kali安装tor
来源：互联网 发布：电脑网络开关设置 编辑：程序博客网 时间：2024/05/22 14:21
http://www.blackmoreops.com/2013/12/16 /installing-tor-kali-linux/
blackMORE Ops Learn one trick a day ….
- How to
Fix Java error Unsigned application requesting unrestricted access to system
June 8, 2017
hpssacli command on ESXi and adding new Disk to ESXi host
June 6, 2017
USB and SSD drive speedtest in Linux
April 4, 2017
dns2proxy – Offensive DNS server post-explotation tool – DNS spoofing, phishing and pharming
March 22, 2017
How to install VirtualBox Guest Additions in Kali Linux (Kali Rolling / Kali Linux 2016.2 / Kali 2017)
January 24, 2017
Steganography in Kali Linux – Hiding data in image
January 11, 2017
How to add RBL on Zimbra Server?
December 19, 2016
Installing Tor in Kali Linux
Tor is free software and an open network that helps you defend against traffic analysis, a form of network surveillance that threatens personal freedom and privacy, confidential business activities and relationships, and state security. 
This guide guides your through installing tor in Kali Linux.
Why anonymity matters?
Tor protects you by bouncing your communications around a distributed network of relays run by volunteers all around the world: it prevents somebody watching your Internet connection from learning what sites you visit, and it prevents the sites you visit from learning your physical location.
[Source: https://www.torproject.org/]Installing Tor in Kali Linux:
Step 1: Getting tor service ready
There are 3 ways of installing Tor service in Kali Linux. You can install Tor by following any of these options:
Option #1: Install Tor from Kali Repository
Tor is available in Kali repository, to install it directly from the repository open your Terminal and type this:
apt-get install tor
If no error occurs, follow the second step.
Option #2: Install Tor from Debian Wheezy Repository
If you can’t install Tor using the first method then you may try this option. In this way we are going to add the official Tor repository according to our Debian distribution. Not to be confused, Kali is actually based on Debian and it uses the package management from “Wheezy”. So we are going to use “Wheezy” as our distribution.
Now open your terminal and follow these steps:
Step #1: Add repo to sources.list file
Lets add the distribution in the list by opening the sources.list file
leafpad /etc/apt/sources.list
Now add the following line at the bottom of the file,
deb http://deb.torproject.org/torproject.org wheezy main
Step #2: Add GPG Keys
Now we need to add the gpg key used to sign the packages by running the following commands:
gpg --keyserver keys.gnupg.net --recv 886DDD89gpg --export A3C4F0F979CAA22CDBA8F512EE8CBC9E886DDD89 | apt-key add -
Step #3: Update package lists
Lets refresh our sources:
apt-get update
Step #4: Install singing keys
Now, before installing the Tor we must add the signing key,
apt-get install deb.torproject.org-keyring
Step #5: Install Tor from Debian repository
Finally,
apt-get install tor
Now Tor should be installed!
If no error occurs, follow the second step.
Option #3: Install Tor from development branch
If you are an advanced user and you want to install Tor using the development branch then this method is for you.
Step #1: Add Tor project repository to sources.list
You need to add a different set of lines to your /etc/apt/sources.list file:
deb http://deb.torproject.org/torproject.org wheezy maindeb http://deb.torproject.org/torproject.org tor-experimental-0.2.5.x- wheezy main
Step #2: Add GPG keys, keyring and install Tor
Then run the following commands at your command prompt:
gpg --keyserver keys.gnupg.net --recv 886DDD89gpg --export A3C4F0F979CAA22CDBA8F512EE8CBC9E886DDD89 | apt-key add -apt-get updateapt-get install tor deb.torproject.org-keyring
Now Tor should be installed!
If no error occurs, follow the second step.
Note: This release will provide you more features but it contains bugs too.
