poj 3169 Layout (差分约束)
来源:互联网 发布:网络足球解说招聘 编辑:程序博客网 时间:2024/05/22 06:29
Description
Like everyone else, cows like to stand close to their friends when queuing for feed. FJ has N (2 <= N <= 1,000) cows numbered 1..N standing along a straight line waiting for feed. The cows are standing in the same order as they are numbered, and since they can be rather pushy, it is possible that two or more cows can line up at exactly the same location (that is, if we think of each cow as being located at some coordinate on a number line, then it is possible for two or more cows to share the same coordinate).
Some cows like each other and want to be within a certain distance of each other in line. Some really dislike each other and want to be separated by at least a certain distance. A list of ML (1 <= ML <= 10,000) constraints describes which cows like each other and the maximum distance by which they may be separated; a subsequent list of MD constraints (1 <= MD <= 10,000) tells which cows dislike each other and the minimum distance by which they must be separated.
Your job is to compute, if possible, the maximum possible distance between cow 1 and cow N that satisfies the distance constraints.
Input
Line 1: Three space-separated integers: N, ML, and MD.
Lines 2..ML+1: Each line contains three space-separated positive integers: A, B, and D, with 1 <= A < B <= N. Cows A and B must be at most D (1 <= D <= 1,000,000) apart.
Lines ML+2..ML+MD+1: Each line contains three space-separated positive integers: A, B, and D, with 1 <= A < B <= N. Cows A and B must be at least D (1 <= D <= 1,000,000) apart.
Output
Line 1: A single integer. If no line-up is possible, output -1. If cows 1 and N can be arbitrarily far apart, output -2. Otherwise output the greatest possible distance between cows 1 and N.
Sample Input
4 2 1
1 3 10
2 4 20
2 3 3
Sample Output
27
Hint
Explanation of the sample:
There are 4 cows. Cows #1 and #3 must be no more than 10 units apart, cows #2 and #4 must be no more than 20 units apart, and cows #2 and #3 dislike each other and must be no fewer than 3 units apart.
The best layout, in terms of coordinates on a number line, is to put cow #1 at 0, cow #2 at 7, cow #3 at 10, and cow #4 at 27.
Source
USACO 2005 December Gold
题意(从网上扒来的)
n头牛编号为1到n,按照编号的顺序排成一列,每两头牛的之间的距离 >= 0。这些牛的距离存在着一些约束关系:1.有ml组(u, v, w)的约束关系,表示牛[u]和牛[v]之间的距离必须 <= w。2.有md组(u, v, w)的约束关系,表示牛[u]和牛[v]之间的距离必须 >= w。问如果这n头无法排成队伍,则输出-1,如果牛[1]和牛[n]的距离可以无限远,则输出-2,否则则输出牛[1]和牛[n]之间的最大距离。
代码
#include <cstdio>#include <cstring>#include <algorithm>using namespace std;const int N = 200010;struct Edge { int v, w, next;} e[N << 1];int n, ml, md, num = 0, a[N], h[N << 1];void add(int u, int v, int w) { num ++; e[num].v = v; e[num].w = w; e[num].next = h[u]; h[u] = num;}int head = 0, tail = 1, cnt[N], vis[N], dis[N], queue[N << 3];int spfa(int s) { memset(cnt, 0, sizeof(cnt)); queue[1] = s; vis[s] = cnt[s] = 1; dis[s] = 0; while(head < tail) { int u = queue[++ head]; vis[u] = false; for(int i = h[u]; i; i = e[i].next) { int v = e[i].v; if(dis[v] > dis[u] + e[i].w) { dis[v] = dis[u] + e[i].w; if(! vis[v]) { if(++ cnt[v] > n) return -1; vis[v] = true; queue[++ tail] = v; } } } } if(dis[n] == 0x3ffffff) return -2; return dis[n];}int main() { while(~ scanf("%d %d %d", &n, &ml, &md)) { memset(h, 0, sizeof(h)); for(int i = 1; i <= n; i ++) dis[i] = 0x3ffffff, add(i, i - 1, 0); while(ml --) { int a, b, w; scanf("%d %d %d", &a, &b, &w); add(a, b, w); } while(md --) { int a, b, w; scanf("%d %d %d", &a, &b, &w); add(b, a, -w); } printf("%d\n", spfa(1)); } return 0; }
- poj 3169 Layout(差分约束)
- poj 3169 Layout(差分约束)
- POJ 3169 Layout (差分约束)
- POJ 3169 Layout(差分约束)
- poj 3169 Layout(差分约束)
- poj 3169 Layout (差分约束)
- POJ-3169 Layout(差分约束)
- poj 3169 Layout (差分约束)
- POJ 3169 Layout(差分约束系统)
- POJ 3169 Layout [差分约束]
- POJ 3169 Layout 差分约束系统
- POJ 3169 Layout 差分约束系统
- poj 3169 Layout 差分约束
- POJ 3169 Layout(差分约束系统)
- POJ 3169 Layout (差分约束spfa)
- poj 3169 Layout (差分约束+Bellman )
- poj 3169 Layout (差分约束+Bellman )
- POJ 3169-Layout(差分约束系统)
- 网络编程概述及实例练习
- unity 利用Android Studio实时查看打印日志
- Python中的optparse模块
- 随机产生,排序,合并,逆序
- HTML5新增的常用元素
- poj 3169 Layout (差分约束)
- Spring常见注解及注解注入
- Python 下载网页
- 阿里巴巴涉足的领域
- matplotlib--设置坐标轴
- Java中的锁 (3) 同步器AQS (AbstractQueuedSynchronizer)
- Spark RDD API解析及实战
- 最小生成树(prime)
- shell语法整理