蓝牙4.0详解
来源:互联网 发布:网络话费卡怎么用 编辑:程序博客网 时间:2024/06/05 15:07
关键术语和概念
- Generic Attribute Profile(GATT)—GATT配置文件是一个通用规范,用于在BLE链路上发送和接收被称为“属性”的数据块。目前所有的BLE应用都基于GATT。 蓝牙SIG规定了许多低功耗设备的配置文件。配置文件是设备如何在特定的应用程序中工作的规格说明。注意一个设备可以实现多个配置文件。例如,一个设备可能包括心率监测仪和电量检测。
- Attribute Protocol(ATT)—GATT在ATT协议基础上建立,也被称为GATT/ATT。ATT对在BLE设备上运行进行了优化,为此,它使用了尽可能少的字节。每个属性通过一个唯一的的统一标识符(UUID)来标识,每个String类型UUID使用128 bit标准格式。属性通过ATT被格式化为characteristics和services。
- Characteristic 一个characteristic包括一个单一变量和0-n个用来描述characteristic变量的descriptor,characteristic可以被认为是一个类型,类似于类。
- Descriptor Descriptor用来描述characteristic变量的属性。例如,一个descriptor可以规定一个可读的描述,或者一个characteristic变量可接受的范围,或者一个characteristic变量特定的测量单位。
- Service service是characteristic的集合。例如,你可能有一个叫“Heart Rate Monitor(心率监测仪)”的service,它包括了很多characteristics,如“heart rate measurement(心率测量)”等。你可以在bluetooth.org 找到一个目前支持的基于GATT的配置文件和服务列表。
角色和责任
以下是Android设备与BLE设备交互时的角色和责任:
- 中央 VS 外围设备。 适用于BLE连接本身。中央设备扫描,寻找广播;外围设备发出广播。
- GATT 服务端 VS GATT 客户端。决定了两个设备在建立连接后如何互相交流。
为了方便理解,想象你有一个Android手机和一个用于活动跟踪BLE设备,手机支持中央角色,活动跟踪器支持外围(为了建立BLE连接你需要注意两件事,只支持外围设备的两方或者只支持中央设备的两方不能互相通信)。
当手机和运动追踪器建立连接后,他们开始向另一方传输GATT数据。哪一方作为服务器取决于他们传输数据的种类。例如,如果运动追踪器想向手机报告传感器数据,运动追踪器是服务端。如果运动追踪器更新来自手机的数据,手机会作为服务端。
在这份文档的例子中,android app(运行在android设备上)作为GATT客户端。app从gatt服务端获得数据,gatt服务端即支持Heart Rate Profile(心率配置)的BLE心率监测仪。但是你可以自己设计android app去扮演GATT服务端角色。更多信息见BluetoothGattServer。
BLE权限
为了在app中使用蓝牙功能,必须声明蓝牙权限BLUETOOTH。利用这个权限去执行蓝牙通信,例如请求连接、接受连接、和传输数据。
如果想让你的app启动设备发现或操纵蓝牙设置,必须声明BLUETOOTH_ADMIN权限。注意:如果你使用BLUETOOTH_ADMIN权限,你也必须声明BLUETOOTH权限。
在你的app manifest文件中声明蓝牙权限。
12
<uses-permission android:name="android.permission.BLUETOOTH"/><uses-permission android:name="android.permission.BLUETOOTH_ADMIN"/>
如果想声明你的app只为具有BLE的设备提供,在manifest文件中包括:
1
<uses-feature android:name="android.hardware.bluetooth_le" android:required="true"/>
但是如果想让你的app提供给那些不支持BLE的设备,需要在manifest中包括上面代码并设置required="false"
,然后在运行时可以通过使用PackageManager.hasSystemFeature()
确定BLE的可用性。
12345
// 使用此检查确定BLE是否支持在设备上,然后你可以有选择性禁用BLE相关的功能if (!getPackageManager().hasSystemFeature(PackageManager.FEATURE_BLUETOOTH_LE)) { Toast.makeText(this, R.string.ble_not_supported, Toast.LENGTH_SHORT).show(); finish();}
设置BLE
你的app能与BLE通信之前,你需要确认设备是否支持BLE,如果支持,确认已经启用。注意如果<uses-feature.../>
设置为false,这个检查才是必需的。
如果不支持BLE,那么你应该适当地禁用部分BLE功能。如果支持BLE但被禁用,你可以无需离开应用程序而要求用户启动蓝牙。使用BluetoothAdapter两步完成该设置。
获取 BluetoothAdapter
所有的蓝牙活动都需要蓝牙适配器。BluetoothAdapter代表设备本身的蓝牙适配器(蓝牙无线)。整个系统只有一个蓝牙适配器,而且你的app使用它与系统交互。下面的代码片段显示了如何得到适配器。注意该方法使用getSystemService()]返回BluetoothManager,然后将其用于获取适配器的一个实例。Android 4.3(API 18)引入BluetoothManager。
1234
// 初始化蓝牙适配器final BluetoothManager bluetoothManager = (BluetoothManager) getSystemService(Context.BLUETOOTH_SERVICE);mBluetoothAdapter = bluetoothManager.getAdapter();
开启蓝牙
接下来,你需要确认蓝牙是否开启。调用isEnabled())去检测蓝牙当前是否开启。如果该方法返回
