Apache 2.0.54 + mod_gzip 2.0.50 + mod_perl 2.0.1 for Win32配置

1、mod_gzip 2.0.50

下载mod_gzip

for Apache1:
http://www.gknw.net/development/apache/apache-1.3/win32/modules/mod_gzip-1.3.19.1a-w32.zip
http://www.gknw.net/development/apache/apache-1.3/win32/modules/mod_gzip-1.3.19.2a-w32.zip
http://www.gknw.net/development/apache/apache-1.3/win32/modules/mod_gzip-1.3.26.1a-EAPI-w32.zip
http://www.gknw.net/development/apache/apache-1.3/win32/modules/mod_gzip-1.3.26.1a-w32.zip

for Apache2:
http://www.gknw.net/development/apache/httpd-2.0/win32/modules/mod_gzip-2.0.49-w32.zip
http://www.gknw.net/development/apache/httpd-2.0/win32/modules/mod_gzip-2.0.53-w32.zip

编辑httpd.conf:

LoadModule gzip_module modules/mog_gzip.so

<IfModule mod_gzip.c>

########################
### responsibilities ###
########################

# ---------------------------------------------------------------------
# use mod_gzip at all?

  mod_gzip_on                   Yes

# (you can especially enable mod_gzip inside the central server
#  configuration but disable it inside some directories ot virtual
#  hosts by using this directive.)
# ---------------------------------------------------------------------

######################################
### statically precompressed files ###
######################################

# ---------------------------------------------------------------------
# let mod_gzip perform 'partial content negotiation'?

  mod_gzip_can_negotiate        Yes

# (if this option is active and a static file is to be served in com-
#  pressed for, then mod_gzip will look for a static precompressed
#  version of this file with a defined additional extension - see next
#  directive - which would be delivered with priority. This would allow
#  for avoiding to repeatedly compress the same static file and thus
#  saving CPU time.
#  No dynamic caching of this file is provided; currently the user
#  himself is responsible for creating and updating the precompressed
#  file's content.

#  From version 1.3.19.2a mod_gzip automatically recognizes whether
#  a statically precompressed file is older than its uncompressed
#  original and in this case will serve the content of the original
#  file in uncompressed form - as to rather serve correct data than
#  outdated ones ...)

# ---------------------------------------------------------------------

# extension (suffix) for statically precompressed files

  mod_gzip_static_suffix        .gz
  AddEncoding              gzip .gz

# (effect: see previous directive; this string will be appended to the
#  name of the original file.
#  be sure to configure the encoding 'gzip' for this extension as well,
#  because mod_gzip doesn't serve the content itself but simply generates
#  an Apache internal redirection to this URL. Therefore the remaining
#  Apache configuration is responsible for setting the 'Content-Encoding'
#  header properly ...
#  prior to version 1.3.19.2a this value was not configurable.)

# ---------------------------------------------------------------------

# automatic updates for statically precompressed files

  mod_gzip_update_static        No

# (if set to 'Yes', this directive (being new in version 1.3.26.1a) would
# cause mod_gzip to automatically update an outdated version of any
# statically precompressed file during the request, i. e. compress the
# originally requested file and overwrite the precompressed variant
# file with it!
# for each automatic update of this type, mod_gzip will write a message
# of the severity 'notice' into the Apache error_log.
# while doing so, mod_gzip will directly read the original file's content.
# therefore this content cannot be interpreted by any other Apache module
# during the request. this might possibly not be what you want - hopefully
# it will be what most users want, because it works fast this way.
# use this configuration with a lot of care, and be sure that you don't
# inadvertantly cause valuable files within the URL tree to be overwritten.
# this isn't a feature to be used for mass hosting servers, especially
# because mod_gzip might experience access control problems there - the
# userid the Apache processes are running under need to have write access
# to the precompressed files of all users, which may not automatically be
# the case.)
# [mod_gzip error handling in this situation??? what will be served?]

