linux alsa pcm 播放声音
来源:互联网 发布:知乎 中国 军事 编辑:程序博客网 时间:2024/06/06 02:03
/**alsa play test*ALSA用户空间编译,ALSA驱动的声卡在用户空间,不宜直接使用*文件接口中,而应使用alsa-lib*打开---->设置参数--->读写音频数据 ALSA全部使用alsa-lib中的API*交叉编译*export LD_LIBRARY_PATH=$PWD:$LD_LIBRARY_PATH*arm-linux-gcc -o alsa_play alsa_play_test.c -L. -lasound*需要交叉编译后的libasound.so库的支持**/#include <stdio.h>#include <stdlib.h>#include "alsa/asoundlib.h"int main(int argc, char *argv[]){int i;int ret;int buf[128];unsigned int val; int dir=0;char *buffer;int size;snd_pcm_uframes_t frames; snd_pcm_uframes_t periodsize;snd_pcm_t *playback_handle;//PCM设备句柄pcm.hsnd_pcm_hw_params_t *hw_params;//硬件信息和PCM流配置if (argc != 2) {printf("error: alsa_play_test [music name]\n");exit(1);}printf("play song %s by wolf\n", argv[1]);FILE *fp = fopen(argv[1], "rb"); if(fp == NULL) return 0; fseek(fp, 100, SEEK_SET);//1. 打开PCM,最后一个参数为0意味着标准配置ret = snd_pcm_open(&playback_handle, "default", SND_PCM_STREAM_PLAYBACK, 0);if (ret < 0) {perror("snd_pcm_open");exit(1);}//2. 分配snd_pcm_hw_params_t结构体ret = snd_pcm_hw_params_malloc(&hw_params);if (ret < 0) {perror("snd_pcm_hw_params_malloc");exit(1);}//3. 初始化hw_paramsret = snd_pcm_hw_params_any(playback_handle, hw_params);if (ret < 0) {perror("snd_pcm_hw_params_any");exit(1);}//4. 初始化访问权限ret = snd_pcm_hw_params_set_access(playback_handle, hw_params, SND_PCM_ACCESS_RW_INTERLEAVED);if (ret < 0) {perror("snd_pcm_hw_params_set_access");exit(1);}//5. 初始化采样格式SND_PCM_FORMAT_U8,8位ret = snd_pcm_hw_params_set_format(playback_handle, hw_params, SND_PCM_FORMAT_U8);if (ret < 0) {perror("snd_pcm_hw_params_set_format");exit(1);}//6. 设置采样率,如果硬件不支持我们设置的采样率,将使用最接近的//val = 44100,有些录音采样频率固定为8KHzval = 8000;ret = snd_pcm_hw_params_set_rate_near(playback_handle, hw_params, &val, &dir);if (ret < 0) {perror("snd_pcm_hw_params_set_rate_near");exit(1);}//7. 设置通道数量ret = snd_pcm_hw_params_set_channels(playback_handle, hw_params, 2);if (ret < 0) {perror("snd_pcm_hw_params_set_channels");exit(1);}/* Set period size to 32 frames. */ frames = 32; periodsize = frames * 2; ret = snd_pcm_hw_params_set_buffer_size_near(playback_handle, hw_params, &periodsize); if (ret < 0) { printf("Unable to set buffer size %li : %s\n", frames * 2, snd_strerror(ret)); } periodsize /= 2; ret = snd_pcm_hw_params_set_period_size_near(playback_handle, hw_params, &periodsize, 0); if (ret < 0) { printf("Unable to set period size %li : %s\n", periodsize, snd_strerror(ret)); } //8. 设置hw_paramsret = snd_pcm_hw_params(playback_handle, hw_params);if (ret < 0) {perror("snd_pcm_hw_params");exit(1);} /* Use a buffer large enough to hold one period */ snd_pcm_hw_params_get_period_size(hw_params, &frames, &dir); size = frames * 2; /* 2 bytes/sample, 2 channels */ buffer = (char *) malloc(size); fprintf(stderr, "size = %d\n", size); while (1) { ret = fread(buffer, 1, size, fp); if(ret == 0) { fprintf(stderr, "end of file on input\n"); break; } else if (ret != size) { }//9. 写音频数据到PCM设备 while(ret = snd_pcm_writei(playback_handle, buffer, frames)<0) { usleep(2000); if (ret == -EPIPE) { /* EPIPE means underrun */ fprintf(stderr, "underrun occurred\n"); //完成硬件参数设置,使设备准备好 snd_pcm_prepare(playback_handle); } else if (ret < 0) { fprintf(stderr, "error from writei: %s\n", snd_strerror(ret)); } } }//10. 关闭PCM设备句柄snd_pcm_close(playback_handle);return 0;}
阅读全文
0 0
- linux alsa pcm 播放声音
- linux alsa pcm 播放声音
- linux alsa pcm 播放声音
- linux下ALSA播放声音的源程序
- linux下ALSA播放声音的源程序
- alsa 无噪音播放pcm
- Linux下使用ALSA来播放声音 - 基本使用方法
- 基于alsa驱动架构的pcm播放
- 【Alsa】播放声音和录音详细流程
- Linux声音系统 ALSA OSS
- linux alsa 声音录播详解
- linux命令行播放声音
- linux下ALSA录制声音的源程序
- ALSA编程细节分析---Linux 声音调节
- 一种linux声音解决方案ALSA+pauseaudio
- manjaro linux(archlinux)alsa没有声音解决方法
- alsa与oss声音播放例程及对比
- Linux ALSA声卡驱动之三:PCM设备的创建
- chat
- 去标题的
- Design 一
- PullToRefreshScrollView和listview的冲突
- webView
- linux alsa pcm 播放声音
- java 同步锁
- Design 二: TabLayout + ViewPager +Fragment
- andriod——Retrofit+Fresco+MVP+Fragment自定义动画3秒跳转
- 购物车6 增删查
- opengl 独立着色器对象的使用
- 记
- 各种布局
- Design 三: NavigationView + DrawerLayout