Option #4: Build and Install Tor from sources
If you want to build your own debs from source you must first add an appropriatedeb-src line to sources.list.
deb-src http://deb.torproject.org/torproject.org wheezy maindeb-src http://deb.torproject.org/torproject.org wheezy maindeb-src http://deb.torproject.org/torproject.org tor-experimental-0.2.5.x--wheezy main
You also need to install the necessary packages to build your own debs and the packages needed to build Tor:
apt-get install build-essential fakeroot devscriptsapt-get build-dep tor
Then you can build Tor in ~/debian-packages:
mkdir ~/debian-packages; cd ~/debian-packagesapt-get source torcd tor-*debuild -rfakeroot -uc -uscd ..
Now you can install the new package:
dpkg -i tor_*.deb
Step #2: Downloading and Running Tor bundle
Download the Tor Bundle from here,
https://www.torproject.org/projects/torbrowser.html.en
Download the architecture-appropriate file above, save it somewhere, then run one of the following two commands to extract the package archive:
tar -xvzf tor-browser-gnu-linux-i686-2.3.25-15-dev-LANG.tar.gz
or (for the 64-bit version):
tar -xvzf tor-browser-gnu-linux-x86_64-2.3.25-16-dev-LANG.tar.gz
(where LANG is the language listed in the filename).
Once that’s done, switch to the Tor browser directory by running:
cd tor-browser_LANG
(whereLANG is the language listed in the filename).
To run the Tor Browser Bundle, execute the start-tor-browser script:
./start-tor-browser
This will launch Vidalia and once that connects to Tor, it will launchFirefox.
Note: Do not unpack or run TBB as root. (though in Kali Linux, it doesn’t make any differences)
Conclusion
How secured is TOR? It’s only as secured as the upstream nodes are! VPN is always better solution and to be honest, VPN is faster than TOR. In case you’ve already tried TOR and it didn’t hold up to your requirements, you should try tosetup VPN to bypass security or restrictions.torsocks is another alternative to using TOR and it’s somewhat faster as there’s less users on that at anytime.
Thanks for reading. Please share with friends.
RELATED ARTICLES
20 things to do after installing Kali Linux 1.x
Evade monitoring by IP spoofing in Kali Linux with torsocks
Create hidden service in TOR like Silk Road or DarkNet
Check Also
How to install VirtualBox Guest Additions in Kali Linux (Kali Rolling / Kali Linux 2016.2 / Kali 2017)
Since Kali Linux 2016 came out (also known as Kali Rolling), it seems that Official …
Run Kali Linux in Microsoft Azure on SSD for free
Big news for Kali Linux users, now you can run Kali Linux in Microsoft Azure …
43 comments
Leave a Reply. (Anonymous comments allowed). Use WP, Twitter, FaceBook or Google+ for faster responses.Cancel reply
- lundgren@byu.net: Thank you!!...
- Pete: Hello BMO fans. I made a mistake while installing Kali 2.0 64bit!!! on a USB 3.0...
- Bob Kodadek: Alex didn't do anything of the kind! Alex stole the article and "PL2303_64bit_ I...
- Destiny: Nice work there But my step 3 of installing gbedi did not go through as it gave...
- FrostyLeaf: Black screen with "-".... Please help...
Fix Java error Unsigned application requesting unrestricted access to system
June 8, 2017hpssacli command on ESXi and adding new Disk to ESXi host
June 6, 2017USB and SSD drive speedtest in Linux
April 4, 2017
Pay the Ransom or Face the Music – Hackers Threaten Apple Over iCloud Compromised Accounts
March 24, 2017
Fix for Prolific USB to Serial RJ45 Ethernet Code 10 error
March 23, 2017
- kali安装tor
- How to install and setup Tor on Kali Linux 2.0（如何在Kali Linux 2.0 下安装 Tor）
- Kali linux tor浏览器重新启动无法启动
- Ubuntu安装tor
- ubuntu 安装tor
- KaliLinux安装Tor浏览器
- windows 安装Tor 浏览器
- Four avaiable ways to install Tor in kali
- linux 下tor 的安装
- Ubuntu 下tor的安装
- Tor
- Tor
- Tor Browser Bundle(Tor+Firefox)安装flash player插件
- Kali 安装
- kali安装
- Ubuntu10.10下安装Tor，Polipo&Vidalia
- Kali安装VirtualBox
- kali安装OpenVas 6
- openstack storlet 文档（四）：storlet引擎
- Aidl
- Bootstrap Table使用整理（五）-分页组合查询
- 网络自媒体人范亮亮的陈年旧事
- java 无序数组中两个元素相加等于指定的数 o（n）
- kali安装tor
- [第七季]8.通过JQuery获取或者设置网页元素的值
- KeyguardManager（判断安全密码）
- zoj 3005 矩形覆盖 + 搜索
- 连咸鱼都能学会的Java多线程实现
- 很抠的—复习提纲
- [设计模式](七)：外观模式(Fecade)与桥接模式(Bridge)详解
- 灵云智能语音之语音合成（云端）SDK的使用
- 【Linux】生成SSH-KEY
Very helpful..Thanks
you say don't run or unpack as root. But on kali linux you are always root. What do you recomend? Create a non-root user or forget about this "don't run as root" bizo?
