CentOS 7 下安装mosquitto
来源:互联网 发布:硬盘修复软件 编辑:程序博客网 时间:2024/05/21 18:32
简介
MQTT
(Message Queuing Telemetry Transport,消息队列遥测传输)是IBM开发的一个即时通讯协议
,有可能成为物联网的重要组成部分。该协议支持所有平台,几乎可以把所有联网物品和外部连接起来,被用来当做传感器和制动器(比如通过Twitter让房屋联网)的通信协议。
特点
MQTT协议
是为大量计算能力有限,且工作在低带宽、不可靠的网络的远程传感器和控制设备通讯而设计的协议,它具有以下主要的几项特性:
1、使用发布/订阅消息模式,提供一对多的消息发布,解除应用程序耦合;
2、对负载内容屏蔽的消息传输;
3、使用 TCP/IP 提供网络连接;
4、有三种消息发布服务质量:
“至多一次”,消息发布完全依赖底层 TCP/IP 网络。会发生消息丢失或重复。这一级别可用于如下情况,环境传感器数据,丢失一次读记录无所谓,因为不久后还会有第二次发送。
“至少一次”,确保消息到达,但消息重复可能会发生。
“只有一次”,确保消息到达一次。这一级别可用于如下情况,在计费系统中,消息重复或丢失会导致不正确的结果。
5、小型传输,开销很小(固定长度的头部是 2 字节),协议交换最小化,以降低网络流量;
6、使用 Last Will 和 Testament 特性通知有关各方客户端异常中断的机制;
安装与配置
准备
在/etc/yum.repos.d/
目录中新建一个mosquitto.repo
文件
[home_oojah_mqtt]name=mqtt (CentOS_CentOS-7)type=rpm-mdbaseurl=http://download.opensuse.org/repositories/home:/oojah:/mqtt/CentOS_CentOS-7/gpgcheck=1gpgkey=http://download.opensuse.org/repositories/home:/oojah:/mqtt/CentOS_CentOS-7//repodata/repomd.xml.keyenabled=1
执行 yum search all mosquitto
[root@localhost ~]# yum search all mosquitto已加载插件:fastestmirrorLoading mirror speeds from cached hostfile * epel: mirrors.ustc.edu.cn============================================================================================================= 匹配:mosquitto ==============================================================================================================mosquitto-clients.x86_64 : Mosquitto command line publish/subscribe clientsmosquitto-debuginfo.x86_64 : Debug information for package mosquittomosquitto-devel.x86_64 : Development files for mosquittomosquitto.x86_64 : An Open Source MQTT v3.1/v3.1.1 Brokerlibmosquitto-devel.x86_64 : MQTT C client library development fileslibmosquitto1.x86_64 : MQTT C client librarylibmosquittopp-devel.x86_64 : MQTT C++ client library development fileslibmosquittopp1.x86_64 : MQTT C++ client library
安装mosquitto客户端
执行 yum install -y mosquitto-clients.x86_64
[root@localhost ~]# yum install -y mosquitto-clients.x86_64
安装mosquitto服务
执行命令 yum install mosquitto.x86_64
[root@localhost ~]# yum -y install mosquitto.x86_64
修改mosquitto.conf文件
文件在/etc/mosquitto/mosquitto.conf
下面是可以选择的参数 在 /etc/mosquitto/mosquitto.conf.example
中
# ================================================================= # General configuration # ================================================================= # 客户端心跳的间隔时间 #retry_interval 20 # 系统状态的刷新时间 #sys_interval 10 # 系统资源的回收时间,0表示尽快处理 #store_clean_interval 10 # 服务进程的PID #pid_file /var/run/mosquitto.pid # 服务进程的系统用户 #user mosquitto # 客户端心跳消息的最大并发数 #max_inflight_messages 10 # 客户端心跳消息缓存队列 #max_queued_messages 100 # 用于设置客户端长连接的过期时间,默认永不过期 #persistent_client_expiration# =================================================================# Default listener# =================================================================# 服务绑定的IP地址#bind_address# 服务绑定的端口号#port 1883# 允许的最大连接数,-1表示没有限制#max_connections -1# cafile:CA证书文件# capath:CA证书目录# certfile:PEM证书文件# keyfile:PEM密钥文件#cafile#capath#certfile#keyfile# 必须提供证书以保证数据安全性#require_certificate false# 若require_certificate值为true,use_identity_as_username也必须为true#use_identity_as_username false# 启用PSK(Pre-shared-key)支持#psk_hint# SSL/TSL加密算法,可以使用“openssl ciphers”命令获取# as the output of that command.