (delta 0) To https://github.com/cnweibo/subtree-p.git 67da25d..c1e6018 master -> master
这时，我们查看在github上的subtree-p repo，你就可以看到这个父项目已经引入了mysubtree（代表了subtree-sub repo！）
现在我们在parent项目中对子项目做修改并且commit, push：
(master)$ echo "kidsit add subfile1 within parent" >subfile1 (master)*$ git s On branch master Your branch is up-to-date with 'origin/master'. Untracked files: (use "git add <file>..." to include in what will be committed) subfile1 nothing added to commit but untracked files present (use "git add" to track) (master)*$ git a . (master)*$ git ci "kidsit add subfile1 within parent" [master ed30a68] kidsit add subfile1 within parent 1 file changed, 1 insertion(+) create mode 100644 mysubtree/subfile1 (master)$ git s On branch master Your branch is ahead of 'origin/master' by 1 commit. (use "git push" to publish your local commits) nothing to commit, working directory clean (master)$ git push Username for 'https://github.com': kidsit Password for 'https://kidsit@github.com': Counting objects: 4, done. Delta compression using up to 12 threads. Compressing objects: 100% (3/3), done. Writing objects: 100% (4/4), 398 bytes | 0 bytes/s, done. Total 4 (delta 0), reused 0 (delta 0) To https://github.com/cnweibo/subtree-p.git c1e6018..ed30a68 master -> master (master)$
这时我们再查看github上的subtree-p我们就能看到我们对子项目的新的改动了：
我们来继续模拟代码开发过程：修改subtree-p和subtree-sub后，统一一次性做一个提交：
(master)$ echo "kidsit change README for p" >README.md (master)*$ echo "kidsit add new subfileNew2 " >mysubtree/subfileNew2 (master)*$ git s On branch master Your branch is up-to-date with 'origin/master'. Changes not staged for commit: (use "git add <file>..." to update what will be committed) (use "git checkout -- <file>..." to discard changes in working directory) modified: README.md Untracked files: (use "git add <file>..." to include in what will be committed) mysubtree/subfileNew2 no changes added to commit (use "git add" and/or "git commit -a") (master)*$ git a . (master)*$ git ci "kidsit change p and s in ONE commit" [master a27d335] kidsit change p and s in ONE commit 2 files changed, 2 insertions(+), 2 deletions(-) create mode 100644 mysubtree/subfileNew2 (master)$ git push Username for 'https://github.com': kidsit Password for 'https://kidsit@github.com': Counting objects: 5, done. Delta compression using up to 12 threads. Compressing objects: 100% (3/3), done. Writing objects: 100% (5/5), 461 bytes | 0 bytes/s, done. Total 5 (delta 0), reused 0 (delta 0) To https://github.com/cnweibo/subtree-p.git ed30a68..a27d335 master -> master (master)$
这时，我们要注意，我们再subtree-p项目中对父项目和子项目分别都做了修改，但是子项目本身的repo还没有做过任何更新，它根本不知道你曾经做过修改，这时，如果你希望将你对子项目的修改贡献出来，可以执行git subtree push命令
(master)$ git push Username for 'https://github.com': kidsit Password for 'https://kidsit@github.com': Counting objects: 5, done. Delta compression using up to 12 threads. Compressing objects: 100% (3/3), done. Writing objects: 100% (5/5), 461 bytes | 0 bytes/s, done. Total 5 (delta 0), reused 0 (delta 0) To https://github.com/cnweibo/subtree-p.git ed30a68..a27d335 master -> master (master)$ git subtree push --prefix=mysubtree/ subtree-sub-remote master git push using: subtree-sub-remote master Username for 'https://github.com': kidsit Password for 'https://kidsit@github.com': Counting objects: 6, done. Delta compression using up to 12 threads. Compressing objects: 100% (4/4), done. Writing objects: 100% (6/6), 563 bytes | 0 bytes/s, done. Total 6 (delta 1), reused 0 (delta 0) To https://github.com/cnweibo/subtree-sub.git 9a0ef93..001c5d8 001c5d86c4da43ab676aaeb49763d5353353159f -> master
