重烧内核之后初始化失败

来源：互联网发布：revit软件下载编辑：程序博客网时间：2024/05/11 17:06

正常情况下串口的信息：
INFO: CReg2440Uart::CReg2440Uart using processor frequency reported by the OAL (66666666).
INFO: CReg2440Uart::CReg2440Uart using processor frequency reported by the OAL (66666666).
INFO: WAVEDEV.DLL: SetI2SClockRate: Using processor frequency reported by the OAL (66666666).
Prescaler:3
CIS_Init----
Cam_Init----
Camera I/F Reset
CAM clock:24000000
CamClockOn = 1
Camera Module Reset
Use IIC for initialization
ID=0x96
ID=0x96
ID=0x96
ID=0x96
ID=0x96
CAMERA.DLL::InterruptThread Initialized.
现在进不了系统了，停在这里：
INFO: CReg2440Uart::CReg2440Uart using processor frequency reported by the OAL (66666666).
INFO: CReg2440Uart::CReg2440Uart using processor frequency reported by the OAL (66666666).

也不知道出什么问题了，这两天一直在编译烧内核，有时成功有时就卡在这里了，不知道是不是我改动的原因，还在编译，明天继续试。