Redhat7安装VNC服务端和FTP服务端实现远程控制

VNC作为一种非常成熟使用方便的远程桌面系统，使用非常广泛

首先要注意在安装Redhat的时候要安装图形化界面GNU——KDE和FTP服务器

安装VNC的过程非常简单

1、首先将光盘放入光驱，观察光驱的挂载点，然后将本地的yum源指向光驱。

假设现在的光驱挂载点为 /run/media/alex/RHEL-7.2 Server.x86_64/，太长了所以我使用软连接把这个目录连接到了/opt/rhel下面（ln -s   /run/media/alex/RHEL-7.2\ Server.x86_64/  /opt/rhel），那么现在需要在/etc/yum.repos.d/目录下建立一个新文件，rhel-source.repo,内容如下。

[base]name=Red Hat Enterprise Linux $releasever - $basearch - Sourcebaseurl=file:///opt/rhelenabled=1gpgcheck=1gpgkey=file:///opt/rhel/RPM-GPG-KEY-redhat-release

这个文件就指明了一个名为“base”的yum源，它指向光盘（并非光盘里面的Packages文件夹），使用baseurl=file...这种方式可以指向本地的文件。同时这里也可以支持http或者ftp格式，可以在局域网内搭建yum源服务器。

同时gpg证书也指向光盘中的gpg证书。注意如果光盘不是自动挂载的，或者你只有一个.iso文件，那么也可以把这个.iso文件上传到Redhat服务器上，然后使用mount -o loop xxx.iso的方式进行挂载。

配置完成之后刷新一下yum

yum clean allyum update

如果配置的路径正确，那么此处会更新yum源，如果路径填写错误或者挂载出现问题，跑不了几行就会报ERROR

有了光盘的yum源之后再安装就轻而易举了，首先检查一下VNC是否被安装过了

rpm -qa vnc*

如果没有输出说明没有被安装过，那么我们现在就可以安装了

yum -y install vnc*

如果你之前yum配置的没有问题，那么此时安装应该是非常顺畅

依赖关系解决==================================================================================================================================================== Package                                  架构                            版本                                  源                             大小====================================================================================================================================================正在安装: tigervnc                                 x86_64                          1.3.1-3.el7                           base                          210 k tigervnc-server                          x86_64                          1.3.1-3.el7                           base                          202 k为依赖而安装: fltk                                     x86_64                          1.3.0-13.el7                          base                          654 k tigervnc-icons                           noarch                          1.3.1-3.el7                           base                           35 k事务概要====================================================================================================================================================安装  2 软件包 (+2 依赖软件包)总下载量：1.1 M安装大小：2.6 M

安装完毕之后，配置一个密码就可以用了。下面这个密码就是客户端连接所用的密码，和本地user的密码可以不同

vncpasswd 

下面就可以启动VNC服务器了，注意当前命令行是哪个用户那么远程登录之后就是哪个用户，权限也是一致的

vncserver

每次执行都会新建一个vnc服务端，第一个使用5901端口，第二个5902以此类推。

windows做客户端的话，只需要安装一个VNCViewer，填入IP和端口，写上上面录入的密码就可以登录图形化界面

安装FTP不复杂，但是装FTP主要就是为了在SSH之外查看和修改服务器上的文件的，一般都会做成匿名访问，拥有很高的权限，可以查看，修改，删除任意一个服务器上的文件。主要任务就是修改配置文件/etc/vsftpd/vsftpd.conf,修改后如下