you are not root all the time… create a new user and protect your ass…
Hi Roger,
I didn't wrote that article. I guess that's what's recommended by TOR Project because of security risk where TOR might open up a port. In Kali, it doesn't really matter. I'll leave that line cause TOR can be used by Ubuntu/Debian non-root users as well and this serves up as a reminder not to run things you don't know as root.
Personally I install tor(apt-get install tor), run tor service (service tor start) and use proxychains (proxychains iceweasel) to browse if I have to. Lastly I tail my log /var/log/tor/log to see the activities and keep a copy of that log separately stored.
Good catch though. Thanks.
For those who gets “The Tor Browser Bundle should not be run as root. Exiting”
it’s because you’re running it as root
You have 2 options
– Make another user
– Remove these lines of code:
– Type
nano start-tor-browser
– Comment those lines
#if [ “`id -u`” -eq 0 ]; then
# complain “The Tor Browser Bundle should not be run as root. Exiting.”
# exit 1
#fi
Now you can start as root
WHY IS THIS HAPPENING? PLEASE HELP ME!
guest@SarthaK:/home/tor-browser_en-US$ cd /home/tor-browser_en-US && ./start-tor-browser -G
Launching Tor Browser Bundle for Linux in /home/tor-browser_en-US
No protocol specified
Error: cannot open display: :0.0
Tor Browser exited abnormally. Exit code: 1
Hi Sarthak,
Run as ROOT and see how that works (or as sudo user). Good Luck.
-BMO
Did you get thsi resolved? I’m having the same problem.
Hello. I know this is a bit old, but was wondering if blackops might be able to assist me.
I’ve run through your tut and got everything fine up until launching tor where im getting this message:
May 11 02:07:41.814 [notice] Opening Control listener on 127.0.0.1:9151
May 11 02:07:41.814 [warn] Could not bind to 127.0.0.1:9151: Cannot assign requested address
May 11 02:07:41.814 [warn] Failed to parse/validate config: Failed to bind one of the listener ports.
May 11 02:07:41.814 [err] Reading config failed–see warnings above.
Tor Browser exited cleanly.
I’ve taken a look at some of the config files but don’t really know what im doing. I’m running kali on virtualbox and already have tor installed on my host. Not sure if that makes if a difference. If its too much of a bother, no worries, but any advice is appreciated. Thanks.
Hi 5p412120w,
I think you’ve installed Vidalia and trying to use TOR via that. In that case change port to 9051.
For Vidalia try this:
Settings > Advanced > Tor Control and checked Use TCP Connection (ControlPort) with the address 127.0.0.1:9051
Another way is to kill tor as TOR daemon was already running which Vidalia didnt like.
Followed by the following command:
and then retry.
Good luck.
-BMO.
Does this require firefox? Iceweasel is the default in kali.
No it doesn’t require FireFox. You can use ProxyChain to pipe Tor to IceWeasel.
should do it. The benefit of using ProxyChains is that you can use almost any application via that … i.e.
etc. Cheers,
-BMO
Hi BMO,
i could install the TOR for kali linux and the proxychain icweasel.
i want to recd the target annonymously. how an i be sure that i am behind tor network or proxychain is working. Please tell method to check nad confirm that
thanks in anticipation
Happy Hunting
http://www.whatismyip.com shows your IP.
