caffe .bashrc+/etc/profile+Makefile.cofig
来源:互联网 发布:淘宝网恒源祥毛衣 编辑:程序博客网 时间:2024/05/19 20:56
在ubuntu服务器上安装caffe配置环境变量时,要加上一句export LC_ALL=C如下图红色字体部分,但是在自己带gpu的小电脑上安装caffe时,环境变量千万不要加export LC_ALL=C这句话(绝对路径和相对路径都不能加),否则下次系统开机时会进不去终端(Ctrl+Alt+T)。笔者当时在这个坑里徘徊了接近一个晚上,简直智障。
# source the ros-kinetic environment
# source the catkin_wssource /opt/ros/kinetic/setup.bash
source /home/pl/catkin_ws/devel/setup.bash
#cuda
export PATH=$PATH:/usr/local/cuda-8.0/bin
export LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:/usr/local/cuda-8.0/lib64
#cudnn
export LD_LIBRARY_PATH=/usr/local/cuda/lib64/:$LD_LIBRARY_PATH
export CPLUS_INCLUDE_PATH=/usr/local/cuda/include:$CPLUS_INCLUDE_PATH
#OpenBLAS
export LD_LIBRARY_PATH=/usr/lib:$LD_LIBRARY_PATH
export OPENBLAS_NUM_THREADS=20
#opencv cmake
export LD_LIBRARY_PATH=/usr/local/lib:$LD_LIBRARY_PATH
export PATH=/usr/local/bin:$PATH
export PATH=/usr/bin:$PATH
#caffe python
export PYTHONPATH=~/Documents/ssd/python:$PYTHONPATH
export LC_ALL=C
## Refer to http://caffe.berkeleyvision.org/installation.html
# Contributions simplifying and improving our build system are welcome!
# cuDNN acceleration switch (uncomment to build with cuDNN).
# USE_CUDNN := 1
# CPU-only switch (uncomment to build without GPU support).
# CPU_ONLY := 1
# uncomment to disable IO dependencies and corresponding data layers
# USE_OPENCV := 0
# USE_LEVELDB := 0
# USE_LMDB := 0
# uncomment to allow MDB_NOLOCK when reading LMDB files (only if necessary)
# You should not set this flag if you will be reading LMDBs with any
# possibility of simultaneous read and write
# ALLOW_LMDB_NOLOCK := 1
# Uncomment if you're using OpenCV 3
OPENCV_VERSION := 3
# To customize your choice of compiler, uncomment and set the following.
# N.B. the default for Linux is g++ and the default for OSX is clang++
CUSTOM_CXX := /usr/bin/g++-5
# CUDA directory contains bin/ and lib/ directories that we need.
CUDA_DIR := /usr/local/cuda-8.0
# On Ubuntu 14.04, if cuda tools are installed via
# "sudo apt-get install nvidia-cuda-toolkit" then use this instead:
# CUDA_DIR := /usr
# CUDA architecture setting: going with all of them.
# For CUDA < 6.0, comment the *_50 lines for compatibility.
CUDA_ARCH := -gencode arch=compute_20,code=sm_20 \
-gencode arch=compute_20,code=sm_21 \
-gencode arch=compute_30,code=sm_30 \
-gencode arch=compute_35,code=sm_35 \
-gencode arch=compute_50,code=sm_50 \
-gencode arch=compute_50,code=compute_50
# BLAS choice:
# atlas for ATLAS (default)
# mkl for MKL
# open for OpenBlas
BLAS := open
# Custom (MKL/ATLAS/OpenBLAS) include and lib directories.
# Leave commented to accept the defaults for your choice of BLAS
# (which should work)!
# BLAS_INCLUDE := /home/jiaqun/local/OpenBLAS/include
# BLAS_LIB := /home/jiaqun/local/OpenBLAS/lib
# Homebrew puts openblas in a directory that is not on the standard search path
# BLAS_INCLUDE := $(shell brew --prefix openblas)/include
# BLAS_LIB := $(shell brew --prefix openblas)/lib
# This is required only if you will compile the matlab interface.
# MATLAB directory should contain the mex binary in /bin.
# MATLAB_DIR := /usr/local/MATLAB/R2017a
# MATLAB_DIR := /Applications/MATLAB_R2012b.app
# NOTE: this is required only if you will compile the python interface.
# We need to be able to find Python.h and numpy/arrayobject.h.
PYTHON_INCLUDE := /usr/include/python2.7 \