# ---------------------------------------------------------------------

###################
### bureaucracy ###
###################

# ---------------------------------------------------------------------
# display status for mod_gzip

  mod_gzip_command_version      '/mod_gzip_status'

# (defines an URL to display the status of mod_gzip; can be specified
# individually for each installation and protected against access via
# <Location> section for privacy reasons)
# ---------------------------------------------------------------------
# The status display will look like this:
#       mod_gzip is available...
#       mod_gzip_version = 1.3.26.1a
#       mod_gzip_on = Yes/No
# and thus will provide information about
# - mod_gzip being installed at the server and working correctly,
# - which version has been installed and
# - whether mod_gzip has been set 'active' for this Location
#   (-> mod_gzip_on)
# ---------------------------------------------------------------------

#######################
### data management ###
#######################

# ---------------------------------------------------------------------
# Working directory for temporary files and the compression cache
# if not specified, the following default values are used:
# [Win32=c:/temp], [UNIX=/tmp]

# mod_gzip_temp_dir             /tmp

# (This directory must already exist and the userid being used for
#  running the Apache server must have read and write access to this
#  directory.
#  Unlike other Apache directives an absolute path name must be specified
#  here; a relative value will not be interpreted relatively to ServerRoot.
#  This pastname must NOT be terminated with '/'.
#  For maximum performance this directory should be located on a RAM disk,
#  if the file system isn't already being cached efficiently
# ---------------------------------------------------------------------
# Save temporary work files [Yes, No]

  mod_gzip_keep_workfiles       No

# (one file per HTTP request - set to 'yes' for debugging purpose only!)
# ---------------------------------------------------------------------
##################
### file sizes ###
##################
# ---------------------------------------------------------------------
# minimum size (in bytes) for files to be compressed

  mod_gzip_minimum_file_size    500

# (for very small files compression will produce only small absolute gains
#  [you will still save about 50% of the content, but some additional
#  500 bytes of HTTP and TCP headers will always remain uncompressed],
#  but still produce CPU load for both client and server.
#  mod_gzip will automatically set smaller values than 300 bytes for
#  this directive to exactly this value 300.)
# ---------------------------------------------------------------------
# maximum size (in bytes) for files to be compressed

  mod_gzip_maximum_file_size    500000

# (for very large files compression may eventually take rather long and
#  thus delay the start of the transmission.
#  Furthermode a limitation at this point prevents the server from
#  producing output of unlimited size in case of some endless loop
#  inside a CGI script - or even trying to compress streaming data -
#  which might otherwise cause the creation of a temporary file of
#  any size and even fill up the whole hard disk.
#  On the other hand, compression will have a much more perceivable
#  subjective effect for large files ... so be sure to fine-tune this
#  according to your requirements.)
# ---------------------------------------------------------------------
# maximum size (in bytes) for files to be compressed in memory

  mod_gzip_maximum_inmem_size   60000

# (larger files will be compressed into the temp file directory; adapt
#  this value to your server's available main memory.
#  In mod_gzip 1.3.19.x larger values will automatically be limited to
#  60000 because some operating systems are said to have problems
#  allocating more than 64 kb of memory at a time.
# ---------------------------------------------------------------------

####################
### requirements ###
####################

# (see chapter about caching for problems when using these directives.)
# ---------------------------------------------------------------------
# Required HTTP version of the client
# Possible values: 1000 = HTTP/1.0, 1001 = HTTP/1.1, ...
# This directive uses the same numeric protocol values as Apache does
# internally

  mod_gzip_min_http             1000

# (By using this directive you may exclude old browsers, search engines
#  etc. from the compression procedure: if the user agent doesn't
#  declare itself capable of understanding at least the HTTP level
#  specified here, only uncompressed data will be delivered - no matter
#  what else it claims to be able to. The value of '1001' will especially
#  exclude Netscape 4.x. and a lot of proxy servers.)
# ---------------------------------------------------------------------

# HTTP methods to be handled
# Possible values: 'GET', 'POST' or a list of both values.

  mod_gzip_handle_methods        GET POST

# (By using this directive you may particularly exclude POST requests
#  from the compression procedure. There are known cases where the
#  handling of these requests by previous mod_gzip versions could cause
#  problems.
#  Before version 1.3.19.2a this value was not configurable.)

# ---------------------------------------------------------------------

###############
### filters ###
###############

# ---------------------------------------------------------------------
# which files are to be compressed?
#
# The order of processing during each of both phases is not important,
# but to trigger the compression of a request's content this request
# a) must match at least one include rule in each of both phases and
# b) must not match an exclude rule in any of both phases.
# These rules are not minimal, they are meant to serve as example only.
#

# Note that all parameter values of the directives in this section are
# evaluated as regular expressions, and not in a case-sensitive way.

