ffmpeg 新老接口问题及对照集锦
来源:互联网 发布:淘宝正版手办店 编辑:程序博客网 时间:2024/05/22 01:31
ffmpeg源码包里面有个apichangs文档,里面有各种接口改变的记录,如果你发现接口不能用了,可以去搜索那个文档,可以找到对应的新接口,然后到新接口对应的头文件中找到说明文字
网上很多关于ffmpeg (libav)的资料都是N年以前的,而事实上ffmpeg数年来一直在“以时俱进”,因此无论是一些新手,或者号称为老手的人,有时候难免出头痛。。。。。。
为了解决大家的头痛的问题,特列一个贴子,把ffmpeg相关的一些常见的、版本的问题列举出来,供大家参考,同时也请大家一起补充。
1) 不认识guess_format.
解决: #define guess_format av_guess_format
接口不变。
2) 不认识av_alloc_format_context
解决: #define av_alloc_format_context avformat_alloc_output_context
接口调整。
3) 不认识CODEC_TYPE_VIDEO 和 CODEC_TYPE_AUDIO
解决:
#define CODEC_TYPE_VIDEO AVMEDIA_TYPE_VIDEO
#define CODEC_TYPE_AUDIO AVMEDIA_TYPE_AUDIO
4) 不认识audio_resample_init
解决:#define audio_resample_init av_audio_resample_init
接口调整。
5) avcodec_decode_video 到 avcodec_decode_video2接口调整
旧代码:
len = avcodec_decode_video(c, (short *)outbuf, &out_size, inbuf_ptr, size);
新代码:
av_init_packet(&pkt); pkt.data = (unsigned char*)inbuf_ptr; pkt.size = size; len = avcodec_decode_video2(c, &tmpFrame, &got_picture, &pkt);
av_open_input_file
/opt/workspace/android/EasyPlayer/jni/EasyPlayer/EasyPlayer.cpp:483: warning: ‘int av_open_input_file(AVFormatContext**, const char*, AVInputFormat*, int, AVFormatParameters*)’ is deprecated (declared at /opt/workspace/android/EasyPlayer/jni/EasyPlayer/../include/libavformat/avformat.h:1480)
新接口:
#ifdef _FFMPEG_0_6__ if(av_open_input_file(&ffmpeg_fields.pFormatCtx, _filePath, NULL, 0, NULL) != 0) #else if (avformat_open_input(&ffmpeg_fields.pFormatCtx, _filePath, NULL, NULL) != 0) #endif
av_find_stream_info
/opt/workspace/android/EasyPlayer/jni/EasyPlayer/EasyPlayer.cpp:494: warning: ‘int av_find_stream_info(AVFormatContext*)’ is deprecated (declared at /opt/workspace/android/EasyPlayer/jni/EasyPlayer/../include/libavformat/avformat.h:1526)
新接口:
#ifdef _FFMPEG_0_6__ if(av_find_stream_info(ffmpeg_fields.pFormatCtx) < 0) #else if (avformat_find_stream_info(ffmpeg_fields.pFormatCtx, NULL) < 0) #endif
av_close_input_file
/opt/workspace/android/EasyPlayer/jni/EasyPlayer/EasyPlayer.cpp:522: warning: ‘void av_close_input_file(AVFormatContext*)’ is deprecated (declared at /opt/workspace/android/EasyPlayer/jni/EasyPlayer/../include/libavformat/avformat.h:1706)
新接口:
#ifdef _FFMPEG_0_6__ av_close_input_file(ffmpeg_fields.pFormatCtx);#else avformat_close_input(&ffmpeg_fields.pFormatCtx);#endif
复制代码
注意,这个是个2级指针。
avcodec_open2
新出来的avcodec_open2接口支持一些编解码特性的指定。
#ifdef __FFMPEG_0_6__ if (avcodec_open(ffmpeg_video.codec_ctx, ffmpeg_video.codec) < 0) #else if (avcodec_open2(ffmpeg_video.codec_ctx, ffmpeg_video.codec, NULL) < 0) #endifavcodec_init
/opt/workspace/android/EasyIPCam/jni/libeasycodec/EasyCodec.cpp:20: warning: ‘void avcodec_init()’ is deprecated (declared at /opt/workspace/android/EasyIPCam/jni/libeasycodec/../3rdparty/libavcodec/avcodec.h:3932)
