tslib-1.4的问题
来源:互联网 发布:电信光猫绑定mac地址 编辑:程序博客网 时间:2024/05/17 06:33
tslib-1.4的问题
在为QTE4.5.1打上补丁后,我编译通过了,但是板上运行./helloworld -qws终端就会报如下的错误,呵呵,请问大家有没有遇见过,请指点,感谢
GCC-4.1.1
Could not read calibration: "/etc/pointercal"
No raw modules loaded.
QWSTslibMouseHandlerPrivate: ts_config() failed with error: 'No such file or directory'
Please check your tslib installation
根据意思来看的话应该是没有校准的配置文件,那后面几句是什么意思?
运行tslib-1.4/bin/ts_calibrate时则会出现以下错误
No raw modules loaded.
ts_config: No such file or directory
点击触摸屏没有反应
是我的环境变量出问题了吗?
环境变量如下:
export LD_LIBRARY_PATH=/nand1/tslib-1.4/lib:/lib:/nand1/Trolltech/QtEmbeddedARMT
export QTDIR=/nand1/Trolltech/QtEmbeddedARMTSLib/
export PATH=/bin:$QTDIR/bin:/nand1/tslib-1.4/bin:$PATH
export set QWS_MOUSE_PROTO=Tslib:/dev/event1
export QWS_DISPLAY="LinuxFb:mmWidth50:mmHeight70:0"
export QWS_DISPLAY=LinuxFb:/dev/fb2
export QWS_SIZE=480x272
export QT_ONSCREEN_PAINT=0
export QWS_SW_CURSOR=1
export QT_QWS_FONTDIR=/nand1/Trolltech/QtEmbeddedARMTSLib/lib/fonts
export QT_QWS_PLUGINDIR=/nand1/Trolltech/QtEmbeddedARMTSLib/plugins
export TSLIB_TSDEVICE=/dev/event1
export TSLIB_CONFFILE=/nand1/tslib-1.4/etc/ts.conf
export TSLIB_FBDEVICE=/dev/fb2
export TSLIB_CALIBFILE=/etc/pointercal
export TSLIB_PLUGINDIR=/nand1/tslib-1.4/lib/ts
我猜想是不是export TSLIB_CONFFILE=/nand1/tslib-1.4/etc/ts.conf 这个文件找不到?
大家帮我想想办法
GCC-4.1.1
Could not read calibration: "/etc/pointercal"
No raw modules loaded.
QWSTslibMouseHandlerPrivate: ts_config() failed with error: 'No such file or directory'
Please check your tslib installation
根据意思来看的话应该是没有校准的配置文件,那后面几句是什么意思?
运行tslib-1.4/bin/ts_calibrate时则会出现以下错误
No raw modules loaded.
ts_config: No such file or directory
点击触摸屏没有反应
是我的环境变量出问题了吗?
环境变量如下:
export LD_LIBRARY_PATH=/nand1/tslib-1.4/lib:/lib:/nand1/Trolltech/QtEmbeddedARMT
export QTDIR=/nand1/Trolltech/QtEmbeddedARMTSLib/
export PATH=/bin:$QTDIR/bin:/nand1/tslib-1.4/bin:$PATH
export set QWS_MOUSE_PROTO=Tslib:/dev/event1
export QWS_DISPLAY="LinuxFb:mmWidth50:mmHeight70:0"
export QWS_DISPLAY=LinuxFb:/dev/fb2
export QWS_SIZE=480x272
export QT_ONSCREEN_PAINT=0
export QWS_SW_CURSOR=1
export QT_QWS_FONTDIR=/nand1/Trolltech/QtEmbeddedARMTSLib/lib/fonts
export QT_QWS_PLUGINDIR=/nand1/Trolltech/QtEmbeddedARMTSLib/plugins
export TSLIB_TSDEVICE=/dev/event1
export TSLIB_CONFFILE=/nand1/tslib-1.4/etc/ts.conf
export TSLIB_FBDEVICE=/dev/fb2
export TSLIB_CALIBFILE=/etc/pointercal
export TSLIB_PLUGINDIR=/nand1/tslib-1.4/lib/ts
我猜想是不是export TSLIB_CONFFILE=/nand1/tslib-1.4/etc/ts.conf 这个文件找不到?