上面我们分别对subtree-p这个父项目和subtree-sub这个子项目分别作了push操作分享（一般来说对子项目push是非常少见的动作，因为我们更多的是拿别人的lib来用而不是开发），这时如果我们去看github上的两个项目repo的commit历史，你会发现两个repo上都有了同一个commit！！
正因为如此，我们最好是将父项目和子项目分别做commit，不要混淆在一起！这样做的好处是git subtree push时，git会自动将对父项目和子项目的commit区分清楚的，对父项目的修改不会出现在子项目repo修改历史中！
现在，我们假设另外一个人对subtree-sub这个repo独立做了新的开发，有了一个commit,但是我们的subtree-p项目实际上对此毫不知情，我们怎么能够获取别人对我们用到的子项目lib来更新呢？
在父项目目录中执行git subtree pull命令：
(master)$ git subtree pull --prefix=mysubtree -squash subtree-sub-remote master You need to run this command from the toplevel of the working tree. (master)$ kidsit -bash: kidsit: command not found (master)$ pwd /home/cabox/workspace/subtreetest/subtree-p/mysubtree (master)$ cd .. (master)$ ls README.md mysubtree (master)$ pwd /home/cabox/workspace/subtreetest/subtree-p (master)$ git subtree pull --prefix=mysubtree subtree-sub-remote master remote: Counting objects: 3, done. remote: Compressing objects: 100% (3/3), done. remote: Total 3 (delta 0), reused 3 (delta 0), pack-reused 0 Unpacking objects: 100% (3/3), done. From https://github.com/cnweibo/subtree-sub * branch master -> FETCH_HEAD 001c5d8..55689fc master -> subtree-sub-remote/master Merge made by the 'recursive' strategy. mysubtree/standardaloneChangeInsubtreesubRepo | 1 + 1 file changed, 1 insertion(+) create mode 100644 mysubtree/standardaloneChangeInsubtreesubRepo (master)$ git lg * 4d2a47a (HEAD -> master) Merge commit '55689fc679ec0eeaf0a7853cd348309dad99fb96' from cnweibo update as standard dev |\ | * 55689fc (subtree-sub-remote/master) new content as a standard repo dev env for subtree-sub by cnweibo | * 001c5d8 kidsit change p and s in ONE commit | * ef33027 kidsit add subfile1 within parent * | a27d335 (origin/master, origin/HEAD) kidsit change p and s in ONE commit * | ed30a68 kidsit add subfile1 within parent * | c1e6018 Add 'mysubtree/' from commit '9a0ef93b82b73fee89dd3d5123d441680c2a7e40' |\ \ | |/ | * 9a0ef93 Initial commit * 67da25d p 2 * f05da04 Create README.md (master)$ ls .git/ README.md mysubtree/ (master)$ ls mysubtree/ README.md subfile1 standardaloneChangeInsubtreesubRepo subfileNew2 (master)$ ls mysubtree/ README.md standardaloneChangeInsubtreesubRepo subfile1 subfileNew2 (master)$ git push Username for 'https://github.com': kidsit Password for 'https://kidsit@github.com': Counting objects: 8, done. Delta compression using up to 12 threads. Compressing objects: 100% (8/8), done. Writing objects: 100% (8/8), 1.06 KiB | 0 bytes/s, done. Total 8 (delta 1), reused 0 (delta 0) To https://github.com/cnweibo/subtree-p.git a27d335..4d2a47a master -> master (master)$
上述命令主要是在subtree-p项目中pull别的独立项目对subtree-sub子模块的贡献，随后git push到主项目的repo中独立引用那一份修改。
接下来，我们来看新的项目成员进到我们的subtree-p项目中，他又该如何呢？