/usr/local/lib/python2.7/dist-packages/numpy/core/include
# Anaconda Python distribution is quite popular. Include path:
# Verify anaconda location, sometimes it's in root.
#ANACONDA_HOME := /home/sean/local/anaconda2
#PYTHON_INCLUDE := $(ANACONDA_HOME)/include \
$(ANACONDA_HOME)/include/python2.7 \
$(ANACONDA_HOME)/lib/python2.7/site-packages/numpy/core/include \
# Uncomment to use Python 3 (default is Python 2)
# PYTHON_LIBRARIES := boost_python3 python3.5m
# PYTHON_INCLUDE := /usr/include/python3.5m \
# /usr/lib/python3.5/dist-packages/numpy/core/include
# We need to be able to find libpythonX.X.so or .dylib.
PYTHON_LIB := /usr/lib
#PYTHON_LIB := $(ANACONDA_HOME)/lib
# Homebrew installs numpy in a non standard path (keg only)
# PYTHON_INCLUDE += $(dir $(shell python -c 'import numpy.core; print(numpy.core.__file__)'))/include
# PYTHON_LIB += $(shell brew --prefix numpy)/lib
# Uncomment to support layers written in Python (will link against Python libs)
WITH_PYTHON_LAYER := 1
# Whatever else you find you need goes here.
INCLUDE_DIRS := $(PYTHON_INCLUDE) /usr/local/include /usr/include/hdf5/serial /usr/local/cuda/include #/home/pl/Downloads/cuda/include
LIBRARY_DIRS := $(PYTHON_LIB) /usr/local/lib /usr/lib /usr/lib/x86_64-linux-gnu /usr/lib/x86_64-linux-gnu/hdf5/serial /usr/local/cuda/lib64 #/home/pl/Downloads/cuda/lib64
# If Homebrew is installed at a non standard location (for example your home directory) and you use it for general dependencies
# INCLUDE_DIRS += $(shell brew --prefix)/include
# LIBRARY_DIRS += $(shell brew --prefix)/lib
# Uncomment to use `pkg-config` to specify OpenCV library paths.
# (Usually not necessary -- OpenCV libraries are normally installed in one of the above $LIBRARY_DIRS.)
# USE_PKG_CONFIG := 1
# N.B. both build and distribute dirs are cleared on `make clean`
BUILD_DIR := build
DISTRIBUTE_DIR := distribute
# Uncomment for debugging. Does not work on OSX due to https://github.com/BVLC/caffe/issues/171
# DEBUG := 1
# The ID of the GPU that 'make runtest' will use to run unit tests.
TEST_GPUID := 0
# enable pretty build (comment to see full commands)
Q ?= @
- caffe .bashrc+/etc/profile+Makefile.cofig
- .bashrc和/etc/profile
- /etc/profile ~/.bashrc区别
- /etc/bashrc和/etc/profile
- /etc/profile、/etc/bashrc、~/.bash_profile、~/.bashrc
- /etc/profile、/etc/bashrc、~/.bash_profile、~/.bashrc
- /etc/profile、/etc/bashrc、~/.bash_profile、~/.bashrc 比较
- /etc/profile /etc/bashrc ~/.bash_profile ~/.bashrc 区别
- /etc/profile、/etc/bashrc、~/.bash_profile、~/.bashrc
- /etc/profile、/etc/bashrc、~/.bash_profile、~/.bashrc
- /etc/profile、/etc/bashrc、~/.bash_profile、~/.bashrc
- /etc/profile,/etc/bashrc,~/.bash_profile,~/.bashrc
- /etc/profile、/etc/bashrc、~/.bash_profile、~/.bashrc
- Linux /etc/profile,~/.bash_profile,~/.bashrc,/etc/bashrc
- /etc/profile、/etc/bashrc、~/.bash_profile、~/.bashrc
- /etc/profile、~/.bashrc、/etc/bashrc、~/.bash_profile、 ~/.bash_login、 ~/.profile、/etc/environment
- 关于Debian中的/etc/.profile, /etc/bash.bashrc, ~/.bashrc, ~/.profile,
- Linux中的~/.profile,~/.bashrc,/etc/profile,/etc/bash.bashrc
- 经济学十大原理
- 算法设计与复杂性原理 第一次上机 玛雅历
- Protocol Buffers(protobuf)java初体验
- 当获取属性值为null
- C++如何读写注册表
- caffe .bashrc+/etc/profile+Makefile.cofig
- Google Map Api 谷歌地图接口整理
- AttributeError: 'WebDriver' object has no attribute 'switchTo' 解决方法
- Storm环境构建和实战
- Android几种打开SQLite的方法
- JAVA设计模式:状态模式
- Java基础——流程跳转语句
- 大数据 课程
- Linux常用命令