大家帮我想想办法
顶端Posted: 2009-06-16 11:03 | [楼 主]
小 中 大引用 推荐 编辑只看复制
我的是
export T_ROOT=/opt/tslib
export TSLIB_CONSOLEDEVICE=none
export TSLIB_FBDEVICE=/dev/fb0
export TSLIB_TSDEVICE=/dev/input/event0
export TSLIB_PLUGINDIR=$T_ROOT/lib/ts
export TSLIB_CONFFILE=$T_ROOT/etc/ts.conf
export TSLIB_CALIBFILE=$T_ROOT/etc/pointercal
export QTDIR=/opt/qt4.5
export LD_LIBRARY_PATH=$QTDIR/lib:$OPIEDIR/lib:/opt/tslib/lib
export PATH=$QTDIR/lib:$OPIEDIR/bin:$PATH
export QT_QWS_FONTDIR=/opt/qt4.5/lib/fonts
export QWS_MOUSE_PROTO='TSLIB:/dev/input/event0'
export QWS_DISPLAY="LinuxFb:mmWidth320:mmHeight200:0"
export T_ROOT=/opt/tslib
export TSLIB_CONSOLEDEVICE=none
export TSLIB_FBDEVICE=/dev/fb0
export TSLIB_TSDEVICE=/dev/input/event0
export TSLIB_PLUGINDIR=$T_ROOT/lib/ts
export TSLIB_CONFFILE=$T_ROOT/etc/ts.conf
export TSLIB_CALIBFILE=$T_ROOT/etc/pointercal
export QTDIR=/opt/qt4.5
export LD_LIBRARY_PATH=$QTDIR/lib:$OPIEDIR/lib:/opt/tslib/lib
export PATH=$QTDIR/lib:$OPIEDIR/bin:$PATH
export QT_QWS_FONTDIR=/opt/qt4.5/lib/fonts
export QWS_MOUSE_PROTO='TSLIB:/dev/input/event0'
export QWS_DISPLAY="LinuxFb:mmWidth320:mmHeight200:0"
顶端Posted: 2009-06-16 11:09 | 1 楼
小 中 大引用 推荐 编辑只看复制
从你这里我看不出什么啊,我的问题好奇怪啊。。。。。。。。。
顶端Posted: 2009-06-16 11:30 | 2 楼
小 中 大引用 推荐 编辑只看复制
我知道可能是什么问题了,是tslib-1.4/etc/ts.config的配置问题,呵呵
我看了一下里面的内容,有h3600,input等等,现在我的触摸屏设备是/dev/event1或者/dev/event0我郁闷了,ts.config里面没有event参数啊,选用input 跑程序时,报SIGSEGV错,晕了,大家帮帮忙啊
我看了一下里面的内容,有h3600,input等等,现在我的触摸屏设备是/dev/event1或者/dev/event0我郁闷了,ts.config里面没有event参数啊,选用input 跑程序时,报SIGSEGV错,晕了,大家帮帮忙啊
顶端Posted: 2009-06-16 12:40 | 3 楼
小 中 大引用 推荐 编辑只看复制
我在/dev/下建立了一个input目录,然后做了链接 ln -s /dev/event1 /dev/input/event1, ln -s /dev/event0 /dev/input/event0,修改ts.config 选用input项,但是还是会有
/nand1/tslib-1.4/bin> ./ts_calibrate
SIGSEGV
大家帮帮帮忙吧
/nand1/tslib-1.4/bin> ./ts_calibrate
SIGSEGV
大家帮帮帮忙吧
顶端Posted: 2009-06-16 15:35 | 4 楼
小 中 大引用 推荐 编辑只看复制
请把你的/nand1/tslib-1.4/etc/ts.conf文件的内容贴出来。
同时请把你/nand1/tslib-1.4/lib/ts目录下的文件列表贴出来看看。
ts.conf文件中应该有一行
module_raw input
/nand1/tslib-1.4/lib/ts目录下应该有个文件叫
input.so
同时请把你/nand1/tslib-1.4/lib/ts目录下的文件列表贴出来看看。
ts.conf文件中应该有一行
module_raw input
/nand1/tslib-1.4/lib/ts目录下应该有个文件叫
input.so
顶端Posted: 2009-06-16 16:15 | 5 楼
小 中 大引用 推荐 编辑只看复制
好吧,我搞的仔细一点,请大家帮帮忙
ts.conf的内容是
# Uncomment if you wish to use the linux input layer event interface
module_raw input
# Uncomment if you're using a Sharp Zaurus SL-5500/SL-5000d
# module_raw collie
# Uncomment if you're using a Sharp Zaurus SL-C700/C750/C760/C860
# module_raw corgi
# Uncomment if you're using a device with a UCB1200/1300/1400 TS interface
# module_raw ucb1x00
# Uncomment if you're using an HP iPaq h3600 or similar
# module_raw h3600
# Uncomment if you're using a Hitachi Webpad
# module_raw mk712
# Uncomment if you're using an IBM Arctic II
# module_raw arctic2
module pthres pmin=1