这个function已经不再需要了,当你调用avcodec_register()或者 avcodec_register_all()时,ffmpeg会自动调用它。所以放心大胆的移除掉就可以了。
url_fclose url_fopen url_fseek等等
/opt/workspace/android/EasyIPCam/jni/libeasycodec/EasyCodec.cpp:67: warning: ‘int url_fclose(AVIOContext*)’ is deprecated (declared at /opt/workspace/android/EasyIPCam/jni/libeasycodec/../3rdparty/libavformat/avio.h:324)
这一系统的接口都只需要在前面加一个avio_的前缀就可以了,如:avio_close()。
avcodec_alloc_context()
/opt/workspace/android/EasyIPCam/jni/libeasycodec/EasyCodec.cpp:111: warning: ‘AVCodecContext* avcodec_alloc_context()’ is deprecated (declared at /opt/workspace/android/EasyIPCam/jni/libeasycodec/../3rdparty/libavcodec/avcodec.h:4025)
使用最新接口:avcodec_alloc_context3()
m_pACodec = avcodec_find_encoder((CodecID)nCodecID); if(!m_pACodec) return false; m_pAContext = avcodec_alloc_context3(m_pACodec);
av_get_bits_per_sample_format
/opt/workspace/android/EasyIPCam/jni/libeasycodec/EasyCodec.cpp:143: warning: ‘int av_get_bits_per_sample_format(AVSampleFormat)’ is deprecated (declared at /opt/workspace/android/EasyIPCam/jni/libeasycodec/../3rdparty/libavcodec/avcodec.h:4529)
新接口改为av_get_bytes_per_sample(反正音频bits per sample是8的倍数,不是8就是16,直接用byte比用bit更好)
audio_resample_init
/opt/workspace/android/EasyIPCam/jni/libeasycodec/EasyCodec.cpp:157: error: ‘audio_resample_init’ was not declared in this scope
新接口:av_audio_resample_init,原先我以为ffmpeg要支持超过2 channels的resample,后来一看resample.c里的实现,结果发现还是只能支持mono和stereo
多出来的几个参数,给填default值:
AV_SAMPLE_FMT_S16, AV_SAMPLE_FMT_S16, TAPS, 10, 0, 0.8
详见resample.c,或者参考RTSPPlayer中的easyffmpeg.cpp.
PKT_FLAG_KEY
没什么好说的,直接在前面加个AV_的前缀:AV_PKT_FLAG_KEY
av_alloc_format_context
/opt/workspace/android/EasyIPCam/jni/libeasycodec/EasyCodec.cpp:722: error: ‘av_alloc_format_context’ was not declared in this scope
这个前面两位同仁有提到不同,但不说怎么个不同法,实在可恨,我直接写个例子:
avformat_alloc_output_context2(&m_pFormatCtx, pOutputFmt, "avi", pFileName);
- ffmpeg 新老接口问题及对照集锦
- ffmpeg 新老接口问题及对照集锦
- ffmpeg 新老接口问题及对照集锦
- ffmpeg 新老接口问题及对照集锦
- ffmpeg 新老接口问题及对照集锦
- ffmpeg 新老接口问题及对照集锦
- ffmpeg 新老接口问题及对照集锦
- ffmpeg 新老接口问题及对照集锦
- ffmpeg 新老接口问题及对照集锦
- ffmpeg 新老接口问题及对照集锦
- ffmpeg 新老接口问题及对照集锦
- ffmpeg 新老接口问题及对照集锦
- ffmpeg 新老接口问题及对照集锦
- ffmpeg 新老接口问题及对照集锦
- ffmpeg 新老接口问题及对照集锦 .
- ffmpeg 新老接口问题及对照集锦
- ffmpeg 新老接口问题及对照集锦
- ffmpeg——新老接口问题及对照集锦
- OI赛第二场t1Last mile of the way
- WOJ-5 Holding Animals
- hbase运行时ERROR:org.apache.hadoop.hbase.PleaseHoldException:Master is initializing的解决方法
- 深度学习笔记(七) RNN循环神经网络
- CSS —(弹性布局)
- ffmpeg 新老接口问题及对照集锦
- WOJ1157-Easy to Count
- H5基础(1)-HTML5基础简介
- hdu 2476 String painter
- 开博有言
- 机器学习与python实战(一)-k近邻
- QNX系统MfgTool烧写工具脚本说明
- UVA 140 BandWidth
- ehcache.xml及结合shiro缓存的ehcache的配置文件