itop4412 uboot 学习详细记录四丶Exynos4412 编译Makefile的配置文件config.mk分析)
来源:互联网 发布:淮安悠迅网络 编辑:程序博客网 时间:2024/05/19 03:26
一、打开Makefile文件:
itop_4412_android_config: unconfig
@$(MKCONFIG) $(@:_config=) arm arm_cortexa9 smdkc210 samsung s5pc210 //@:指的是当前target,也即itop_4412_android
OBJTREE := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR))
SRCTREE := $(CURDIR)
TOPDIR := $(SRCTREE)
LNDIR := $(OBJTREE)
export TOPDIR SRCTREE OBJTREE
MKCONFIG := $(SRCTREE)/mkconfig
export MKCONFIG //分析得出 MKCONFIG 其实为CURID/mkconfig,即为当前编译目录下的mkconfig文件路径
//转换出来就是 mkconfig itop_4412_android arm arm_cortexa9 smdkc210 samsung s5pc210
二、打开mkconfig文件
#!/bin/sh -e
# Script to create header files and links to configure
# U-Boot for a specific board.
#
# Parameters: Target Architecture CPU Board [VENDOR] [SOC]
#
# (C) 2002-2006 DENX Software Engineering, Wolfgang Denk <wd@denx.de>
#
APPEND=no # Default: Create new config file
BOARD_NAME="" # Name to print in make output
TARGETS=""
while [ $# -gt 0 ] ; do #如果 参数数量 > 0
case "$1" in
--) shift ; break ;;
-a) shift ; APPEND=yes ;;
-n) shift ; BOARD_NAME="${1%%_config}" ; shift ;;
-t) shift ; TARGETS="`echo $1 | sed 's:_: :g'` ${TARGETS}" ; shift ;;
*) break ;;
esac
done
[ "${BOARD_NAME}" ] || BOARD_NAME="$1"
[ $# -lt 4 ] && exit 1
[ $# -gt 6 ] && exit 1
if [ "${ARCH}" -a "${ARCH}" != "$2" ]; then
echo "Failed: \$ARCH=${ARCH}, should be '$2' for ${BOARD_NAME}" 1>&2
exit 1
fi
echo "Configuring for ${BOARD_NAME} board..."
#
# Create link to architecture specific headers
#
if [ "$SRCTREE" != "$OBJTREE" ] ; then
mkdir -p ${OBJTREE}/include
mkdir -p ${OBJTREE}/include2
cd ${OBJTREE}/include2
rm -f asm
ln -s ${SRCTREE}/include/asm-$2 asm
LNPREFIX="../../include2/asm/"
cd ../include
rm -rf asm-$2
rm -f asm
mkdir asm-$2
ln -s asm-$2 asm
else
cd ./include
rm -f asm
ln -s asm-$2 asm #链接asm->asm-arm
fi
rm -f asm-$2/arch #删除asm-arm/arch目录
if [ -z "$6" -o "$6" = "NULL" ] ; then
ln -s ${LNPREFIX}arch-$3 asm-$2/arch
else
ln -s ${LNPREFIX}arch-$6 asm-$2/arch # 链接asm-arm /arch-> arch-s5pc210
fi
if [ "$2" = "arm" ] ; then
rm -f asm-$2/proc#删除asm-arm/proc
ln -s ${LNPREFIX}proc-armv asm-$2/proc #链接asm-arm/proc->proc-armv
fi
#
# Create include file for Make
#
echo "ARCH = $2" > config.mk
echo "CPU = $3" >> config.mk
echo "BOARD = $4" >> config.mk
[ "$5" ] && [ "$5" != "NULL" ] && echo "VENDOR = $5" >> config.mk
[ "$6" ] && [ "$6" != "NULL" ] && echo "SOC = $6" >> config.mk
# Assign board directory to BOARDIR variable
if [ -z "$5" -o "$5" = "NULL" ] ; then
BOARDDIR=$4
else
BOARDDIR=$5/$4
fi
#
# Create board specific header file
#
if [ "$APPEND" = "yes" ] # Append to existing config file
then
echo >> config.h
else
> config.h # Create new config file
fi
echo "/* Automatically generated - do not edit */" >>config.h
for i in ${TARGETS} ; do
echo "#define CONFIG_MK_${i} 1" >>config.h ;
done
cat << EOF >> config.h
#define CONFIG_BOARDDIR board/$BOARDDIR
#include <config_defaults.h>
#include <configs/$1.h>
#include <asm/config.h>
EOF
exit 0
for i in ${TARGETS} ; do
echo "#define CONFIG_MK_${i} 1" >>config.h ;