module variance delta=30
module dejitter delta=100
module linear
/nand1/tslib-1.4/lib/ts目录下应该的确有个文件叫
input.so的库
同时我做了mknod /dev/input/event1 c 13 65
cat /dev/inpput/event1 点击触摸屏终端有打印输出
我的/etc/profile中的内容如下
#!/bin/sh
DISPLAY=unit:100.100
HOME=/tmp
SHELL=/bin/sh
mknod /dev/input/event1 c 13 65
export T_ROOT=/nand1/tslib-1.4
export TSLIB_CONSOLEDEVICE=none
export TSLIB_FBDEVICE=/dev/fb2
export TSLIB_TSDEVICE=/dev/input/event1
export TSLIB_PLUGINDIR=$T_ROOT/lib/ts
export TSLIB_CONFFILE=$T_ROOT/etc/ts.conf
export TSLIB_CALIBFILE=$T_ROOT/etc/pointercal
export QTDIR=/nand1/Trolltech/QtEmbeddedARMTSLib
export LD_LIBRARY_PATH=$QTDIR/lib:/nand1/tslib-1.4/lib:$LD_LIBRARY_PATH
export PATH=$QTDIR/bin:$T_ROOT/bin:$PATH
export QT_QWS_FONTDIR=$QTDIR/lib/fonts
export QWS_MOUSE_PROTO='Tslib:/dev/input/event1'
export QWS_DISPLAY="LinuxFb:mmWidth320:mmHeight200:0"
export QWS_SIZE=480x272
./nand1/tslib-1.4/bin/ts_calibrate
报SIGSEGV错,请大家帮帮忙
谢谢
同时cat /proc/bus/input/devices
I: Bus=0000 Vendor=0000 Product=0000 Version=0001
N: Name="telechips keypad"
P: Phys=tcc-keypad
S: Sysfs=/class/input/input0
U: Uniq=
H: Handlers=kbd event0
B: EV=3
B: KEY=ffe
I: Bus=0000 Vendor=0000 Product=0000 Version=0001
N: Name="tcc-tsc2003-ts"
P: Phys=tsc2003/input0
S: Sysfs=/class/input/input1
U: Uniq=
H: Handlers=mouse0 event1
B: EV=b
B: KEY=400 0 0 0 0 0 0 0 0 0 0
B: ABS=1000003
同时在内核源码的document/device.txt中
13 char Input core
0 = /dev/input/js0 First joystick
1 = /dev/input/js1 Second joystick
...
32 = /dev/input/mouse0 First mouse
33 = /dev/input/mouse1 Second mouse
...
63 = /dev/input/mice Unified mouse
64 = /dev/input/event0 First event queue
65 = /dev/input/event1 Second event queue
我实在没想法了,理论上应该对啊
ts.conf的内容是
# Uncomment if you wish to use the linux input layer event interface
module_raw input
# Uncomment if you're using a Sharp Zaurus SL-5500/SL-5000d
# module_raw collie
# Uncomment if you're using a Sharp Zaurus SL-C700/C750/C760/C860
# module_raw corgi
# Uncomment if you're using a device with a UCB1200/1300/1400 TS interface
# module_raw ucb1x00
# Uncomment if you're using an HP iPaq h3600 or similar
# module_raw h3600
# Uncomment if you're using a Hitachi Webpad
# module_raw mk712
# Uncomment if you're using an IBM Arctic II
# module_raw arctic2
module pthres pmin=1
module variance delta=30
module dejitter delta=100
module linear
/nand1/tslib-1.4/lib/ts目录下应该的确有个文件叫
input.so的库
同时我做了mknod /dev/input/event1 c 13 65
cat /dev/inpput/event1 点击触摸屏终端有打印输出
我的/etc/profile中的内容如下
#!/bin/sh
DISPLAY=unit:100.100