false
,蓝牙被禁用。下面的代码检查蓝牙是否开启,如果没有开启,将显示错误提示用户去设置开启蓝牙。12345
// 确保蓝牙在设备上可以开启if (mBluetoothAdapter == null || !mBluetoothAdapter.isEnabled()) { Intent enableBtIntent = new Intent(BluetoothAdapter.ACTION_REQUEST_ENABLE); startActivityForResult(enableBtIntent, REQUEST_ENABLE_BT);}
发现BLE设备
为了发现BLE设备,使用startLeScan())方法。这个方法需要一个参数BluetoothAdapter.LeScanCallback。你必须实现它的回调函数,那就是返回的扫描结果。因为扫描非常消耗电量,你应当遵守以下准则:
- 只要找到所需的设备,停止扫描。
- 不要在循环里扫描,并且对扫描设置时间限制。以前可用的设备可能已经移出范围,继续扫描消耗电池电量。
下面代码显示了如何开始和停止一个扫描:
12345678910111213141516171819202122232425262728293031323334
/** * 扫描和显示可以提供的蓝牙设备. */public class DeviceScanActivity extends ListActivity { private BluetoothAdapter mBluetoothAdapter; private boolean mScanning; private Handler mHandler; // 10秒后停止寻找. private static final long SCAN_PERIOD = 10000; ... private void scanLeDevice(final boolean enable) { if (enable) { // 经过预定扫描期后停止扫描 mHandler.postDelayed(new Runnable() { @Override public void run() { mScanning = false; mBluetoothAdapter.stopLeScan(mLeScanCallback); } }, SCAN_PERIOD);
mScanning = true; mBluetoothAdapter.startLeScan(mLeScanCallback); } else { mScanning = false; mBluetoothAdapter.stopLeScan(mLeScanCallback); } ... }...}
如果你只想扫描指定类型的外围设备,可以改为调用startLeScan(UUID[], BluetoothAdapter.LeScanCallback)),需要提供你的app支持的GATT services的UUID对象数组。
作为BLE扫描结果的接口,下面是BluetoothAdapter.LeScanCallback的实现。
123456789101112131415161718
private LeDeviceListAdapter mLeDeviceListAdapter;...// Device scan callback.private BluetoothAdapter.LeScanCallback mLeScanCallback = new BluetoothAdapter.LeScanCallback() { @Override public void onLeScan(final BluetoothDevice device, int rssi, byte[] scanRecord) { runOnUiThread(new Runnable() { @Override public void run() { mLeDeviceListAdapter.addDevice(device); mLeDeviceListAdapter.notifyDataSetChanged(); } }); }};
注意:只能扫描BLE设备或者扫描传统蓝牙设备,不能同时扫描BLE和传统蓝牙设备。
连接到GATT服务端
与一个BLE设备交互的第一步就是连接它——更具体的,连接到BLE设备上的GATT服务端。为了连接到BLE设备上的GATT服务端,需要使用connectGatt( )方法。这个方法需要三个参数:一个Context对象,自动连接(boolean值,表示只要BLE设备可用是否自动连接到它),和BluetoothGattCallback调用。
1
mBluetoothGatt = device.connectGatt(this, false, mGattCallback);
连接到GATT服务端时,由BLE设备做主机,并返回一个BluetoothGatt实例,然后你可以使用这个实例来进行GATT客户端操作。请求方(Android app)是GATT客户端。BluetoothGattCallback用于传递结果给用户,例如连接状态,以及任何进一步GATT客户端操作。
在这个例子中,这个BLE APP提供了一个activity(DeviceControlActivity)来连接,显示数据,显示该设备支持的GATT services和characteristics。根据用户的输入,这个activity与BluetoothLeService通信,通过Android BLE API实现与BLE设备交互。
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475
