R61509/SPFD5420A驱动调试总结

来源：互联网发布：淘宝怎么修改主题颜色编辑：程序博客网时间：2024/05/22 00:50

这贴为了回应上一次在WINCE区被转走的一个帖子。调试了半个月终于把屏完全调好了。
呵呵。累啊。

環境：wince5.0
cpu：ARM920T Anyka7802
玻璃：LG liquid crystal panel
Driver IC：R61509/SPFD5420A 可以互相替代
通讯：并行16bit命令并行18bit数据
其他：i80SYSTEM 18BIT-262

下面给出初始化的code

C/C++ code


//(1).reset first

//(2).init normal reg
{0x0001,0x0000},
{0x0002,0x0700},
{0x0003,0x0008},//here we modify @ 091124 14:20
{0x0006,0x0000},
{0x0008,0x0503},
{0x0009,0x0001},
{0x000b,0x0010},
{0x000C,0x0000},//here we modify @  20091123
{0x000F,0x0000},
{0x0010,0x0012},
{0x0011,0x0202},
{0x0012,0x0300},
{0x0020,0x001E},
{0x0021,0x0202},
{0x0022,0x0100},
{0x0090,0x0000},
{DELAY_FLAG, 110},


//################# void Gamma_Set(void) ####################//
//(3).init gamma reg
 {0x0300,0x0101},          //0101
 {0x0301,0x0B27},          //0b26
 {0x0302,0x152a},          //1329
 {0x0303,0x2a15},        //2913
 {0x0304,0x270B},        //260b
 {0x0305,0x0101},        //
 {0x0306,0x1205},        //1804
 {0x0307,0x0512},        //0418
 {0x0308,0x0005},    //0205
 {0x0309,0x0003},//0303
 {0x030A,0x0804},    //0e05
 {0x030B,0x0800},    //0d01
 {0x030C,0x0005},    //010d
 {0x030D,0x0405},    //050e
 {DELAY_FLAG, 110},
//(4).init base image reg
     {0x0400,/*0x1D00*/0x3100},//here we modify @ 091126 16:20
     {0x0401,0x0000},    
     {0x0404,0x0000},    
     {0x0606,0x0000},
     {0x06F0,0x0001},
     
     {DELAY_FLAG, 110},

     {0x0007,0x0173},
     
     {DELAY_FLAG, 110},

//(5).set a base address reg

     {END_FLAG, END_FLAG}

有调试这个屏IC的朋友可以参考下。呵呵。
注意R400H寄存器。另外我这里旋转了270度。屏旋转注意R003H寄存器。

有关于基于WINCE+屏调试的问题大家可以互相沟通。

关键的寄存器 R003H R400H R401H R402H.