done
cat << EOF >> config.h
#define CONFIG_BOARDDIR board/$BOARDDIR
#include <config_defaults.h>
#include <configs/$1.h>
#include <asm/config.h>
EOF
exit 0
# Script to create header files and links to configure
# U-Boot for a specific board.
#
# Parameters: Target Architecture CPU Board [VENDOR] [SOC]
#
# (C) 2002-2006 DENX Software Engineering, Wolfgang Denk <wd@denx.de>
#
APPEND=no # Default: Create new config file
BOARD_NAME="" # Name to print in make output
TARGETS=""
while [ $# -gt 0 ] ; do #如果 参数数量 > 0
case "$1" in
--) shift ; break ;;
-a) shift ; APPEND=yes ;;
-n) shift ; BOARD_NAME="${1%%_config}" ; shift ;;
-t) shift ; TARGETS="`echo $1 | sed 's:_: :g'` ${TARGETS}" ; shift ;;
*) break ;;
esac
done
[ "${BOARD_NAME}" ] || BOARD_NAME="$1"
[ $# -lt 4 ] && exit 1
[ $# -gt 6 ] && exit 1
if [ "${ARCH}" -a "${ARCH}" != "$2" ]; then
echo "Failed: \$ARCH=${ARCH}, should be '$2' for ${BOARD_NAME}" 1>&2
exit 1
fi
echo "Configuring for ${BOARD_NAME} board..."
#
# Create link to architecture specific headers
#
if [ "$SRCTREE" != "$OBJTREE" ] ; then
mkdir -p ${OBJTREE}/include
mkdir -p ${OBJTREE}/include2
cd ${OBJTREE}/include2
rm -f asm
ln -s ${SRCTREE}/include/asm-$2 asm
LNPREFIX="../../include2/asm/"
cd ../include
rm -rf asm-$2
rm -f asm
mkdir asm-$2
ln -s asm-$2 asm
else
cd ./include
rm -f asm
ln -s asm-$2 asm #链接asm->asm-arm
fi
rm -f asm-$2/arch #删除asm-arm/arch目录
if [ -z "$6" -o "$6" = "NULL" ] ; then
ln -s ${LNPREFIX}arch-$3 asm-$2/arch
else
ln -s ${LNPREFIX}arch-$6 asm-$2/arch # 链接asm-arm /arch-> arch-s5pc210
fi
if [ "$2" = "arm" ] ; then
rm -f asm-$2/proc#删除asm-arm/proc
ln -s ${LNPREFIX}proc-armv asm-$2/proc #链接asm-arm/proc->proc-armv
fi
#
# Create include file for Make
#
echo "ARCH = $2" > config.mk
echo "CPU = $3" >> config.mk
echo "BOARD = $4" >> config.mk
[ "$5" ] && [ "$5" != "NULL" ] && echo "VENDOR = $5" >> config.mk
[ "$6" ] && [ "$6" != "NULL" ] && echo "SOC = $6" >> config.mk
# Assign board directory to BOARDIR variable
if [ -z "$5" -o "$5" = "NULL" ] ; then
BOARDDIR=$4
else
BOARDDIR=$5/$4
fi
#
# Create board specific header file
#
if [ "$APPEND" = "yes" ] # Append to existing config file
then
echo >> config.h
else
> config.h # Create new config file
fi
echo "/* Automatically generated - do not edit */" >>config.h
for i in ${TARGETS} ; do
echo "#define CONFIG_MK_${i} 1" >>config.h ;
done
cat << EOF >> config.h
#define CONFIG_BOARDDIR board/$BOARDDIR
#include <config_defaults.h>
#include <configs/$1.h>
#include <asm/config.h>
EOF
exit 0
for i in ${TARGETS} ; do
echo "#define CONFIG_MK_${i} 1" >>config.h ;
done
cat << EOF >> config.h
#define CONFIG_BOARDDIR board/$BOARDDIR
#include <config_defaults.h>
#include <configs/$1.h>
#include <asm/config.h>
EOF
exit 0
阅读全文
0 0
- itop4412 uboot 学习详细记录四丶Exynos4412 编译Makefile的配置文件config.mk分析)
- itop4412 uboot 学习详细记录三丶Exynos4412 编译脚本build_uboot.sh分析)
- itop4412 uboot 学习详细记录(一丶Exynos4412 的启动)
- itop4412 uboot 学习详细记录(二丶Exynos4412 uboot的组成)
- uboot的Makefile分析之顶层config.mk
- UBoot顶层Makefile及config.mk确定的相关参数
- uboot根目录下的config.mk的分析
- Uboot Makefile详细分析
- uboot的编译过程分析---Makefile分析
- config.mk 文件详细分析
- u-boot的Makefile分析之顶层config.mk
- uboot 学习 Makefile分析
- 2. Uboot Makefile详细分析
- uboot根目录下的config.mk
- i.MX6DL学习记录---uboot之Makefile分析
- uboot移植:uboot下的config.mk解析
- Uboot的Makefile分析
- uboot的 MakeFile分析
- python list里面是dict时排序
- How to craw the Info of BiliBIli with python in Parallel
- CentOS 7.x下安装MySQL错误(ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password:)
- oracle like函数 介绍与优化
- 环信3.0自定义扩展消息
- itop4412 uboot 学习详细记录四丶Exynos4412 编译Makefile的配置文件config.mk分析)
- STM32使用SWO引脚调试
- 136.Single Number
- 简述:为什么硅胶按键要使用镭雕工艺?
- #研发解决方案介绍#Tracing(鹰眼)
- php读取目录及子目录下所有文件名的方法
- Spring framework(3):IoC(1) IoC 容器&上下文对象
- JavaWeb.三层框架.MVC
- HttpClient +JSOUP 代理 爬虫