//通过BLE API服务端与BLE设备交互public class BluetoothLeService extends Service { private final static String TAG = BluetoothLeService.class.getSimpleName(); private BluetoothManager mBluetoothManager; //蓝牙管理器 private BluetoothAdapter mBluetoothAdapter; //蓝牙适配器 private String mBluetoothDeviceAddress; //蓝牙设备地址 private BluetoothGatt mBluetoothGatt; private int mConnectionState = STATE_DISCONNECTED; private static final int STATE_DISCONNECTED = 0; //设备无法连接 private static final int STATE_CONNECTING = 1; //设备正在连接状态 private static final int STATE_CONNECTED = 2; //设备连接完毕 public final static String ACTION_GATT_CONNECTED = "com.example.bluetooth.le.ACTION_GATT_CONNECTED"; public final static String ACTION_GATT_DISCONNECTED = "com.example.bluetooth.le.ACTION_GATT_DISCONNECTED"; public final static String ACTION_GATT_SERVICES_DISCOVERED = "com.example.bluetooth.le.ACTION_GATT_SERVICES_DISCOVERED"; public final static String ACTION_DATA_AVAILABLE = "com.example.bluetooth.le.ACTION_DATA_AVAILABLE"; public final static String EXTRA_DATA = "com.example.bluetooth.le.EXTRA_DATA"; public final static UUID UUID_HEART_RATE_MEASUREMENT = UUID.fromString(SampleGattAttributes.HEART_RATE_MEASUREMENT); //通过BLE API的不同类型的回调方法 private final BluetoothGattCallback mGattCallback = new BluetoothGattCallback() { @Override public void onConnectionStateChange(BluetoothGatt gatt, int status, int newState) {//当连接状态发生改变 String intentAction; if (newState == BluetoothProfile.STATE_CONNECTED) {//当蓝牙设备已经连接 intentAction = ACTION_GATT_CONNECTED; mConnectionState = STATE_CONNECTED; broadcastUpdate(intentAction); Log.i(TAG, "Connected to GATT server."); Log.i(TAG, "Attempting to start service discovery:" + mBluetoothGatt.discoverServices()); } else if (newState == BluetoothProfile.STATE_DISCONNECTED) {//当设备无法连接 intentAction = ACTION_GATT_DISCONNECTED; mConnectionState = STATE_DISCONNECTED; Log.i(TAG, "Disconnected from GATT server."); broadcastUpdate(intentAction); } } @Override // 发现新服务端 public void onServicesDiscovered(BluetoothGatt gatt, int status) { if (status == BluetoothGatt.GATT_SUCCESS) { broadcastUpdate(ACTION_GATT_SERVICES_DISCOVERED); } else { Log.w(TAG, "onServicesDiscovered received: " + status); } } @Override // 读写特性 public void onCharacteristicRead(BluetoothGatt gatt, BluetoothGattCharacteristic characteristic, int status) { if (status == BluetoothGatt.GATT_SUCCESS) {
broadcastUpdate(ACTION_DATA_AVAILABLE, characteristic); } } ... };...}
当一个特定的回调被触发的时候,它会调用相应的broadcastUpdate()辅助方法并且传递给它一个action。注意在该部分中的数据解析按照蓝牙心率测量配置文件规格进行。
12345678910111213141516171819202122232425262728293031323334353637
private void broadcastUpdate(final String action) { final Intent intent = new Intent(action); sendBroadcast(intent);}private void broadcastUpdate(final String action, final BluetoothGattCharacteristic characteristic) { final Intent intent = new Intent(action); // 这是心率测量配置文件。 