Python101
来源:互联网 发布:linux中cp命令 编辑:程序博客网 时间:2024/06/03 17:00
Python101
- 单双引号不分
- 命名区分大小写
- BIF buildInFunction 内置函数 dir()
- 注释 “”“explain here”“”
- import sys; sys.path 查看py模块
- python3 idle窗口运行
- python 主命名空间 main
- ()数据为元组,tupe,不可变数据,[]为可变数据
- 缩进来写代码块,必须严格执行
- 数组读取 a[0:3]
列表
列表CRUD
- 高层集合 可以混合各种数据
- 列表类似于数组,不需要刻意声明数据类型
创建列表 cast = ["a",'b','c']
print(len(cast))
cast[1]
.append('a')
末尾加一 .extend('a','b')
末尾加多 .pop()
提取末尾 .remove('a')
删指定 .insert(0,'a')
插入指定index,后续index值向后移
迭代 for…in…
for item in items: print(item)
while … :
等同于上迭代
count=0while count < len(cast): print(cast[count]) count = count+1
列表嵌套
- 列表内可以随意嵌套
创建3层迭代
movie = ['a',1,'b',2,'c',3,['a1','a2',['b1','b2']]]
print(movie[6][2][1]) //b2
- 用
for-in
会只迭代第一层
for item in movie: print (item)//a...3['a1', 'a2', ['b1', 'b2']]
- 迭代3层,用
if:...else:
和isinstance(a,list)
检测是否含有子列表。
isinstance(item,list)
检测类型,内置BIF,list为类型
for item in movie: //检测第一层 if isinstance(item,list): //第二层 for item_0 in item: if isinstance(item_0,list): //第三层 for item_1 in item_0: print (item_1) else: print(item_0) else: print (item)
def
创建函数
如果检测到item为list,则调用这身函数
def loop(the_list): for item in the_list: if isinstance(item,list): loop(item) else: print(item)
print_loop 接受列表,以及通过空格显示列表层数,默认设置为false
def print_loop(the_list, indent=false, level=0) for item in the_list: if isinstance(item, list): print_loop(item, indent, level+1) else: if indent: for tab in range(level): print("\t", end="") //end="" 后面加个空格 print(item)
运行py代码,py模块的创建和导入
把函数写在.py的文件中,为模块。
在idle中两种导入方式:
- 通过现成路径中导入
import sys; sys.path
查看目前路径,并在在路径中添加hello.py
import hello
导入hello.loop(movie)
使用函数,
引入模块
以hello.loop(...)
引用函数
或者import loop from hello
引入到当前命名空间
- 打包发布 distribution
创建hello文件夹,添加 hello.py
, setup.py
在hello文件下,终端运行: python3 setup.py sdist
构建发布文件 sudo python3 setup.py install
将发布安装到python本地副本中 import hello
导入
安装后目录结构 p69
hello
|
|__manifest //包含文件列表
|
|__build
| |__llb
| |__hello.py //代码
|__dist
| |__apple-1.0.0.tar.gz //发布包
|
|__apple.py //代码
|
|__apple.pyc //‘编译’版本的代码
|
|__setup.py //元数据
上传到PyPl
数据读写
python读取机制
读取txt文件 打印
import osos.getcwd() //当前目录os.chdir('../a/b') //切换目录data = open('sketch.txt') //打开print(data.readline(), end="") //打印单行data.seek(0) //指针会到起点for item in data: print(data, end="") //打印每一行data.close() //关闭
分解数据 find split
find(:)==-1
查找 (role,words) = item.split(":",1)
split分开,两部分
role = []words = []try: data = open('sketch.txt') for each_line in data: try: //if not each_line find(':') == -1: (role, words) = each_line.split(":",1) //返回不可变数据 print(role) print('said:said',end="") print(words) except ValueError pass data.close()except IOError: print('data has been missing')...
写入模式,访问模式
open("date.out",w)
, 写,清空文件,或者新建。 ..., w+
打开文件读写,或者新建。
把保存放在finally:
,确保一定会保存,否则try中出现错误,数据丢失。 print(role, file=man_file)
把数据写入
- 使用
try/except/finally
模式
...try: man_file = open('man_data.txt',w) //w读取模式,新建文件 other_file = open('other_data.txt',w) print(role, file = man_file) //用print写入数据 print(words, file = other_file)except IOError as err: print('File error:' + str(err)) //详细定制错误,把IOError转化为str字符串,打印finally: man_file.close() //close 关闭保存 other_file.close()
if 'data' in locals():
用locals
检查当前作用域中的所有名
- 或者
with
模式,替代手动关闭open/clsoe
,with/as
context manager 自动在结尾管理对象
file = open('foo.txt') ...close(file)
with open('foo.txt') as file: ...
try: with open('man_data.txt',w) as man_file, open('other_data.txt',w): as other_file: print(role, file=man_file) print(words, file = other_file)
函数中添加文件保存
引入sys.stdout
模块,保存为标准输出
def print_lol(the_list, indent=False, level=0, fn=sys.stdout) for each_item in the_list: if isinstance(each_item, list): print_lol(each_item, indent, level+1, fn) else: if indent: for tab_stop in range(level): print("\t", end="", file=fn) print(each_item, file=fn)
pickle内置数据库 dump/load
内部保存数据,二进制模式:'wb','rb'
dump
和load
读取存储
import picklea_list = [] ... with open ('mydata.pickle', 'wb') as mysavedata: //二进制写入wb模式打开 pickle.dump([1,2,'three'], mysavedata) //pickle.dump储存 with open ('mydata.pickle', 'rb') as myrestoredata: //二进制读取rb模式打开 a_list = pickle.load(myrestoredata) //pickle.load读取print a_list
处理数据
data.strip().split(',')
方法串链 method chaining 左到右
- 先strip()
把数据空白去掉
- 在split(',')
进行分割
print(sotred(james))
函数串链 funciton chaining 右到左
数据处理函数
sort()
原地排序 sorted()
创建副本 排序
推导列表 list comprehension 减少列表a到列表b的转换
name= [ interation for item in items] p181
mins = [1,2,3]secs = [ m*60 for m in mins]
clean_mikey=[]for each_t in mikey: clean_mikey.append(sanitize(each_t))
简写成 clean_mikey = [sanitize(each_t) for each_t in mikey]
集合 不允许重复值
set()
print(sorted(set([sanitize(t) for t in sarh]))[0:3])
输出前3,集合去重
字典 key/value
cless={}
或者 pain = dict()
定义类 class
使用class创建对象, 包含__init__
特殊方法,如何初始化对象 self
用于分辨对象 Athlete().__init__(a)
class Athlete: def __init__(self, a_name, a_dot=None, a_time=[]): self.name = a_name self.dob = a_dob self.times = a_times def how_bif(self)
json格式
import json names = ['a','b',['asd','ads'],'d'] to_transfer = json.dump(names) //将列表转化为json from_transfer = json.load(to_transfer) //将json转化为列表
数据库 内置sqlite3数据库管理系统
import sqlite3 connection = sqlite3.connect('test.sqlite') //建立连接 cursor = connection.cursor //创建游标 cursor.execute("""SELECT DATA('now')""") //操作 connection.commit() //执行 关闭 connection.close()