internet explorer cannot display image picture from google group?我的问题就这么解决了View > Encoding >
来源:互联网 发布:阿里云如何重装系统 编辑:程序博客网 时间:2024/04/29 19:32
Best Answer - Chosen by Voters
Pictures Are Not Displayed on Web Sites in Internet Explorer
View products that this article applies to.
Article ID : 283807
Last Review : February 17, 2006
Revision : 6.0
This article was previously published under Q283807
SYMPTOMS
When you open a Web page, one or more pictures (graphics or images) may not be displayed. Instead, a red X, or a placeholder, may appear in place of the images.
Back to the top
CAUSE
This behavior can occur if one of the following conditions is true: • The Web page includes an image type that is not supported by Internet Explorer.
• The Show Pictures check box is not selected on the Advanced tab of the Internet Options dialog box, or the Toggle Images.exe Web accessory was used to disable images in Internet Explorer.
• The image is displayed based on a script, ActiveX control, cookie, Java applet, or HTTP referral information, and your computer or network is configured to block one or more of these features. For example, you may have Internet Explorer or Symantec Corporation's Norton Internet Security (NIS) or Norton Personal Firewall (NPF) 2002 configured to block one or more of these features.
• Internet Explorer cannot determine the character set (also called code page or encoding) that is used by the Web page, or a file or registry key required to display the Web page with the appropriate character set may be missing or damaged. By default, Internet Explorer uses the character set that is specified in the HTTP content type that is returned by the server, the character set specified by the meta element in the Web page document, or your Encoding preference if no HTTP content type is returned by the server and no meta element is specified in the Web page document.
Back to the top
RESOLUTION
To troubleshoot this issue, follow these steps. After each step, check to see if the issue is resolved. If the issue still occurs, continue troubleshooting with the next step: 1. Right-click the red X or placeholder for the image, and then click Properties. Verify that the image type is supported by Internet Explorer by examining the Type or Address (URL) values in the Properties dialog box. For example, a Graphics Interchange Format (GIF) file will list GIF Image for Type and the Address (URL) ends with .gif. Internet Explorer displays images with an .art, .wmf, .emf, .png, .mov, .xbm, .avi, .mpg, .gif, .jpg, .mpeg, and .bmp extensions.
2. Start Internet Explorer.
3. If you have the Toggle Images.exe Web accessory installed, click the Toggle Images.exe link on the Links toolbar to turn on images.
Note If the Links toolbar is not visible, right-click a blank area of the toolbar and verify that there is a check next to Links. If the Toggle Images.exe link is not visible on the Links toolbar, click the arrow with two angle brackets on the far right-side of the Links toolbar.
4. Verify that Show Pictures has not been turned off in Internet Explorer: a. On the Tools menu, click Internet Options.
b. Click the Advanced tab, and then verify that the Show Pictures check box is selected under Multimedia.
c. Click OK.
5. Make sure scripting, ActiveX controls, cookies, and Java applets are enabled in Internet Explorer. To do so, follow these steps: a. On the Tools menu, click Internet Options.
b. Click the Security tab, and then click Default Level (if it is available) for the zone which contains the Web page (for example, Internet).
c. If you are using Internet Explorer 6, click the Privacy tab, and then click Default (if it is available).
6. If you are using a third-party Internet security, firewall, or cookie blocking program, contact the manufacturer of the program for information about how to enable scripting, ActiveX controls, cookies, Java applets, advertisements, and HTTP referral information. For example, if you have Norton Internet Security (NIS) or Norton Personal Firewall (NPF) installed, see the following Symantec Corporation Web sites for additional information about the various settings in these products that might cause this behavior: • http://service1.symantec.com/SUPPORT/sun… (http://service1.symantec.com/SUPPORT/sun…
• http://service1.symantec.com/SUPPORT/nip… (http://service1.symantec.com/SUPPORT/nip…
If you access the Internet through a local area network (LAN), contact the administrator of your LAN to verify that scripting, ActiveX controls, cookies, Java applets, advertisements, and HTTP referral information are not blocked by a firewall or other security features on the network.
7. Start Internet Explorer.
8. On the View menu, point to Encoding. If a check does not appear next to Auto-Select, click Auto-Select.
9. On the View menu, point to Encoding, and then click the appropriate language for the Web page that you are trying to view. For example, if the Web page is in English (United States), click Western European (ISO) or Western European (Windows). If the required language is not available on the View menu, follow these steps to add it: a. On the Tools menu, click Internet Options.
b. Click Languages, and then click Add.
c. Click the appropriate language, and then click OK.