What you’re asking is probably how you can be completely anonymous. There’s no such thing as that! You can however change DNS and MAC (check tor manuals for more) to be somewhat anonymous. Note that tracking is not done based on IP anymore (well, the very basic form of it). Advanced tracking is done using cookies, browsing patterns, common search strings and many more. Also, no matter what you do, you are possibly jumping from one AS area to the next which can be tracked back as most of the backends lives in first world and you know who controls those.
Don’t do this. If you run Firefox via proxychains DNS queries won’t go over ToR and you’ll burn yourself. Use the ToR bundled browser.
how to install vidalia
apt-get install vidaliashould do the trick…When i enter tar -xvzf tor-browser-gnu-linux-x86_64-2.3.25-16-dev-LANG.tar.gz, it say that the file does exist. I put the newer version of the code in, but it still says that the file doesn’t exist.
When I input the following command:
apt-get install deb.torproject.org-keyring
I get the following output:
Reading package lists… Done
Building dependency tree
Reading state information… Done
E: Unable to locate package deb.torproject.org-keyring.gpg
E: Couldn’t find any package by regex ‘deb.torproject.org-keyring.gpg’
I’ve been searching online, but I can’t find a good answer
I’m running Kali v1.0.8 in VirtualBox v4.3.20
This might help.
Fixing error: Package packagename is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package ‘packagename’ has no installation candidate
I just finished trying this, but unfortunately I ended up with the same result in the end
Trying to update the repo. On the Tor site, it says to:
Add this line to your /etc/apt/sources.list file:
deb http://deb.torproject.org/torproject.org main
Above you call it wheezy. is that still the proper DISTRIBUTION as of January- 2015?
root@sebakurz-imac:/home/sebastiankurz# tar -xvzf tor-browser-gnu-linux-x86_64-4.0.3_de.tar.xz
tar (child): tor-browser-gnu-linux-x86_64-4.0.3_de.tar.xz: The open ended with error: No such file or directory
tar (child): Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error is not recoverable: exiting now
And so with all the downloaded files: tar.gz and tar.xz!!! The same result of such actions is happening with other files: jdk-8u31-linux-x64.tar.gz, install_flash_player_11_linux.x86_64.tar.gz, Adwaita-Cupertino-G34.tar.gz, 165894-Zorba-black.tar.gz and others in this format.
My main question is: CAN, all of these files must be installed in the root directory? And only then do they decompress in a directory for the same – root?
I put out all the action on behalf of the Administrator: sudo su. Tell me – what is my fault ?! In addition to a clean installation of individual programs – everything else that was described in your article, did not work!
I ended up out of nowhere and decided to try to find an answer to mapabout IN RUSSIAN. They have, in Russian, that you describe the whole year – put 5 sekunt, and everything works! Following their advice and recommendations on the Russian forums, I began to understand the Kali much faster and easier! Why in your articles so all is not clear ??? Maybe this is a Google-translated? My native language is German. Machine translation and online in a browser so corrupts the truth ?! I do think that your instructions first translated into the language of abborigens Australia, then – the Jewish, and only then – in English, because that is how they are presented to management – can be understood only couple in love orangutans, at the time of their wedding coverings!!!
tar -xvJf tor-browser-gnu-linux-x86_64-4.0.3_de.tar.xz
this should work
root@kali:~/debian-packages/tor-0.2.4.24# debuild -rfakeroot -uc -us dpkg-buildpackage -rfakeroot -D -us -uc
dpkg-buildpackage: warning: using a gain-root-command while being root
dpkg-buildpackage: source package tor
dpkg-buildpackage: source version 0.2.4.24-1
dpkg-buildpackage: source changed by Peter Palfrader
dpkg-source –before-build tor-0.2.4.24
dpkg-buildpackage: host architecture i386
dpkg-checkbuilddeps: Unmet build dependencies: quilt libssl-dev libevent-dev (>= 1.1) asciidoc (>= 8.2) docbook-xml docbook-xsl xmlto dh-apparmor
dpkg-buildpackage: warning: build dependencies/conflicts unsatisfied; aborting
dpkg-buildpackage: warning: (Use -d flag to override.)