HOME=/tmp
SHELL=/bin/sh
mknod /dev/input/event1 c 13 65
export T_ROOT=/nand1/tslib-1.4
export TSLIB_CONSOLEDEVICE=none
export TSLIB_FBDEVICE=/dev/fb2
export TSLIB_TSDEVICE=/dev/input/event1
export TSLIB_PLUGINDIR=$T_ROOT/lib/ts
export TSLIB_CONFFILE=$T_ROOT/etc/ts.conf
export TSLIB_CALIBFILE=$T_ROOT/etc/pointercal
export QTDIR=/nand1/Trolltech/QtEmbeddedARMTSLib
export LD_LIBRARY_PATH=$QTDIR/lib:/nand1/tslib-1.4/lib:$LD_LIBRARY_PATH
export PATH=$QTDIR/bin:$T_ROOT/bin:$PATH
export QT_QWS_FONTDIR=$QTDIR/lib/fonts
export QWS_MOUSE_PROTO='Tslib:/dev/input/event1'
export QWS_DISPLAY="LinuxFb:mmWidth320:mmHeight200:0"
export QWS_SIZE=480x272
./nand1/tslib-1.4/bin/ts_calibrate
报SIGSEGV错,请大家帮帮忙
谢谢
同时cat /proc/bus/input/devices
I: Bus=0000 Vendor=0000 Product=0000 Version=0001
N: Name="telechips keypad"
P: Phys=tcc-keypad
S: Sysfs=/class/input/input0
U: Uniq=
H: Handlers=kbd event0
B: EV=3
B: KEY=ffe
I: Bus=0000 Vendor=0000 Product=0000 Version=0001
N: Name="tcc-tsc2003-ts"
P: Phys=tsc2003/input0
S: Sysfs=/class/input/input1
U: Uniq=
H: Handlers=mouse0 event1
B: EV=b
B: KEY=400 0 0 0 0 0 0 0 0 0 0
B: ABS=1000003
同时在内核源码的document/device.txt中
13 char Input core
0 = /dev/input/js0 First joystick
1 = /dev/input/js1 Second joystick
...
32 = /dev/input/mouse0 First mouse
33 = /dev/input/mouse1 Second mouse
...
63 = /dev/input/mice Unified mouse
64 = /dev/input/event0 First event queue
65 = /dev/input/event1 Second event queue
我实在没想法了,理论上应该对啊
顶端Posted: 2009-06-16 18:16 | 6 楼
小 中 大引用 推荐 编辑只看复制
补充:
:/nand1/tslib-1.4/lib/ts> ls
arctic2.la dejitter.la linear.la pthres.la
arctic2.so dejitter.so linear.so pthres.so
collie.la h3600.la linear_h2200.la ucb1x00.la
collie.so h3600.so linear_h2200.so ucb1x00.so
corgi.la input.la mk712.la variance.la
corgi.so input.so mk712.so variance.so
同时:
alb ndda tty16 tty47
apm_bios ndda1 tty17 tty48
bl ndda2 tty18 tty49
console ndda3 tty19 tty5
controlC0 ndda4 tty2 tty50
dsp null tty20 tty51
dsp0 pcmC0D0c tty21 tty52
event0 pcmC0D0p tty22 tty53
event1 ptmx tty23 tty54
fb0 pts tty24 tty55
fb1 pwr tty25 tty56
fb2 ram0 tty26 tty57
full ram1 tty27 tty58
gadget random tty28 tty59
i2c-0 rtc tty29 tty6
i2c-1 rtc0 tty3 tty60
input shm tty30 tty61
intr-mb spidev0.0 tty31 tty62
intr-sc spidev1.0 tty32 tty63
intr-test tcc-uart0 tty33 tty7
kmem tcc-uart1 tty34 tty8
kmsg tcc-uart2 tty35 tty9
loop0 tcc-uart3 tty36 ttySAC0
loop1 timer tty37 ttySAC1
loop2 tsif tty38 ttySAC2
loop3 tty tty39 ttySAC3
loop4 tty0 tty4 ttySACX
loop5 tty1 tty40 urandom
loop6 tty10 tty41 usb1
loop7 tty11 tty42 usbdev1.1_ep00
mem tty12 tty43 usbdev1.1_ep81
mice tty13 tty44 vcs
mixer tty14 tty45 vcsa
mouse0 tty15 tty46 zero
在/dev/下有event0和event1