10. If the problem is not resolved, a file or registry key required to display the Web page with the appropriate character set may be missing or damaged. To resolve this problem, restore Windows from a complete system backup or reinstall (or repair) Windows. If you are running Microsoft Windows Millennium Edition or Microsoft Windows XP, you may be able to resolve this issue without restoring or reinstalling Windows by using the System Restore utility to return your computer to a previous working state, For additional information about how to use System Restore in Windows Millennium Edition, click the following article number to view the article in the Microsoft Knowledge Base:
267951 (http://support.microsoft.com/kb/267951/E… Description of the System Restore Utility in Windows Millennium Edition
For additional information about how to use System Restore in Windows XP, click the following article number to view the article in the Microsoft Knowledge Base:
306084 (http://support.microsoft.com/kb/306084/E… HOW TO: Restore the Operating System to a Previous State in Windows XP
Note that in some cases you may also be able to resolve this problem by manually editing the registry. For example, if the28591 String value is missing from the following registry key, a Web page that is encoded for the Western European (ISO) code page might not display any images:
HKEY_LOCAL_MACHINE/SYSTEM/CurrentContr…
The value for this registry key should be set to the name of the appropriate code page file in your Windows/System or Windows/System32 folder. For the Western European (ISO) code page, this value should be either Cp_28591.nls (Windows 98, Windows Millennium Edition) or C_28591.NLS (Windows NT 4.0, Windows 2000, Windows XP). For additional information about the character sets that are supported by Internet Explorer, visit the following Microsoft Web site:
http://msdn.microsoft.com/library/defaul… (http://msdn.microsoft.com/library/defaul…
Back to the top
View products that this article applies to.
Article ID : 283807
Last Review : February 17, 2006
Revision : 6.0
This article was previously published under Q283807
SYMPTOMS
When you open a Web page, one or more pictures (graphics or images) may not be displayed. Instead, a red X, or a placeholder, may appear in place of the images.
Back to the top
CAUSE
This behavior can occur if one of the following conditions is true: • The Web page includes an image type that is not supported by Internet Explorer.
• The Show Pictures check box is not selected on the Advanced tab of the Internet Options dialog box, or the Toggle Images.exe Web accessory was used to disable images in Internet Explorer.
• The image is displayed based on a script, ActiveX control, cookie, Java applet, or HTTP referral information, and your computer or network is configured to block one or more of these features. For example, you may have Internet Explorer or Symantec Corporation's Norton Internet Security (NIS) or Norton Personal Firewall (NPF) 2002 configured to block one or more of these features.
• Internet Explorer cannot determine the character set (also called code page or encoding) that is used by the Web page, or a file or registry key required to display the Web page with the appropriate character set may be missing or damaged. By default, Internet Explorer uses the character set that is specified in the HTTP content type that is returned by the server, the character set specified by the meta element in the Web page document, or your Encoding preference if no HTTP content type is returned by the server and no meta element is specified in the Web page document.
Back to the top
RESOLUTION
To troubleshoot this issue, follow these steps. After each step, check to see if the issue is resolved. If the issue still occurs, continue troubleshooting with the next step: 1. Right-click the red X or placeholder for the image, and then click Properties. Verify that the image type is supported by Internet Explorer by examining the Type or Address (URL) values in the Properties dialog box. For example, a Graphics Interchange Format (GIF) file will list GIF Image for Type and the Address (URL) ends with .gif. Internet Explorer displays images with an .art, .wmf, .emf, .png, .mov, .xbm, .avi, .mpg, .gif, .jpg, .mpeg, and .bmp extensions.
2. Start Internet Explorer.
3. If you have the Toggle Images.exe Web accessory installed, click the Toggle Images.exe link on the Links toolbar to turn on images.
Note If the Links toolbar is not visible, right-click a blank area of the toolbar and verify that there is a check next to Links. If the Toggle Images.exe link is not visible on the Links toolbar, click the arrow with two angle brackets on the far right-side of the Links toolbar.
4. Verify that Show Pictures has not been turned off in Internet Explorer: a. On the Tools menu, click Internet Options.
b. Click the Advanced tab, and then verify that the Show Pictures check box is selected under Multimedia.
c. Click OK.
5. Make sure scripting, ActiveX controls, cookies, and Java applets are enabled in Internet Explorer. To do so, follow these steps: a. On the Tools menu, click Internet Options.
b. Click the Security tab, and then click Default Level (if it is available) for the zone which contains the Web page (for example, Internet).
c. If you are using Internet Explorer 6, click the Privacy tab, and then click Default (if it is available).
