通过xshell连接CentOS(6.8/7)问题汇总

来源:互联网 发布:怎么查看当前linux版本 编辑:程序博客网 时间:2024/06/10 03:20

一. 前言

写在前面:如果你安装的cent6.8镜像是live版,请尽快换成bin版本,live版重启所有配置都会恢复默认,谨记谨记,这可是血的教训啊!!!
我用的cent镜像文件 ==> “CentOS-6.8-x86_64-bin-DVD1.iso” && “CentOS-7-x86_64-Everything-1611.iso”

如果你注意到了上面我写的,你可能不会遇到这个问题,但我还是记录一下,需要的童鞋可以参考。

进入正题==> 要用xshell远程连接我们的Cent服务器,需要满足两个条件:
1. 关闭Cent防火墙/放行22端口(shell默认通过22端口进行访问);
2. 启动Cent服务端的ssh服务。

注:所有指令是在root用户下进行的;“关闭防火墙”和“放行22端口”二选一

二. CentOS6.8设置

  1. 关闭防火墙

    • 查看防火墙状态: service iptables status
    • 关闭防火墙: service iptables stop
    • 永久关闭防火墙(不建议,关闭后可在需要时打开): chkconfig iptables off
  2. 放行22端口

    • 检查iptables文件是否存在: cd /etc/sysconfig/ ls
      • 如果不存在:
        ①. 任意运行一条iptables防火墙规则配置命令: iptables -P OUTPUT ACCEPT
        ②. 对iptables服务进行保存: service iptables save
        ③. 重启iptables服务: service iptables restart
    • 放行22端口:
      编辑iptables文件: vi /etc/sysconfig/iptables
      增加这条规则,保存退出: -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT
      重启iptables服务: service iptables restart
      设置iptables自启动: chkconfig iptables on
  3. 启动Cent的ssh服务

    • 查看ssh状态: service sshd status
    • 如果ssh服务未启动,执行启动ssh服务: service sshd start
    • 设置sshd服务开机启动: chkconfig sshd on
  4. 关闭防火墙并启动ssh服务后
    通过 ssh localhost 命令测试一下本机通过ssh方式登录

  5. 利用xshell远程登录

三. CentOS7设置

注:1.cent7的服务启停相关指令有所改变;
2.CentOS 7.0默认使用的是firewall作为防火墙,使用iptables必须重新设置一下

  1. 关闭防火墙

    • 停止firewall: systemctl stop firewalld.service
    • 屏蔽firewall: systemctl mask firewalld.service
    • 禁止firewall开机启动: systemctl disable firewalld.service
  2. 放行22端口

    • 安装iptables服务: yum -y install iptables-services
    • 编辑iptables文件: vi /etc/sysconfig/iptables
      增加这条规则,保存退出: -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT
    • 重启iptables服务: systemctl restart iptables.service
    • 设置iptables自启动: systemctl enable iptables.service
  3. 启动Cent的ssh服务

    • 查看ssh状态: systemctl status sshd.service
    • 如果ssh服务未启动,执行启动ssh服务: systemctl start sshd.service
      注:这个命令开启ssh服务是暂时的,下次系统重启,不会启动ssh服务
    • 设置sshd服务开机启动: systemctl enable sshd.service
  4. 关闭防火墙并启动ssh服务后
    通过 ssh localhost 命令测试一下本机通过ssh方式登录

  5. 利用xshell远程登录

原创粉丝点击