他首先需要做的是git clone yourParentRep, 随后git rm -r subModule, git add ,git commit.这时他的working directory中不再含有subModule的代码，他需要做的是手工创建git remote add --prefix=submodDirectory submodRemote master/v1.0,注意：在这里可以指定一个tag来选择相应的历史版本！！！ git subtree add submodRemote xxxx.git master获取subrep代码到你的submodDirectory目录，这样他自己clone的repo就有了和submodRepo的联系了，他也可以对父项目和子项目来做贡献了。
请参考： https://lostechies.com/johnteague/2014/04/04/using-git-subtrees-to-split-a-repository/
git subtree方式管理的parent项目最终是包含所有子模块的完整代码的（可以不含子模块的历史），同时支持对子项目的contribute。
在一个前台可能被share，后台可能从一个换成另外一个，这样的场景就比较适合使用subtree来管理。
接下来我们再看另外一种情况： 在一个项目中，当我们完整做完稳定版本后，我们希望将public前端拿出来作为一个独立的repo来管理，这样前端和后端完全可以独立开发，要实现这个，就需要使用git subtree split命令了：
(master)$ ls README.md mysubtree(master)$ git subtree split --prefix=mysubtree -b splittedbranch Created branch 'splittedbranch' 55689fc679ec0eeaf0a7853cd348309dad99fb96 (master)$ git s On branch master Your branch is up-to-date with 'origin/master'. nothing to commit, working directory clean (master)$ git branch -a * master splittedbranch remotes/origin/HEAD -> origin/master remotes/origin/master (master)$ ls README.md mysubtree (master)$ git remote add splittedRemote https://github.com/cnweibo/splitted.git (master)$ git checkout splittedbranch Switched to branch 'splittedbranch' (splittedbranch)$ ls README.md standardaloneChangeInsubtreesubRepo subfile1 subfileNew2 (splittedbranch)$ pwd /home/cabox/workspace/subtreesplit/superrepo (splittedbranch)$ ls README.md standardaloneChangeInsubtreesubRepo subfile1 subfileNew2 (splittedbranch)$ git remote -v origin https://github.com/cnweibo/subtree-p.git (fetch) origin https://github.com/cnweibo/subtree-p.git (push) splittedRemote https://github.com/cnweibo/splitted.git (fetch) splittedRemote https://github.com/cnweibo/splitted.git (push) (splittedbranch)$ git push splittedRemote splittedbranch:master Username for 'https://github.com': kidsit Password for 'https://kidsit@github.com': Counting objects: 15, done. Delta compression using up to 12 threads. Compressing objects: 100% (11/11), done. Writing objects: 100% (15/15), 1.43 KiB | 0 bytes/s, done. Total 15 (delta 2), reused 0 (delta 0) To https://github.com/cnweibo/splitted.git 2d00c85..703b820 splittedbranch -> master
上面的一串命令将parent项目的mysubtree目录被splitted到splittedbranch上（当你checkout这个splittedbranch时，你看到的就只有这个目录的文件了！），随后将该branch上的内容push到remote中，这就形成了独立的repo了。随后你要做的是在父项目中，将该子文件夹删除，通过git subtree来引用这个共享的repo
http://blog.nwcadence.com/git-subtrees/
注意：git filter-branch 也可以实现类似的git subtree split的功能，将一个repo的部分目录分割为一个新的repo.
具体可参考： https://help.github.com/articles/splitting-a-subfolder-out-into-a-new-repository/
另外一篇文章： http://log.pardus.de/2012/08/modular-git-with-git-subtree.html 可以参考更好的思路
- git subtree有效管理公共第三方lib
- 171 git subtree 管理子项目
- 第三方后台管理
- CocoaPods管理第三方
- 第三方频道管理
- git(十三)-git subtree
- android lib 第三方 库的使用
- c++ 使用的第三方lib库
- 如何添加Android第三方lib
- Javaweb 好用的第三方Lib
- 微信第三方公共接口
- android studio导出lib和使用第三方lib
- git subtree 的使用方法
- git subtree用法
- Git Subtree 的使用
- git subtree 的安装
- git-子模块subtree
- Git subtree 日常使用
- linux下从源代码安装git
- 使用git submodule管理一个需要多个分立开发或者第三方repo的项目
- 使用public key来做SSH authentication
- PHP项目中composer和Git的组合使用
- [LeetCode]1. Two Sum
- git subtree有效管理公共第三方lib
- B和B+树
- 如何将开源项目部分代码作为private放在github上？
- Oracle 12c 数据库监听程序消失解决方法
- PIC18F,ECAN例程，支持CAN总线活动唤醒
- Phar文件
- git cheatsheet小抄本
- linux下gitflow辅助工具安装和使用
- maven常见命令