之后我建了input目录,之后又创建了节点mknod /dev/input/event1 c 13 65
帮帮忙啊,小弟完全晕了
:/nand1/tslib-1.4/lib/ts> ls
arctic2.la dejitter.la linear.la pthres.la
arctic2.so dejitter.so linear.so pthres.so
collie.la h3600.la linear_h2200.la ucb1x00.la
collie.so h3600.so linear_h2200.so ucb1x00.so
corgi.la input.la mk712.la variance.la
corgi.so input.so mk712.so variance.so
同时:
alb ndda tty16 tty47
apm_bios ndda1 tty17 tty48
bl ndda2 tty18 tty49
console ndda3 tty19 tty5
controlC0 ndda4 tty2 tty50
dsp null tty20 tty51
dsp0 pcmC0D0c tty21 tty52
event0 pcmC0D0p tty22 tty53
event1 ptmx tty23 tty54
fb0 pts tty24 tty55
fb1 pwr tty25 tty56
fb2 ram0 tty26 tty57
full ram1 tty27 tty58
gadget random tty28 tty59
i2c-0 rtc tty29 tty6
i2c-1 rtc0 tty3 tty60
input shm tty30 tty61
intr-mb spidev0.0 tty31 tty62
intr-sc spidev1.0 tty32 tty63
intr-test tcc-uart0 tty33 tty7
kmem tcc-uart1 tty34 tty8
kmsg tcc-uart2 tty35 tty9
loop0 tcc-uart3 tty36 ttySAC0
loop1 timer tty37 ttySAC1
loop2 tsif tty38 ttySAC2
loop3 tty tty39 ttySAC3
loop4 tty0 tty4 ttySACX
loop5 tty1 tty40 urandom
loop6 tty10 tty41 usb1
loop7 tty11 tty42 usbdev1.1_ep00
mem tty12 tty43 usbdev1.1_ep81
mice tty13 tty44 vcs
mixer tty14 tty45 vcsa
mouse0 tty15 tty46 zero
在/dev/下有event0和event1
之后我建了input目录,之后又创建了节点mknod /dev/input/event1 c 13 65
帮帮忙啊,小弟完全晕了
顶端Posted: 2009-06-16 18:30 | 7 楼
小 中 大引用 推荐 编辑只看复制
我给你找到原因了,确定的原因,呵呵:)
你把
/root/qt/tslib/etc/ts.conf
的
# Uncomment if you wish to use the linux input layer event interface
module_raw input
中module_raw input前面的空格去掉就可以了。
这个问题我验证过。有兴趣的话具体你看tslib的源代码吧。
我的blog是kjpioo.cublog.cn。欢迎和我交流哈。。
你把
/root/qt/tslib/etc/ts.conf
的
# Uncomment if you wish to use the linux input layer event interface
module_raw input
中module_raw input前面的空格去掉就可以了。
这个问题我验证过。有兴趣的话具体你看tslib的源代码吧。
我的blog是kjpioo.cublog.cn。欢迎和我交流哈。。
顶端Posted: 2009-06-20 21:36 | 8 楼
小 中 大引用 推荐 编辑只看复制
http://blog.chinaunix.net/u2/61322/showart_1357736.html
http://blog.chinaunix.net/u2/61322/showart_1313716.html
这是我之前碰到这个问题的记录。今天我把你的问题验证了一下。
http://blog.chinaunix.net/u2/61322/showart_1313716.html
这是我之前碰到这个问题的记录。今天我把你的问题验证了一下。
- tslib-1.4的问题
- tslib-1.4的移植
- Tslib-1.4的移植
- Tslib-1.4的嵌入式移植
- tslib移植出现的小问题
- 终于解决Tslib的问题了
- 6410上的TSLIB移植问题
- 解决TSLIB无法识别触摸屏的问题
- Qt 不能响应Tslib输入的问题
- Linux下tslib交叉编译的问题
- tslib移植出现的小问题
- tslib-1.4的安装与移植
- tslib-1.4的安装与移植
- tslib-1.4的安装与移植
- tslib-1.4的安装与移植
- tslib-1.4的移植和应用
- tslib-1.4的安装与移植
- tslib-1.4的安装与移植
- 程序员必须知道的命令行
- 在U盘上运行SharpDevelop.jpg
- 网站性能——注册登录验证码
- system()函数
- .NET企业应用开发框架Spring.NET
- tslib-1.4的问题
- lwip--有趣的数组定义(预处理)
- 非常优秀的.NET框架Castle
- 每日一句 2009 06 29
- 国产.net开源博客x3blog
- 看实例学正则表达式
- 关于Spring job的配置的资料
- web developer tips (11):在Visual Web Developer中用不同的工具窗口打开样式生成器
- 明星QQ