# Example config file /etc/vsftpd/vsftpd.conf## The default compiled in settings are fairly paranoid. This sample file# loosens things up a bit, to make the ftp daemon more usable.# Please see vsftpd.conf.5 for all compiled in defaults.## READ THIS: This example file is NOT an exhaustive list of vsftpd options.# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's# capabilities.## Allow anonymous FTP? (Beware - allowed by default if you comment this out).anonymous_enable=YESlocal_root=/chroot_local_user=YESanon_root=/## Uncomment this to allow local users to log in.# When SELinux is enforcing check for SE bool ftp_home_dirlocal_enable=YES## Uncomment this to enable any form of FTP write command.write_enable=YES## Default umask for local users is 077. You may wish to change this to 022,# if your users expect that (022 is used by most other ftpd's)local_umask=022## Uncomment this to allow the anonymous FTP user to upload files. This only# has an effect if the above global write enable is activated. Also, you will# obviously need to create a directory writable by the FTP user.# When SELinux is enforcing check for SE bool allow_ftpd_anon_write, allow_ftpd_full_accessanon_upload_enable=YESanon_world_readable_only=NOanon_umask=022anon_other_write_enable=YES## Uncomment this if you want the anonymous FTP user to be able to create# new directories.anon_mkdir_write_enable=YES## Activate directory messages - messages given to remote users when they# go into a certain directory.dirmessage_enable=YES## Activate logging of uploads/downloads.xferlog_enable=YES## Make sure PORT transfer connections originate from port 20 (ftp-data).connect_from_port_20=YES## If you want, you can arrange for uploaded anonymous files to be owned by# a different user. Note! Using "root" for uploaded files is not# recommended!chown_uploads=YES#chown_username=whoever## You may override where the log file goes if you like. The default is shown# below.#xferlog_file=/var/log/xferlog## If you want, you can have your log file in standard ftpd xferlog format.# Note that the default log file location is /var/log/xferlog in this case.xferlog_std_format=YES## You may change the default value for timing out an idle session.#idle_session_timeout=600## You may change the default value for timing out a data connection.#data_connection_timeout=120## It is recommended that you define on your system a unique user which the# ftp server can use as a totally isolated and unprivileged user.#nopriv_user=ftpsecure## Enable this and the server will recognise asynchronous ABOR requests. Not# recommended for security (the code is non-trivial). Not enabling it,# however, may confuse older FTP clients.#async_abor_enable=YES## By default the server will pretend to allow ASCII mode but in fact ignore# the request. Turn on the below options to have the server actually do ASCII# mangling on files when in ASCII mode.# Beware that on some FTP servers, ASCII support allows a denial of service# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd# predicted this attack and has always been safe, reporting the size of the# raw file.# ASCII mangling is a horrible feature of the protocol.#ascii_upload_enable=YES#ascii_download_enable=YES## You may fully customise the login banner string:#ftpd_banner=Welcome to blah FTP service.## You may specify a file of disallowed anonymous e-mail addresses. Apparently# useful for combatting certain DoS attacks.#deny_email_enable=YES# (default follows)#banned_email_file=/etc/vsftpd/banned_emails## You may specify an explicit list of local users to chroot() to their home# directory. If chroot_local_user is YES, then this list becomes a list of# users to NOT chroot().# (Warning! chroot'ing can be very dangerous. If using chroot, make sure that# the user does not have write access to the top level directory within the# chroot)#chroot_local_user=YES#chroot_list_enable=YES# (default follows)#chroot_list_file=/etc/vsftpd/chroot_list## You may activate the "-R" option to the builtin ls. This is disabled by# default to avoid remote users being able to cause excessive I/O on large# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume# the presence of the "-R" option, so there is a strong case for enabling it.#ls_recurse_enable=YES## When "listen" directive is enabled, vsftpd runs in standalone mode and# listens on IPv4 sockets. This directive cannot be used in conjunction# with the listen_ipv6 directive.listen=NO## This directive enables listening on IPv6 sockets. By default, listening# on the IPv6 "any" address (::) will accept connections from both IPv6# and IPv4 clients. It is not necessary to listen on *both* IPv4 and IPv6# sockets. If you want that (perhaps because you want to listen on specific# addresses) then you must run two copies of vsftpd with two configuration# files.# Make sure, that one of the listen options is commented !!listen_ipv6=YESpam_service_name=vsftpduserlist_enable=YEStcp_wrappers=YES

启动vsftpd的命令是：

service vsftpd restart

但是光这样是无法像root一样访问服务器的，因为对于RedHat还有一个selinux用来加强安全的，必须要关闭它

方法1：修改/etc/selinux/config文件中的SELINUX="" 为 disabled ，然后重启。

方法2：用命令setenforce 0，无需重启。（setenforce的格式：setenforce [ Enforcing | Permissive | 1 | 0 ]）

然后就可以自由的操作FTP了。

如果你不想任何一个人通过浏览器就可以匿名访问你的FTP主机，那么可以加上下面两行，只允许除root以外的限定用户通过账号密码登录

userlist_deny=NOuserlist_file=/etc/vsftpd/user_list

然后你可以修改/etc/vsftpd/user_list来限定访问的用户，注意考虑/etc/vsftpd/ftpusers这个文件里面记录了黑名单。

最后要注意要对相应的要通过FTP传输的文件赋予相关访问权限。

比如如下三个文件：

-rw-------.   1 root root   126 9\u6708  12 18:39 ftpusers
-rw-------.   1 root root   366 9\u6708  12 18:41 user_list
-rw-------.   1 root root  5206 9\u6708  12 19:08 vsftpd.conf
-rwxr--rw-.   1 root root   338 8\u6708   3 2015 vsftpd_conf_migrate.sh

那么对于FTP用户来说，只能读取 vsftpd_conf_migrate.sh这一个文件，其余三个文件均无法读写。原因是

-rw------- 前三个是文件所有者的权限，中间三个是与文件所有者同组的权限，最后三位是其他用户的权限，FTP属于其他用户（如果你使用Linux的用户登录，那么要注意是否同组的问题），所以最后三位需要为rw-,一般执行如下命令

chmod o+r+w -R /xxx/xxx/*

意思就是对于其他用户（o）对某个目录下所有文件和递归后的文件，全部添加r和w权限，当然这样也是比较危险的。

另外RedHat安装完毕之后会自动打开防火墙，封锁除22以外的所有端口，所以还需要把防火墙暂时关闭

systemctl stop firewalld

永久关闭

systemctl disable firewalld

开启防火墙

systemctl enable firewalld