linux/Centos下查看和修改网卡Mac地址(ifconfig命令)

来源:互联网 发布:nba本赛季数据 编辑:程序博客网 时间:2024/05/29 06:35

linux/Centos下查看网卡Mac地址,输入命令:

#ifconfig -a

eth0 Link encap:Ethernet HWaddr 00:e4:56:2E:D8:20

00:e4:56:2E:D8:20即是你的MAC地址。


linux/Centos下以root权限临时修改MAC地址:

1)闭网卡设备

  /sbin/ifconfig eth0 down

2)修改MAC地址

  /sbin/ifconfig eth0 hw ether MAC地址

3)重启网卡

  /sbin/ifconfig eth0 up

4)查看修改是否生效:

ifconfig eth0 | grep HWaddr

注意:上述修改MAC地址只是暂时的,系统重启后,系统会恢复原物理MAC地址。


Linux/Centos下如何永久修改网卡MAC地址


网上有很多关于linux下修改MAC地址的方法,经过测试,最终解决方法如下:

误区一:

#ifconfig eth0 down /*禁掉eth0网卡,这里以eth0网卡为例*/

#ifconfig eth0 hw ether 00:AA:BB:CC:DD:EE /*修改eth0网卡的MAC地址*/

#ifconfig eth0 up   /*重新启动eth0网卡*/

然后重新启动主机。

结论:按照这种方法修改MAC地址,重新启动主机系统后,MAC地址会自动还原。

误区二:

#ifconfig eth0 down

#cd /etc/sysconfig/network-scripts

#vi ifcfg-eth0

修改其中的"HWADDR=xx:xx:xx:xx:xx:xx"

#ifconfig eth0 up

#service network start

结论:按照这种方法修改MAC地址后将无法启用网络,会出现如下提示:

“Bringing up interface eth0: Device eth0 has different MAC address than expected,ignoring.”


在linux/Centos环境下将修改后的MAC地址永久保存的正确的步骤如下:

#ifconfig eth0 down

#cd /etc/sysconfig/network-scripts

#vi ifcfg-eth0

修改其中的"HWADDR=xx:xx:xx:xx:xx:xx"为"MACADDR=xx:xx:xx:xx:xx:xx"

#ifconfig eth0 up

#service network start

注意:关键词HWADDR和MACADDR是有区别的。


参考资料:http://www.169it.com/article/14360294838474691537.html

http://jingyan.baidu.com/article/8065f87fa4e5702331249837.html