if (UUID_HEART_RATE_MEASUREMENT.equals(characteristic.getUuid())) { int flag = characteristic.getProperties(); int format = -1; if ((flag & x01) != 0) { format = BluetoothGattCharacteristic.FORMAT_UINT16; Log.d(TAG, "Heart rate format UINT16."); } else { format = BluetoothGattCharacteristic.FORMAT_UINT8; Log.d(TAG, "Heart rate format UINT8."); } final int heartRate = characteristic.getIntValue(format, 1); Log.d(TAG, String.format("Received heart rate: %d", heartRate)); intent.putExtra(EXTRA_DATA, String.valueOf(heartRate)); } else { // 对于所有其他的配置文件,用十六进制格式写数据 final byte[] data = characteristic.getValue(); if (data != null && data.length > 0) { final StringBuilder stringBuilder = new StringBuilder(data.length); for(byte byteChar : data) stringBuilder.append(String.format("%02X ", byteChar)); intent.putExtra(EXTRA_DATA, new String(data) + "\n" + stringBuilder.toString()); } } sendBroadcast(intent);}
返回DeviceControlActivity, 这些事件由一个BroadcastReceiver来处理:
// 通过服务控制不同的事件// ACTION_GATT_CONNECTED: 连接到GATT服务端// ACTION_GATT_DISCONNECTED: 未连接GATT服务端.// ACTION_GATT_SERVICES_DISCOVERED: 未发现GATT服务.// ACTION_DATA_AVAILABLE: 接受来自设备的数据,可以通过读或通知操作获得。private final BroadcastReceiver mGattUpdateReceiver = new BroadcastReceiver() { @Override public void onReceive(Context context, Intent intent) { final String action = intent.getAction(); if (BluetoothLeService.ACTION_GATT_CONNECTED.equals(action)) { mConnected = true; updateConnectionState(R.string.connected); invalidateOptionsMenu(); } else if (BluetoothLeService.ACTION_GATT_DISCONNECTED.equals(action)) { mConnected = false; updateConnectionState(R.string.disconnected); invalidateOptionsMenu(); clearUI(); } else if (BluetoothLeService. ACTION_GATT_SERVICES_DISCOVERED.equals(action)) { // 在用户接口上展示所有的services and characteristics displayGattServices(mBluetoothLeService.getSupportedGattServices()); } else if (BluetoothLeService.ACTION_DATA_AVAILABLE.equals(action)) { displayData(intent.getStringExtra(BluetoothLeService.EXTRA_DATA)); } }};
读取BLE变量
你的android app完成与GATT服务端连接和发现services后,就可以读写支持的属性。例如,这段代码通过服务端的services和 characteristics迭代,并且将它们显示在UI上。
public class DeviceControlActivity extends Activity { ... // 演示如何遍历支持GATT Services/Characteristics // 这个例子中,我们填充绑定到UI的ExpandableListView上的数据结构 private void displayGattServices(List<BluetoothGattService> gattServices) { if (gattServices == null) return; String uuid = null; String unknownServiceString = getResources(). getString(R.string.unknown_service); String unknownCharaString = getResources(). getString(R.string.unknown_characteristic); ArrayList<HashMap<String, String>> gattServiceData = new ArrayList<HashMap<String, String>>(); ArrayList<ArrayList<HashMap<String, String>>> gattCharacteristicData = new ArrayList<ArrayList<HashMap<String, String>>>(); mGattCharacteristics = new ArrayList<ArrayList<BluetoothGattCharacteristic>>(); // 循环可用的GATT Services. for (BluetoothGattService