gfzrnx使用帮助
来源:互联网 发布:守望先锋鼠标推荐知乎 编辑:程序博客网 时间:2024/06/06 00:56
[zzh@zzhp910H bin]$ gfzrnx -help
***** USAGE: /home/zzh/bin/gfzrnx
file only or common options
-----------------------------------------------------------------------------------------
[-h] - show this usage message
[-help]
[-finp <file list>] - input rinex file(s) (std. STDIN).
STDIN is only valid for a single file input.
the following file name types are supported to derive the
nominal epoch/duration information.
RINEX-2 file naming
ssssDDD0.YYx - daily file
ssssDDD[a-x].YYx - hourly file
ssssDDD[a-x]mm.YYx - sub-hourly file
RINEX-3 file naming
SSSSMRCCC_S_YYYYDDDHHMM_NNN_FRQ_TT.FMT
SSSSMRCCC_S_YYYYDDDHHMM_NNN_TT.FMT
see Documentation for details
splice mode:
------------
* list of input files
[-fout <file>] - output rinex or statistics file (std. STDOUT)
automatic file_name if filename given is "::RX2::" or "::RX3::".
[-4to9 <file>] - renaming information for rinex-3 type (re)naming
( NNNN -> NNNNMRCCC / POTS -> POTS00DEU )
[-f] - force overwrite of output file if it already exists
(std. no overwrite)
[-sifl] - perform an operation on a single file if a file list is
[-single_file] provided via "-finp"
[-nomren23 <[s,][mr,][iso]>] - fast nominal output file name for RINEX-2 to RINEX-3 file renaming.
RINEX-3 output file name is written to STDOUT.
s - data source (S|R) (default R)
mr - marker receiver number (default 00)
iso - 3 char. iso country code (default XXX)
the input parameters can be given in any order.
supported input file names nnnnddde.yyt[.cmp] or nnnndddedd.yyt[.cmp]
if providing a compressed file all information which is usually taken
from file header (sat. system(s), data frequency) has to be given via the
command line parameter (see documion for details).
[-vo <2|3>] - output RINEX version (std. 3)
[--version_out <2|3>]
[-pr3rx2 <list>] - komma separated list of list of signal priorities used for rinex 3 -> 2 conversion
to overwrite the standard settings, see documentation for details.
S:n[n...]:STRING
S - satellite System [CEGJRSI]
n - frequency number(s)
STRING - prority STRING
G:12:PWCSLXYN,G:5:QXI,R:12:CP
[-errlog <file>] - store (append) error logs to a file (std. print to STDERR)
[-smp <num>] - sampling rate in sec. (std. no sampling / resolution 1 ms)
[-stk_obs] - output data statistics information (std. STDOUT)
[-stk_only]
[-crux <file>] - rinex header manipulations definitions for input files
[-show_crux] - show crux structure adopted and used by the program
[-hded] - perform the header edit ONLY mode (with -crux)
[-stk_epo <n[:list]>] - ASCII timeplot of data availability (std. STDOUT)
n - time resolution in seconds
list - comma separated list (prn,otp) (std. prn)
[-ot <list>] - obs. types list to be used (pattern matching). the list can be given
[--obs_types <list>] globaly or sat. system dependent. the sat. system dependent record
replaces fully a global one.
list can be: [S:]OT1,OT2,...[+S:OT3,OT4,...][+...]
S - satellite system [CEGJRSI]
OT - observation type identifier
L1,L2,C1,C2,P1,P2
L1,L2,C1,C2,P1,P2+C:L1,L7,C1,C7+G:L1C,L2W,C1,C2
[-ots <string>[:<attr>]] - obs. types output sorting
[--obs_types_sort <string>[:<attr>]]
the "string" consists of the 1st obs. type id. characters ( e.g. CPLDS ),
the "attr" can be [frqasc|frqdsc|frqi,j,...] (frequ. numbers (i,j,...) = 1,...,n),
which means a preferred sorting by frequency (ascending,descending or
a list of distinct frequency numbers)
[-prn <prn-list>] - komma separated list of PRNs to be used
range notations are possible G1-32,C01-5,R01-10,E14,E18
[-no_prn <prn-list>] - komma separated list of PRNs to be skipped
range notations are possible G1-32,C01-5,R01-10,E14,E18
[-kaot] - keep all obs. types (including fully empty ones)
[-rsot <n>] - remove sparse obs. types.
[--remove_sparse_obs_types <n>] n - defines the % limit of the median number of observations
per observation type used to delete an observation type fully.
[-satsys <letters>] - satellite system(s) to be used (CEGIJRS) (std. CEGIJRS)
C - Beidou
E - Galileo
G - GPS
I - IRNSS
J - QZSS
R - Glonass
S - SBAS
[-ns <type>] - output order of navigation records. type = [time|prn] (std. prn)
[--nav_sort <type>] time - sort by time,prn
prn - sort by prn,time
[-split n] - split input file in <n seconds> pieces
- valid only with -fout ::RX2:: or ::RX3::
- valid if n is a multiple of 60 seconds.