debuild: fatal error at line 1357:
dpkg-buildpackage -rfakeroot -D -us -uc failed
—
i have this error -_-
Ok, I think I am having the same issue that Sebastian was (with installing the TOR Bundle, he seems to have other issues beyond that). Here is Kali gives me:
root@kali:~/Desktop# tar -xvzf tor-browser-gnu-linux-i686-2.3.25-15-dev-LANG.tar.gz
tar (child): tor-browser-gnu-linux-i686-2.3.25-15-dev-LANG.tar.gz: Cannot open: No such file or directory
tar (child): Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error is not recoverable: exiting now
The package is on my desktop, I downloaded it straight from teh TOR website, would you happen to know how I can fix this?
Greatly appreciated.
cd Desktop
Lang change to language u download for example en-US
it gives me the same error even after i put in cd Desktop and changed Lang to en-US
tar -xvJf tor-browser-gnu-linux-x86_64-4.0.3_de.tar.xz
this should work
Hello I attemptedmm what you proposed but this was the result I got:
root@kali:~# apt-get install tor
Reading package lists… Done
Building dependency tree
Reading state information… Done
tor is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 18 not upgraded.
root@kali:~# tar -xvzf tor-browser-gnu-linux-i686-2.3.25-15-dev-en-US.tar.gz
tar (child): tor-browser-gnu-linux-i686-2.3.25-15-dev-en-US.tar.gz: Cannot open: No such file or directory
tar (child): Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error is not recoverable: exiting now
you have to extract the archive and run the set-up. Peeps skipped that step that’s what throws the “child” error
how ? sry im new to this
Where is these lines, there’s no such lines into this file.
Don’t start this as root, it’s a horrible idea. Instead make a new user
root@kali:~# useradd fuckboy
root@kali:~# chown -R fuckboy tor-browser_en-US # Replace with your TBB folder
root@kali:~# gksu -u fuckboy tor-browser_en-US/Browser/start-tor-browser
And it will run, not as root.
adding non-kali repositories to kali can crashed you system. Why are you recommend add this ?
Unable to install tor because of following error
root@Abhi:~# apt-get install tor
Reading package lists… Done
Building dependency tree
Reading state information… Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
tor : Depends: libssl1.0.0 (>= 1.0.1) but it is not installable
E: Unable to correct problems, you have held broken packages.
try to use option 2, i get this when i reach the step to type “apt-get install tor”
The following packages have unmet dependencies:
tor : Depends: libssl1.0.0 (>= 1.0.1) but it is not installable
Recommends: tor-geoipdb but it is not going to be installed
Recommends: torsocks but it is not installable
E: Unable to correct problems, you have held broken packages.
ok so im on kali 2.0 and this is what happens right after i type apt-get install TOR using the second install method. I am also new to kali but its a must have as is Tor.
Reading package lists… Done
Building dependency tree
Reading state information… Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
tor : Depends: libssl1.0.0 (>= 1.0.1) but it is not installable
Recommends: tor-geoipdb but it is not going to be installed
Recommends: torsocks but it is not installable
E: Unable to correct problems, you have held broken packages.
is this you? fight for freedom? its standard here :D
Hi blackMORE Ops,
Great tuts, I found a problem where I can’t add the gpg key
#gpg –keyserver keys.gnupg.net –recv 886DDD89
Kali gives me this”
gpg: keyserver receive failed: No keyserver available
I tried this
#gpg –keyserver keys.gnupg.net –recv A3C4F0F979CAA22CDBA8F512EE8CBC9E886DDD89
==> from torproject official page but it seems this also doesn’t work!! ==> it shows this:
gpg: keyserver receive failed: Server indicated a failure
what to do ?!!
very good,is very cool
When i say
tar -xvzf tar -xvzf tor-browser-gnu-linux-x86_64-2.3.25-16-dev-en-US.tar.gz
it says
tar: Multiple archive files require ‘-M’ option
Try ‘tar –help’ or ‘tar –usage’ for more information.
please help