工具使用:CentOS6上vsftpd安装使用
来源:互联网 发布:工程三维设计软件 编辑:程序博客网 时间:2024/06/05 18:36
1,安装vsftpd
yum -y install vsftpd
2,创建ftp的存储目录
mkdir /home/ftpfile
3,创建ftp用户:ftpuser,指定关联目录
useradd ftpuser -d /home/ftpfile -s /bin/nologin
4,给ftpuser的用户组添加读取目录的权限
chown -R ftpuser.ftpuser /home/ftpfile
5,给ftpuser添加密码
passwd ftpuser
6,给把新建的用户填写到配置文件中去
vi /etc/vsftpd/chroot_listftpuser保存退出。(把ftpuser写入配置文件后续关联该文件 )
7,安全设置
vi /etc/selinux/config selinux = disabled
8,vsftpd配置文件(关键)
vi /etc/vsftpd/vsftpd.conf
vsftpd.conf文件内容如下:
# Example config file /etc/vsftpd/vsftpd.conf## The default compiled in settings are fairly paranoid. This sample file# loosens things up a bit, to make the ftp daemon more usable.# Please see vsftpd.conf.5 for all compiled in defaults.## READ THIS: This example file is NOT an exhaustive list of vsftpd options.# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's# capabilities.## Allow anonymous FTP? (Beware - allowed by default if you comment this out).anonymous_enable=YES## Uncomment this to allow local users to log in.local_enable=YESlocal_root=/home/ftpfileanon_root=/home/ftpfileuse_localtime=YESanonymous_enable=NO## Uncomment this to enable any form of FTP write command.write_enable=YES## Default umask for local users is 077. You may wish to change this to 022,# if your users expect that (022 is used by most other ftpd's)local_umask=022## Uncomment this to allow the anonymous FTP user to upload files. This only# has an effect if the above global write enable is activated. Also, you will# obviously need to create a directory writable by the FTP user.#anon_upload_enable=YES## Uncomment this if you want the anonymous FTP user to be able to create# new directories.#anon_mkdir_write_enable=YES## Activate directory messages - messages given to remote users when they# go into a certain directory.dirmessage_enable=YES## The target log file can be vsftpd_log_file or xferlog_file.# This depends on setting xferlog_std_format parameterxferlog_enable=YES## Make sure PORT transfer connections originate from port 20 (ftp-data).connect_from_port_20=YES## If you want, you can arrange for uploaded anonymous files to be owned by# a different user. Note! Using "root" for uploaded files is not# recommended!#chown_uploads=YES#chown_username=whoever## The name of log file when xferlog_enable=YES and xferlog_std_format=YES# WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log#xferlog_file=/var/log/xferlog## Switches between logging into vsftpd_log_file and xferlog_file files.# NO writes to vsftpd_log_file, YES to xferlog_filexferlog_std_format=YES## You may change the default value for timing out an idle session.#idle_session_timeout=600## You may change the default value for timing out a data connection.#data_connection_timeout=120## It is recommended that you define on your system a unique user which the# ftp server can use as a totally isolated and unprivileged user.#nopriv_user=ftpsecure## Enable this and the server will recognise asynchronous ABOR requests. Not# recommended for security (the code is non-trivial). Not enabling it,# however, may confuse older FTP clients.#async_abor_enable=YES## By default the server will pretend to allow ASCII mode but in fact ignore# the request. Turn on the below options to have the server actually do ASCII# mangling on files when in ASCII mode.# Beware that on some FTP servers, ASCII support allows a denial of service# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd# predicted this attack and has always been safe, reporting the size of the# raw file.# ASCII mangling is a horrible feature of the protocol.#ascii_upload_enable=YES#ascii_download_enable=YES## You may fully customise the login banner string:ftpd_banner=Welcome to dodan200 FTP service.## You may specify a file of disallowed anonymous e-mail addresses. Apparently# useful for combatting certain DoS attacks.#deny_email_enable=YES# (default follows)#banned_email_file=/etc/vsftpd/banned_emails## You may specify an explicit list of local users to chroot() to their home# directory. If chroot_local_user is YES, then this list becomes a list of# users to NOT chroot().chroot_local_user=YESchroot_list_enable=YESchroot_list_file=/etc/vsftpd/chroot_list# (default follows)#chroot_list_file=/etc/vsftpd/chroot_list## You may activate the "-R" option to the builtin ls. This is disabled by# default to avoid remote users being able to cause excessive I/O on large# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume# the presence of the "-R" option, so there is a strong case for enabling it.#ls_recurse_enable=YES## When "listen" directive is enabled, vsftpd runs in standalone mode and# listens on IPv4 sockets. This directive cannot be used in conjunction# with the listen_ipv6 directive.listen=YES## This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6# sockets, you must run two copies of vsftpd with two configuration files.# Make sure, that one of the listen options is commented !!#listen_ipv6=YESpasv_min_port=61001pasv_max_port=62000pasv_enable=YESpam_service_name=vsftpduserlist_enable=YEStcp_wrappers=YES
9,配置vsftpd的iptables端口
10,重启防火墙
service iptables restart
11,重启vsftpd
service vsftpd restart
12,远程访问vsftpd
ftp://33.33.33.33 登录刚设置的账号ftpuser 和密码
13,开机自动重启
chkconfig vsftpd on
阅读全文
0 0
- 工具使用:CentOS6上vsftpd安装使用
- 工具使用:CentOs6上安装SSR
- Centos5.5上vsftpd安装使用
- 使用dd工具批量安装centos6
- CentOS 安装使用vsftpd
- vsftpd 安装与使用
- vsftpd安装和使用
- vsftpd安装配置使用
- 在centOS6.5 上安装使用pipework
- CentOS6上安装和使用MariaDB
- CentOS6.4安装vsftpd
- CentOS6 vsftpd安装配置
- centos6.5安装vsftpd
- 工具使用:在centOS6上部署运行reactjs+antd+dva
- vsftpd的安装和使用
- 使用webmin安装管理vsftpd
- centos6.5系统下kdump工具的安装和使用
- pyenv在CentOS6.6上的安装和使用
- Kubernetes对象之Replication Controller(RC)和Replica Sets(RS)
- tkinter使用按钮
- BaseActivity的基类
- PCB设计时覆铜应注意的问题
- 你需要了解的前端框架有哪些
- 工具使用:CentOS6上vsftpd安装使用
- tkinter使用文本框
- tkinter使用标签
- Computer Vision 代码整理
- mybatis-xml中写sql语句
- tkinter使用菜单
- tkinter实现右键菜单
- Window下PHP 安装redis扩展
- tkinter实现单选框和复选框