设备驱动中环形缓冲区数据存储和读写同步的实现［转自：http://hi.baidu.com/whandsome/blog/item/3834e32a9994692cd52af1f9.html］

 

设备驱动中环形缓冲区数据存储和读写同步的实现

先通过自定义数据结构，对缓冲区做几个基本的指针和参数进行定义：

char * buffer_start, *buffer_end                  指向buffer起始端和结束端的指针

char *wp ,*rp                                                   数据的读写指针

int buffersize                                                    buffer大小

调用内存分配函数kmalloc函数，为该数据结构申请内存空间，初始化结束后，数据的读写指针都指向char *buffer_star，对于缓冲区，我们可以做一下几个rules:

1. *wp = *rp ：这个数据缓冲区是空的。对于读操作，遇到这种情况读操作应该会被阻塞，无数据可读，读进程进入睡眠等待状态；对于写操作，写睡眠将被唤醒，可写入的大小为整个buffer空间的大小

2. *wp > *rp ：缓冲区有数据可读，可读大小为wp-rp，读进程不会不会被阻塞，而wp-rp=buffersize时，写进程被阻塞进入睡眠，若wp-rp<buffersize时，写进程不会被阻塞，buffer还有空间可以写入

3. *wp< *rp： 如果wp rp指向buffer_end的时候，会自动反转到buffer_start位置，可写空间为rp-wp-1

通过阻塞和睡眠机制，我们可以实现对这个buffer的读写的同步，下面还是以代码的方式讲解一下读写同步的原理：

static ssize_t scull_p_read (struct file *filp, char __user *buf, size_t count,
                 loff_t *f_pos)
{
struct scull_pipe *dev = filp->private_data;

if (down_interruptible(&dev->sem))                                               锁定信号量
   return -ERESTARTSYS;

while (dev->rp == dev->wp) { /* nothing to read */                       此时缓冲区为空，无数据可读
   up(&dev->sem); /* release the lock */                                          /*解锁信号量，注意：必须在进入阻塞睡眠之前解 锁信号量，准备进入睡眠*/
   if (filp->f_flags & O_NONBLOCK)
    return -EAGAIN;
   PDEBUG("/"%s/" reading: going to sleep/n", current->comm);
   if (wait_event_interruptible(dev->inq, (dev->rp != dev->wp)))      /* 阻塞，进入睡眠，当dev->rp != dev->wp这个条件被满足的时候，唤醒睡眠，这个睡眠应 该    在 写操作中被唤醒*/
    return -ERESTARTSYS; /* signal: tell the fs layer to handle it */
   /* otherwise loop, but first reacquire the lock */
   if (down_interruptible(&dev->sem))                                          /* 如果被唤醒，则重新锁定信号量，进行数据读取*/
    return -ERESTARTSYS;
}
/* ok, data is there, return something */
if (dev->wp > dev->rp)
   count = min(count, (size_t)(dev->wp - dev->rp));
else /* the write pointer has wrapped, return data up to dev->end */
   count = min(count, (size_t)(dev->end - dev->rp));
if (copy_to_user(buf, dev->rp, count)) {    /*i在rp>wp情况下，本次操作不能一次性读取buffer里面所有的数据*/
   up (&dev->sem);                                         /*必须分两次读取，第一次只读到end-rp,第二次读到wp-start*/
   return -EFAULT;
}
dev->rp += count;                                /*count值已经被处理过，保证dev->rp += count不会超过buffer_end*/

if (dev->rp == dev->end)
   dev->rp = dev->buffer; /* wrapped */
up (&dev->sem);

/* finally, awake any writers and return */
wake_up_interruptible(&dev->outq);               /*读取结束后完成指针的更新，唤醒写睡眠*/
PDEBUG("/"%s/" did read %li bytes/n",current->comm, (long)count);
return count;
}

static ssize_t scull_p_write(struct file *filp, const char __user *buf, size_t count,
                 loff_t *f_pos)
{
struct scull_pipe *dev = filp->private_data;
int result;

if (down_interruptible(&dev->sem))
   return -ERESTARTSYS;

/* Make sure there's space to write */
result = scull_getwritespace(dev, filp);                  /*测试是否还有可写入的空间*/
if (result)
   return result; /* scull_getwritespace called up(&dev->sem) */

/* ok, space is there, accept something */
count = min(count, (size_t)spacefree(dev));                 /*如果有，察看还有多少空间可写*/
if (dev->wp >= dev->rp)
   count = min(count, (size_t)(dev->end - dev->wp)); /* to end-of-buf */   /*似乎还有一小段空间没有写入*/
else /* the write pointer has wrapped, fill up to rp-1 */
   count = min(count, (size_t)(dev->rp - dev->wp - 1));
PDEBUG("Going to accept %li bytes to %p from %p/n", (long)count, dev->wp, buf);
if (copy_from_user(dev->wp, buf, count)) {
   up (&dev->sem);
   return -EFAULT;
}
dev->wp += count;
if (dev->wp == dev->end)
   dev->wp = dev->buffer; /* wrapped */                      /*更新写指针*/
up(&dev->sem);

/* finally, awake any reader */
wake_up_interruptible(&dev->inq);   /*写完之后必定有数据可读，唤醒读睡眠*/

/* and signal asynchronous readers, explained late in chapter 5 */
if (dev->async_queue)
   kill_fasync(&dev->async_queue, SIGIO, POLL_IN);
PDEBUG("/"%s/" did write %li bytes/n",current->comm, (long)count);
return count;