澳规插脚测试AS/NZS 3112

澳规电源插座AS/NZS 3112:2011+A1: 2012检测；直插式澳规电源随机测试报告；CNAS资质授权认可SAA认证,批准和试验规范插塞和插座电源插座 AS/NZS3112:2011+A1: 2012

    AS/NZS 3112:2011/Amdt 1:2012（（AS/NZS 3112:2012））Approval and test specification - Plugs and socket-outlets澳洲插头插座标准-72 pages找到了答案
下载地址~！

   澳大利亚的插头插座是按澳大利亚和新西兰的AS/NZS 3112制造标准。用在澳大利亚，新西兰，斐济和巴布亚新几内亚等国家。插头和插座电气标准分为10A、15A和20A。插头的形式是扁三角的和中国标准类似，插脚排列方向相反。澳大利亚和新西兰的认证机构和测试机构是互相认可通用的。两国的插头检测标准也是一致的。

   澳規電源插插頭(SAA认证 |AS/NZS 3112)的標準規範?

SAA认证介绍

      澳大利亚国际标准公司(Standards Australia International Limited)是澳大利亚唯一的标准认证机构。该机构于1922年成立，当时名称为澳大利亚联邦工程标准协会，1929年更名为澳大利亚标准协会。随着业务的不断发展，1990年又增加了质量认证服务有限公司(Quality Assurance Services Pty Ltd)。1999年，该机构彻底放弃了协会性质，以公司形式注册至今。

批准和试验规范插塞和插座电源插座 AS/NZS3112:2011+A1: 2012

The plug matching the socket pictured on the left, used inAustralia,New Zealand,Fiji,Papua New GuineaandTokelau, has two flat pins forming an inverted V-shape plus an earthing pin. These flat blades measure 6.5 by 1.6 mm with the Active and Neutral pins of 17.35 mm in length set 30° to the vertical on a nominal pitch of 13.7 mm and the Earth pin being 20 mm in length.[1]A standard power outlet in Australia provides a nominal voltage of 230 volts at a maximum of 10 amps and always includes an earth connection. As in the UK, its outlets are individually switched for extra safety.[2]Argentinauses a similar plug, with pins 1 mm longer.

There are unearthed versions of theplugused with this outlet having only the two flat inverted V-aligned pins, without the Earthing pin. Such plugs are only to be used for devices where other safety standards are in use (e.g. double insulation) and these plugs are rated at a maximum of only 2.5 amps. They are not available separately but only integrally withpower cordsspecifically designed for the purpose.

A view of the Wiring Side of a typical dual power outlet is also shown on the right, together with an annotated view of the mechanism, without the front cover. (One "Rocker" switch has been disassembled to show its operation.)

关键词:澳洲，电源插头，AS/NZS3112