6. If you are using a third-party Internet security, firewall, or cookie blocking program, contact the manufacturer of the program for information about how to enable scripting, ActiveX controls, cookies, Java applets, advertisements, and HTTP referral information. For example, if you have Norton Internet Security (NIS) or Norton Personal Firewall (NPF) installed, see the following Symantec Corporation Web sites for additional information about the various settings in these products that might cause this behavior: • http://service1.symantec.com/SUPPORT/sun… (http://service1.symantec.com/SUPPORT/sun…
• http://service1.symantec.com/SUPPORT/nip… (http://service1.symantec.com/SUPPORT/nip…
If you access the Internet through a local area network (LAN), contact the administrator of your LAN to verify that scripting, ActiveX controls, cookies, Java applets, advertisements, and HTTP referral information are not blocked by a firewall or other security features on the network.
7. Start Internet Explorer.
8. On the View menu, point to Encoding. If a check does not appear next to Auto-Select, click Auto-Select.
9. On the View menu, point to Encoding, and then click the appropriate language for the Web page that you are trying to view. For example, if the Web page is in English (United States), click Western European (ISO) or Western European (Windows). If the required language is not available on the View menu, follow these steps to add it: a. On the Tools menu, click Internet Options.
b. Click Languages, and then click Add.
c. Click the appropriate language, and then click OK.
10. If the problem is not resolved, a file or registry key required to display the Web page with the appropriate character set may be missing or damaged. To resolve this problem, restore Windows from a complete system backup or reinstall (or repair) Windows. If you are running Microsoft Windows Millennium Edition or Microsoft Windows XP, you may be able to resolve this issue without restoring or reinstalling Windows by using the System Restore utility to return your computer to a previous working state, For additional information about how to use System Restore in Windows Millennium Edition, click the following article number to view the article in the Microsoft Knowledge Base:
267951 (http://support.microsoft.com/kb/267951/E… Description of the System Restore Utility in Windows Millennium Edition
For additional information about how to use System Restore in Windows XP, click the following article number to view the article in the Microsoft Knowledge Base:
306084 (http://support.microsoft.com/kb/306084/E… HOW TO: Restore the Operating System to a Previous State in Windows XP
Note that in some cases you may also be able to resolve this problem by manually editing the registry. For example, if the28591 String value is missing from the following registry key, a Web page that is encoded for the Western European (ISO) code page might not display any images:
HKEY_LOCAL_MACHINE/SYSTEM/CurrentContr…
The value for this registry key should be set to the name of the appropriate code page file in your Windows/System or Windows/System32 folder. For the Western European (ISO) code page, this value should be either Cp_28591.nls (Windows 98, Windows Millennium Edition) or C_28591.NLS (Windows NT 4.0, Windows 2000, Windows XP). For additional information about the character sets that are supported by Internet Explorer, visit the following Microsoft Web site:
http://msdn.microsoft.com/library/defaul… (http://msdn.microsoft.com/library/defaul…
Back to the top
- internet explorer cannot display image picture from google group?我的问题就这么解决了View > Encoding >
- 开博~(解决了“找不到Microsoft Internet Explorer”的问题)
- HTTPS下载出现“Internet Explorer Cannot Download”的问题
- 解决Internet Explorer 7/8 首页被绑架的问题
- 如何解决 Internet Explorer 9 安装问题
- 如何解决“Internet Explorer停止工作” -- 今天 解决我的实际问题
- 我的网易博客啊!!!就这么没了!!!
- Cannot start debugging. Unable to find Microsoft Internet Explorer问题
- 无法显示登录网页(Internet Explorer cannot display the webpage)--原因及解决办法
- 解决windows xp桌面上的internet explorer图标没有了的方法
- Gtk-WARNING **: cannot open display问题的解决
- Gtk-WARNING **: cannot open display问题的解决
- Internet Explorer 问题的一般思路
- Using Internet Explorer from .NET
- Using Internet Explorer from .NET
- 解决IE经常出现“Microsoft Internet Explorer遇到问题需要关闭……”的信息提示
- 如何解决“无法开始调试 无法找到 Microsoft Internet Explorer”的问题
- 关于“Cannot cast from View to CheckBox”的问题
- 基于。NET的模块化网络服务应用程序服务器开发 第一章
- 中断Java ME手机上的屏幕保护程序
- 我的未来
- 根据MIDlet套件(Jar文件)自动生成jad文件
- 随机快速排序
- internet explorer cannot display image picture from google group?我的问题就这么解决了View > Encoding >
- 关于龙芯
- 浏览器显示TIF格式传真文件
- su&sudo
- 二分查找
- 【IT系列之7】人脉关系系统怀胎十月诞生记
- 用J2ME在移动设备上实现动画
- vector.resize 与 vector.reserve的区别
- 求助!!!未将对象设置引用到实例的问题