# ---------------------------------------------------------------------
# phase 1: (reqheader, uri, file, handler)
# ========================================
# NO:   special broken browsers which request for gzipped content
#       but then aren't able to handle it correctly

  mod_gzip_item_exclude         reqheader  "User-agent: Mozilla/4.0[678]"

# From version 1.3.19.2a on I advise against using filters
# for User-agents, as this will cause HTTP-Headers 'Vary: User-Agent'
# to be generated, thus making life more difficult for proxy servers.

#
# JA:   HTML-Dokumente
  mod_gzip_item_include         file       /.html$
#
# NO:   include files / JavaScript & CSS (due to Netscape4 bugs)
  mod_gzip_item_exclude         file       /.js$
  mod_gzip_item_exclude         file       /.css$
#
# YES:  CGI scripts
  mod_gzip_item_include         file       /.pl$
  mod_gzip_item_include         handler    ^cgi-script$
#
# phase 2: (mime, rspheader)
# ===========================
# YES:  normal HTML files, normal text files, Apache directory listings
  mod_gzip_item_include         mime       ^text/html$
  mod_gzip_item_include         mime       ^text/plain$
  mod_gzip_item_include         mime       ^httpd/unix-directory$
#
# NO:   images (GIF etc., will rarely ever save anything)
  mod_gzip_item_exclude         mime       ^image/
# ---------------------------------------------------------------------
# In fact mod_gzip is checking only the first 4 characters of the 1st
# operand (in case of uri even the first 2 characters only, as to
# allow for values like url).
# ---------------------------------------------------------------------
# The table for mod_gzip_item rules (include and exclude) cannot contain
# more than 256 entries; when this number is exceeded mod_gzip will
# output the message "mod_gzip: ERROR: Item index is full"
# and report a configuration error to the Apache server.
# ---------------------------------------------------------------------
# The directive values described here are meant to describe the requests
# elected for compression most exactly.
# Especially for the mime rules it has to be made clear that the HTTP
# header 'Content-Type' (that will be checked by mod_gzip for this rule)
# in some cases may contain not only a MIME type but additionally a
# character set description (charset) as well.
# If this is the case for the requests to be handled then you need to
# remove the '$' char at the end of the corresponding value so that now
# only the prefix of this value will be tested for matching.
# ---------------------------------------------------------------------

##########################
### transfer encodings ###
##########################

# ---------------------------------------------------------------------
# Allow mod_gzip to eliminate the HTTP header
#    'Transfer-encoding: chunked'
# and join the chunks to one (compressable) packet
  mod_gzip_dechunk              Yes
# (this is required for handling several types of dynamically generated
# contents, especially for CGI and SSI pages, but also for pages produced
# by some Java Servlet interpreters.
# ---------------------------------------------------------------------
###############
### logging ###
###############

# ---------------------------------------------------------------------
# Extended log format (for testing the compression effect)
  LogFormat                     "%h %l %u %t /"%V %r/" %<s %b mod_gzip: %{mod_gzip_result}n In:%{mod_gzip_input_size}n -< Out:%{mod_gzip_output_size}n = %{mod_gzip_compression_ratio}n pct." common_with_mod_gzip_info2
# ---------------------------------------------------------------------
# Create additional log file
  CustomLog                     logs/mod_gzip.log common_with_mod_gzip_info2
# (surely you can redefine your normal log file format, but you mal well
#  keep its format standard compatible for evaluation by standard web
#  analysis tools. So we just create another log file.)
# ---------------------------------------------------------------------
# Volume computation of the delivered files inside the Apache access_log:
# count HTTP header size (in bytes) as part of total output size
  mod_gzip_add_header_count     Yes
# (This will be more than the pure document content, but it will more
#  realistically describe the total output traffic of the HTTP request)
# ---------------------------------------------------------------------

###############
### proxies ###
###############

# ---------------------------------------------------------------------
# sending a 'Vary' HTTP header
  mod_gzip_send_vary            On
# (see chapter about caching for this directive.)
#  don't change this unless you absolutely know what you are doing!
# ---------------------------------------------------------------------