#ciphers# =================================================================# Persistence# =================================================================# 消息自动保存的间隔时间#autosave_interval 1800# 消息自动保存功能的开关#autosave_on_changes false# 持久化功能的开关persistence true# 持久化DB文件#persistence_file mosquitto.db# 持久化DB文件目录#persistence_location /var/lib/mosquitto/# =================================================================# Logging# =================================================================# 4种日志模式:stdout、stderr、syslog、topic# none 则表示不记日志,此配置可以提升些许性能log_dest none# 选择日志的级别(可设置多项)#log_type error#log_type warning#log_type notice#log_type information# 是否记录客户端连接信息#connection_messages true# 是否记录日志时间#log_timestamp true# =================================================================# Security# =================================================================# 客户端ID的前缀限制,可用于保证安全性#clientid_prefixes# 允许匿名用户#allow_anonymous true# 用户/密码文件,默认格式:username:password#password_file# PSK格式密码文件,默认格式:identity:key#psk_file# pattern write sensor/%u/data# ACL权限配置,常用语法如下:# 用户限制:user <username># 话题限制:topic [read|write] <topic># 正则限制:pattern write sensor/%u/data#acl_file# =================================================================# Bridges# =================================================================# 允许服务之间使用“桥接”模式(可用于分布式部署)#connection <name>#address <host>[:<port>]#topic <topic> [[[out | in | both] qos-level] local-prefix remote-prefix]# 设置桥接的客户端ID#clientid # 桥接断开时,是否清除远程服务器中的消息 #cleansession false # 是否发布桥接的状态信息 #notifications true # 设置桥接模式下,消息将会发布到的话题地址 # $SYS/broker/connection/<clientid>/state #notification_topic # 设置桥接的keepalive数值 #keepalive_interval 60 # 桥接模式,目前有三种:automatic、lazy、once #start_type automatic # 桥接模式automatic的超时时间 #restart_timeout 30 # 桥接模式lazy的超时时间 #idle_timeout 60 # 桥接客户端的用户名 #username # 桥接客户端的密码 #password # bridge_cafile:桥接客户端的CA证书文件 # bridge_capath:桥接客户端的CA证书目录 # bridge_certfile:桥接客户端的PEM证书文件 # bridge_keyfile:桥接客户端的PEM密钥文件 #bridge_cafile #bridge_capath #bridge_certfile #bridge_keyfile # 自己的配置可以放到以下目录中 include_dir /etc/mosquitto/conf.d
启动服务
mosquitto -c /etc/mosquitto/mosquitto.conf -d
主要还是根据需求来配置好用户和加密,用的时候需要了解mqtt协议。
- CentOS 7 下安装mosquitto
- CentOS 7 安装 mosquitto
- CentOS下安装mosquitto(MQTT)
- Linux centos 7下搭建mosquitto
- MQTT学习1——CentOS下安装Mosquitto
- Centos7下安装mosquitto
- Debian下安装Mosquitto
- 在阿里云Centos 7上安装mosquitto
- linux下安装mosquitto-1.1.3
- Mac 下 Mosquitto 安装和配置
- mosquitto ubuntu下编译和安装
- ubuntu下mosquitto的安装使用
- Linux下Mosquitto安装和使用
- Windows下安装配置Apollo和Mosquitto
- Windows下安装配置Apollo和Mosquitto
- mosquitto在linux下的安装2
- Linux下Mosquitto安装和使用
- windows server下安装使用mosquitto
- Pandas 使用教程 2
- C++中的const
- 正则表达式pattern内部\\\\用法
- CodeMirror 的简单配置
- bzoj1468 Tree 点分治
- CentOS 7 下安装mosquitto
- Nginx常用集群以及解决TomcatSession问题
- keil工程无法调试
- rotate-image
- AngularJS 学习笔记(4)-过滤器,$location
- ArcEngine创建要素类_线图层
- 项目1-C++语言中函数参数传递的三种方式
- 算法提高 ADV-135 三角形面积
- IE8、7、6动态添加样式时,CSS hack的BUG