- only supported for single input file
[-chk] - extended formal checks on input file (slower)
[-meta <type[:format]>] - extract file meta data. the type can be (basic|full).
supported formats are json|xml|txt|dump
[-fdiff] - compare two rinex files of the same format (major version id.)
the two input files have to be given via -finp
[-site <sitename>] - use the 4- or 9-char sitename for output filename via automatic file naming
or for header editing settings extractions (crux)
or for "MARKER NAME" in case it is missing.
[-kv] - keep major output version number (2|3) same as in input
[-q] - quiet mode
[-d <sec>] - file duration (seconds) (std. ignored on input
[--duration <sec>] std. 86400 on output )
[-epo_beg <EPOCH>] - first output epoch (<EPOCH> see below)
[-sei <in|out>]
[--strict_epoch_interval <in|out>] - output epoch interval according to in/output file name
(only valid in case of RINEX conform file names)
[-enb <n>] - extend the nav. epoch interval by -n and +n seconds
(when using strict epoch interval)
[-use_obs_map <file>] - use modified obs. types mapping
[-out_obs_map] - output std. obs. types mapping
epoch <EPOCH> parameter
-----------------------------------------------------------------------------------------
mjd 56753 or 56753_123000
wwwwd 17870 or 17870_12:30:00
yyyyddd 2014096 or 2014096_123000
yyyymmdd 20140406 or 20140406_12:30:00
yyyy-mm-dd 2014-04-06 or 2014-04-06_123000
all these date types can be combined via '_' with a time string of type:
hhmmss
hh:mm:ss
----------------------------------------------------------------------------------------------
© Helmholtz-Centre Potsdam - GFZ German Research Centre for Geosciences
Section 1.1 Space Geodetic Techniques
see http://semisys.gfz-potsdam.de/semisys [Download -> GFZ Software -> gfzrnx]
for the manual with license details
Thomas Nischan, nisn@gfz-potsdam.de
----------------------------------------------------------------------------------------------
VERSION: gfzrnx-1.08-7186
***** USAGE: /home/zzh/bin/gfzrnx
file only or common options
-----------------------------------------------------------------------------------------
[-h] - show this usage message
[-help]
[-finp <file list>] - input rinex file(s) (std. STDIN).
STDIN is only valid for a single file input.
the following file name types are supported to derive the
nominal epoch/duration information.
RINEX-2 file naming
ssssDDD0.YYx - daily file
ssssDDD[a-x].YYx - hourly file
ssssDDD[a-x]mm.YYx - sub-hourly file
RINEX-3 file naming
SSSSMRCCC_S_YYYYDDDHHMM_NNN_FRQ_TT.FMT
SSSSMRCCC_S_YYYYDDDHHMM_NNN_TT.FMT
see Documentation for details
splice mode:
------------
* list of input files
[-fout <file>] - output rinex or statistics file (std. STDOUT)
automatic file_name if filename given is "::RX2::" or "::RX3::".
[-4to9 <file>] - renaming information for rinex-3 type (re)naming
( NNNN -> NNNNMRCCC / POTS -> POTS00DEU )
[-f] - force overwrite of output file if it already exists
(std. no overwrite)
[-sifl] - perform an operation on a single file if a file list is
[-single_file] provided via "-finp"
[-nomren23 <[s,][mr,][iso]>] - fast nominal output file name for RINEX-2 to RINEX-3 file renaming.
RINEX-3 output file name is written to STDOUT.
s - data source (S|R) (default R)
mr - marker receiver number (default 00)
iso - 3 char. iso country code (default XXX)
the input parameters can be given in any order.
supported input file names nnnnddde.yyt[.cmp] or nnnndddedd.yyt[.cmp]
if providing a compressed file all information which is usually taken
from file header (sat. system(s), data frequency) has to be given via the
command line parameter (see documion for details).
[-vo <2|3>] - output RINEX version (std. 3)
[--version_out <2|3>]
[-pr3rx2 <list>] - komma separated list of list of signal priorities used for rinex 3 -> 2 conversion
to overwrite the standard settings, see documentation for details.
S:n[n...]:STRING
S - satellite System [CEGJRSI]
n - frequency number(s)
STRING - prority STRING
G:12:PWCSLXYN,G:5:QXI,R:12:CP
[-errlog <file>] - store (append) error logs to a file (std. print to STDERR)
[-smp <num>] - sampling rate in sec. (std. no sampling / resolution 1 ms)
[-stk_obs] - output data statistics information (std. STDOUT)
[-stk_only]
[-crux <file>] - rinex header manipulations definitions for input files
[-show_crux] - show crux structure adopted and used by the program
[-hded] - perform the header edit ONLY mode (with -crux)
[-stk_epo <n[:list]>] - ASCII timeplot of data availability (std. STDOUT)
n - time resolution in seconds
list - comma separated list (prn,otp) (std. prn)
[-ot <list>] - obs. types list to be used (pattern matching). the list can be given
[--obs_types <list>] globaly or sat. system dependent. the sat. system dependent record
replaces fully a global one.
list can be: [S:]OT1,OT2,...[+S:OT3,OT4,...][+...]
