MSM USB插入流程代码分析
来源:互联网 发布:js取消页面滚动条 编辑:程序博客网 时间:2024/06/03 16:37
代码路径:kernel\msm-3.18\drivers\power\qpnp-smbcharger.c
src_detect_handler-->update_usb_status(chip, usb_present, 0); -->handle_usb_insertion(chip); read_usb_type(chip, &usb_type_name, &usb_supply_type);//读寄存器获得充电器类型 smbchg_change_usb_supply_type(chip, usb_supply_type);//根据充电器类型设置输入电流门限,下面单独分析 power_supply_set_present(chip->usb_psy, chip->usb_present);//设置usb在位的属性 schedule_work(&chip->usb_set_online_work);//调度USB online工作队列if (!chip->hvdcp_not_supported &&(usb_supply_type == POWER_SUPPLY_TYPE_USB_DCP)) {//如果芯片支持快充且充电器类型为DCP,则启动HVDCP检测,其中 PMI8937/PMI8940 不支持HVDCP smbchg_stay_awake(chip, PM_DETECT_HVDCP); schedule_delayed_work(&chip->hvdcp_det_work,msecs_to_jiffies(HVDCP_NOTIFY_MS)); } smbchg_detect_parallel_charger(chip);//并充相关检测read_usb_type-->smbchg_read(chip, ®, chip->misc_base + IDEV_STS, 1);//读寄存器1608获得类型type = get_type(reg);//获得相应的bit位的值*usb_type_name = get_usb_type_name(type);//获得类型名*usb_supply_type = get_usb_supply_type(type);//获得类型type
Bit7位1,充电器类型为CDP
Bit6位1,充电器类型为DCP,即通常说的AC adapter
Bit5位1,充电器类型为other,可以认为是非标充电器?
Bit4位1,充电器类型为SDP
get_usb_type_name(type)-->return usb_type_str[type];static char *usb_type_str[] = { "SDP", /* bit 0 */ 对应上面寄存器的Bit4 "OTHER", /* bit 1 */ 对应上面寄存器的Bit5 "DCP", /* bit 2 */ 对应上面寄存器的Bit6 "CDP", /* bit 3 */ 对应上面寄存器的Bit7 "NONE", /* bit 4 error case */};/* helper to return enum power_supply_type of USB type */get_usb_supply_type(int type)return usb_type_enum[type];static enum power_supply_type usb_type_enum[] = { POWER_SUPPLY_TYPE_USB, /* bit 0 */ POWER_SUPPLY_TYPE_USB_DCP, /* bit 2 */这里将other统一处理成了DCP类型 POWER_SUPPLY_TYPE_USB_CDP, /* bit 3 */ POWER_SUPPLY_TYPE_USB_DCP, /* bit 4 error case, report DCP */};
输入端限流设置代码流程
代码路径:/kernel/msm-3.18/drivers/power/qpnp_smbcharger.c
handle_usb_insertion-->smbchg_change_usb_supply_type(chip, usb_supply_type); -->rc = vote(chip->usb_icl_votable, PSY_ICL_VOTER, true,current_limit_ma);//投票机制实际是调用他的毁掉函数 -->set_usb_current_limit_vote_cb(struct device *dev,int icl_ma,int client,int last_icl_ma,int last_client) -->rc = smbchg_set_usb_current_max(chip, icl_ma);switch (chip->usb_supply_type) {//根据充电器配置最大电流 case POWER_SUPPLY_TYPE_USB:case POWER_SUPPLY_TYPE_USB_CDP:default: rc = smbchg_set_high_usb_chg_current(chip, current_ma);//dcp类型默认走这个default设置smbchg_set_high_usb_chg_current(struct smbchg_chip *chip,int current_ma) i = find_smaller_in_array(chip->tables.usb_ilim_ma_table,current_ma, chip->tables.usb_ilim_ma_len);//该函数返回数组中最接近设定值的数值/* finds the index of the closest smaller value in the array. */if (i < 0) { dev_err(chip->dev,"Cannot find %dma current_table using %d\n",current_ma, CURRENT_150_MA);}//如果找不到就设置150mausb_cur_val = i & USBIN_INPUT_MASK;rc = smbchg_sec_masked_write(chip, chip->usb_chgpth_base + IL_CFG,USBIN_INPUT_MASK, usb_cur_val);//设置寄存器13f2
阅读全文
0 0
- MSM USB插入流程代码分析
- USB驱动程序代码分析——检测设备插入拔出
- linux USB流程分析
- USB代码分析和学习心得之初始化流程以及读写流程
- USB内核代码分析
- Usb Hub代码分析
- MSM8X60 USB控制器流程分析
- usb serial驱动流程分析
- MSM LK启动流程初探
- 插入排序 代码分析
- Sensor 代码流程分析
- Sensor 代码流程分析
- Unreal 代码流程分析
- 代码流程分析
- openRTSP 代码流程分析
- Sensor 代码流程分析
- USB驱动Suspend&Resume 调用流程分析
- USB设备Firmware基本流程分析
- JDBC传统连接示例—Java
- AndroidStudio安装和错误解决
- Linux下安装和运行Wireshark
- EasyNVR H5无插件摄像机直播解决方案前端解析之:videojs的使用
- 【run manually if necessary】问题解决办法
- MSM USB插入流程代码分析
- 4.验证码手动处理
- 谈谈对Application类的理解
- 五、C++ STL一些总结
- Retrofit源码分析 (一.基础知识annotation认识)
- react-native android编译报错
- Spring和SpringMvc、Struts2比较
- JS概述
- 设计模式-享元模式