gattService : gattServices) { HashMap<String, String> currentServiceData = new HashMap<String, String>(); uuid = gattService.getUuid().toString(); currentServiceData.put( LIST_NAME, SampleGattAttributes. lookup(uuid, unknownServiceString)); currentServiceData.put(LIST_UUID, uuid); gattServiceData.add(currentServiceData); ArrayList<HashMap<String, String>> gattCharacteristicGroupData = new ArrayList<HashMap<String, String>>(); List<BluetoothGattCharacteristic> gattCharacteristics = gattService.getCharacteristics(); ArrayList<BluetoothGattCharacteristic> charas = new ArrayList<BluetoothGattCharacteristic>(); // 循环可用的Characteristics. for (BluetoothGattCharacteristic gattCharacteristic : gattCharacteristics) { charas.add(gattCharacteristic); HashMap<String, String> currentCharaData = new HashMap<String, String>(); uuid = gattCharacteristic.getUuid().toString(); currentCharaData.put( LIST_NAME, SampleGattAttributes.lookup(uuid, unknownCharaString)); currentCharaData.put(LIST_UUID, uuid);
gattCharacteristicGroupData.add(currentCharaData); } mGattCharacteristics.add(charas); gattCharacteristicData.add(gattCharacteristicGroupData); } ... }...}
接收GATT通知
当设备上的特性改变时会通知BLE应用程序。这段代码显示了如何使用setCharacteristicNotification( )给一个特性设置通知。
1234567891011
private BluetoothGatt mBluetoothGatt;BluetoothGattCharacteristic characteristic;boolean enabled;...mBluetoothGatt.setCharacteristicNotification(characteristic, enabled);...BluetoothGattDescriptor descriptor = characteristic.getDescriptor( UUID.fromString(SampleGattAttributes.CLIENT_CHARACTERISTIC_CONFIG));descriptor.setValue(BluetoothGattDescriptor.ENABLE_NOTIFICATION_VALUE);mBluetoothGatt.writeDescriptor(descriptor);
如果对一个特性启用通知,当远程蓝牙设备特性发送变化,回调函数onCharacteristicChanged( ))被触发。
123456
@Override// 广播更新public void onCharacteristicChanged(BluetoothGatt gatt, BluetoothGattCharacteristic characteristic) { broadcastUpdate(ACTION_DATA_AVAILABLE, characteristic);}
关闭客户端App
当你的app完成BLE设备的使用后,应该调用close( )),系统可以合理释放占用资源。
1234567
public void close() { if (mBluetoothGatt == null) { return; } mBluetoothGatt.close(); mBluetoothGatt = null;}
- 蓝牙4.0详解
- 蓝牙4.0详解
- Android Bluetooth 蓝牙4.0 详解
- Android BLE蓝牙4.0开发详解
- Android BLE蓝牙4.0开发详解
- 蓝牙4.0 BLE协议结构图详解
- iOS开发之蓝牙4.0技术(详解)
- 蓝牙4.0BLE中协议栈详解
- Android BLE蓝牙4.0开发详解
- 蓝牙协议栈详解
- android 蓝牙 详解
- BluetoothDevice蓝牙类详解
- Android蓝牙通信详解
- Android蓝牙通信详解
- Android蓝牙开发详解
- 蓝牙的状态详解
- Android-蓝牙详解【占坑中】
- Android 蓝牙广播详解
- User Guide:eccrypto.h学习笔记(翻译)
- leetcode[Longest Substring Without Repeating Characters]//待整理多种解法
- JavaScript的跨域访问问题
- 4、python面向对象之多态
- B-Tree、B+Tree、红黑树、B*Tree数据结构
- 蓝牙4.0详解
- bat加密及解密方法
- linux程序开机自启动顺序
- Writing A Threadpool in Rus
- Demo_JDBC_实现一个用户登陆的功能并改进sql的注入问题
- 连分数分解法寻找整数的因子(Python)
- 5.win32网络编程(一)
- 文章标题
- 关于RStudio出现中文乱码问题的解决