S - satellite system [CEGJRSI]
OT - observation type identifier
L1,L2,C1,C2,P1,P2
L1,L2,C1,C2,P1,P2+C:L1,L7,C1,C7+G:L1C,L2W,C1,C2
[-ots <string>[:<attr>]] - obs. types output sorting
[--obs_types_sort <string>[:<attr>]]
the "string" consists of the 1st obs. type id. characters ( e.g. CPLDS ),
the "attr" can be [frqasc|frqdsc|frqi,j,...] (frequ. numbers (i,j,...) = 1,...,n),
which means a preferred sorting by frequency (ascending,descending or
a list of distinct frequency numbers)
[-prn <prn-list>] - komma separated list of PRNs to be used
range notations are possible G1-32,C01-5,R01-10,E14,E18
[-no_prn <prn-list>] - komma separated list of PRNs to be skipped
range notations are possible G1-32,C01-5,R01-10,E14,E18
[-kaot] - keep all obs. types (including fully empty ones)
[-rsot <n>] - remove sparse obs. types.
[--remove_sparse_obs_types <n>] n - defines the % limit of the median number of observations
per observation type used to delete an observation type fully.
[-satsys <letters>] - satellite system(s) to be used (CEGIJRS) (std. CEGIJRS)
C - Beidou
E - Galileo
G - GPS
I - IRNSS
J - QZSS
R - Glonass
S - SBAS
[-ns <type>] - output order of navigation records. type = [time|prn] (std. prn)
[--nav_sort <type>] time - sort by time,prn
prn - sort by prn,time
[-split n] - split input file in <n seconds> pieces
- valid only with -fout ::RX2:: or ::RX3::
- valid if n is a multiple of 60 seconds.
- only supported for single input file
[-chk] - extended formal checks on input file (slower)
[-meta <type[:format]>] - extract file meta data. the type can be (basic|full).
supported formats are json|xml|txt|dump
[-fdiff] - compare two rinex files of the same format (major version id.)
the two input files have to be given via -finp
[-site <sitename>] - use the 4- or 9-char sitename for output filename via automatic file naming
or for header editing settings extractions (crux)
or for "MARKER NAME" in case it is missing.
[-kv] - keep major output version number (2|3) same as in input
[-q] - quiet mode
[-d <sec>] - file duration (seconds) (std. ignored on input
[--duration <sec>] std. 86400 on output )
[-epo_beg <EPOCH>] - first output epoch (<EPOCH> see below)
[-sei <in|out>]
[--strict_epoch_interval <in|out>] - output epoch interval according to in/output file name
(only valid in case of RINEX conform file names)
[-enb <n>] - extend the nav. epoch interval by -n and +n seconds
(when using strict epoch interval)
[-use_obs_map <file>] - use modified obs. types mapping
[-out_obs_map] - output std. obs. types mapping
epoch <EPOCH> parameter
-----------------------------------------------------------------------------------------
mjd 56753 or 56753_123000
wwwwd 17870 or 17870_12:30:00
yyyyddd 2014096 or 2014096_123000
yyyymmdd 20140406 or 20140406_12:30:00
yyyy-mm-dd 2014-04-06 or 2014-04-06_123000
all these date types can be combined via '_' with a time string of type:
hhmmss
hh:mm:ss
----------------------------------------------------------------------------------------------
© Helmholtz-Centre Potsdam - GFZ German Research Centre for Geosciences
Section 1.1 Space Geodetic Techniques
see http://semisys.gfz-potsdam.de/semisys [Download -> GFZ Software -> gfzrnx]
for the manual with license details
Thomas Nischan, nisn@gfz-potsdam.de
----------------------------------------------------------------------------------------------
VERSION: gfzrnx-1.08-7186
阅读全文
0 0
- gfzrnx使用帮助
- 使用帮助
- 使用帮助
- PowerDataGrid使用帮助
- Ant 使用语法帮助
- VSS使用帮助2
- VSS使用帮助3
- 使用OutputDebugString帮助调试
- VSS 使用帮助
- 获得使用帮助
- 使用OutputDebugString帮助调试
- mysql使用帮助
- FreetextBox3.1.6使用帮助
- VLC命令行使用帮助
- FCKeditor使用帮助
- 转载:ZedGraph使用帮助
- gcc编译器使用帮助
- qmake使用帮助
- noip2017 初赛总结
- Hadoop集群安装
- 200人融资3亿元,重新定义移动安全市场,这家公司是谁?
- Linux笔记(3)_环境搭建
- Lesson 3 上机练习题——继承 课堂练习: –在包bzu.aa中定义一个交通工具类(Vehicle): 属性——载客量(capacity) 方法 无参构造方法(给capacity初
- gfzrnx使用帮助
- 线程的创建方式及其区别
- jQuery判断checkbox的选中状态
- ubuntu16.04配置环境变量
- C++ 友元friend的使用
- K.N King 现代方法 p25_8(计算还贷剩余)
- 《Java核心技术 卷I》笔记 第一章 Java程序设计概述
- 记录我的Java学习经历(9)
- bzoj1349 [Baltic2006]Squint