</IfModule>

上面是官方网站的配置方法：http://www.schroepl.net/projekte/mod_gzip/index.htm

上面是官方网站的配置方法：http://www.schroepl.net/projekte/mod_gzip/index.htm

我自己的配置：

#
# mod_gzip 2.0.50
#

LoadModule gzip_module modules/mod_gzip.so

<IfModule mod_gzip.c>
  LogFormat "%h %l %u %t /"%r/" %>s %b mod_gzip: %{mod_gzip_result}n In:%{mod_gzip_input_size}n Out:%{mod_gzip_output_size}n Ratio:%{mod_gzip_compression_ratio}npct." common_with_mod_gzip_info2
  CustomLog logs/gzip.log common_with_mod_gzip_info2
  mod_gzip_on Yes
  mod_gzip_item_include file /.html$
  mod_gzip_item_include file /.php$
  mod_gzip_item_include file /.htm$
  mod_gzip_item_include mime text/.*
  mod_gzip_item_exclude file error/.*
  mod_gzip_item_exclude mime ^image/.*
  mod_gzip_temp_dir "E:/tmp/gzip"
  mod_gzip_command_version mod_gzip_version
  mod_gzip_dechunk yes
  # mod_gzip_keep_workfiles Yes
</IfModule>

# End of mod_gzip

2、mod_perl 2.0.1

安装perl 5.8.7，完成后，在shell中执行：

D:/>ppm install http://theoryx5.uwinnipeg.ca/ppms/mod_perl.ppd

====================
Install 'mod_perl' version 2.0.1 in ActivePerl 5.8.7.813.
====================

Installing D:/server/perl/site/lib/auto/Apache2/typemap
Installing D:/server/perl/site/lib/auto/Apache2/Access/Access.bs
Installing D:/server/perl/site/lib/auto/Apache2/Access/Access.dll
Installing D:/server/perl/site/lib/auto/Apache2/Access/Access.exp
Installing D:/server/perl/site/lib/auto/Apache2/Access/Access.lib
Installing D:/server/perl/site/lib/auto/Apache2/CmdParms/CmdParms.bs
Installing D:/server/perl/site/lib/auto/Apache2/CmdParms/CmdParms.dll
Installing D:/server/perl/site/lib/auto/Apache2/CmdParms/CmdParms.exp
这里省略n多内容......

The Apache2 module mod_perl.so is needed to complete the installation,
and should be placed in your Apache2 modules directory. I will
now fetch and install this for you.

Fetching http://theoryx5.uwinnipeg.ca/ppms/x86/mod_perl.so ...  done!
Where should mod_perl.so be placed? [D:/Apache2/modules]D:/apache2/

上面的D:/apache2/为mod_perl.so文件的存储路径，光标会停留在这儿，直到你输入合法路径并回车，然后继续。可以任意设置

mod_perl.so has been successfully installed to D:/apache2.
To enable mod_perl, put in the directives
   LoadFile "C:/Path/to/Perl/bin/perl58.dll"
   LoadModule perl_module modules/mod_perl.so
in httpd.conf. For more information, visit
   http://perl.apache.org/
and especially see
   http://perl.apache.org/docs/2.0/rename.html

Successfully installed mod_perl version 2.0.1 in ActivePerl 5.8.7.813.

D:/>

mod_perl.so has been successfully installed to D:/apache2.
To enable mod_perl, put in the directives
   LoadFile "C:/Path/to/Perl/bin/perl58.dll"
   LoadModule perl_module modules/mod_perl.so
in httpd.conf. For more information, visit
   http://perl.apache.org/
and especially see
   http://perl.apache.org/docs/2.0/rename.html

Successfully installed mod_perl version 2.0.1 in ActivePerl 5.8.7.813.

D:/>

完成后，在D:/apache2下会生成124KB的mod_perl.so文件，就是它了，复制到Apache2的modules目录下，修改httpd.conf

#
# mod_perl 2.0.1
#

LoadFile "D:/perl/bin/perl58.dll"
LoadModule perl_module modules/mod_perl.so

AddHandler  perl-script  .pl

Alias /perl/ "E:/wwwroot/perl/"
<Location /perl/>
  SetHandler perl-script
  PerlResponseHandler ModPerl::Registry
  Options +ExecCGI
  PerlOptions +ParseHeaders
</Location>

# End of mod_perl

测试脚本info.pl

  ##  printenv -- demo CGI program which just prints its environment
  ##
  use strict;
  print "Content-type: text/html/n/n";
  print "<HTML><BODY><H3>Environment variables</H3><UL>";
  foreach (sort keys %ENV) {
    my $val = $ENV{$_};
    $val =~ s|/n|//n|g;
    $val =~ s|"|//"|g;
    print "<LI>$_ = /"${val}/"</LI>/n";
  }
  #sleep(10);
  print "</UL></BODY></HTML>";