Netapp fundamental trainning 笔记1 install and configuration
来源:互联网 发布:压缩照片的软件 编辑:程序博客网 时间:2024/06/07 02:26
- M02-install and configuration
- The storage system stores requests it receives in nonvolatile random-access memory (NVRAM). --->so ,before halt, need to flush data from NVRAM to disk.
- Special menu:
- Boot without /etc/rc
- Change password
- 4a
- Maintenance mode boot
- 安装simulator--
- suse默认的是tftp,所以要用这个协议的客户端传输
- Tar -xvfz *.tgz
- Setup.sh
- 加块网卡-加了3块,好做vif练习
- 安装的时候
- cluster
- 网卡如何选择???
- 第一次:
Checking the default route...
You have a single network interface called eth3 (default route) . You will not be able to access the simulator from this Linux host. If this interface is marked DOWN in ifconfig then your simulator will crash.
- 第二次
- Not recommended for the simulator: eth7 (no ip address) eth6 (no ip address) eth5 (no ip address) eth3 (default route)
Choosing a DOWN interface will cause the simulator to crash.
Either repair the interface(s) or choose the "default route" interface.
- Disks
- Your simulator has 3 disk(s). How many more would you like to add? [0]: 20
- 然后/sim/node1/runsim.sh
- 第一次的时候需要配置 ip等
- 然后启动的时候起不来,说网卡等问题
- 继续新卡eth7 - 1.221
- 222/223-node1/node2
- ok了
- License add
- From filer view: http://192.168.1.222/na_admin/sim/doc/license_keys.htm
- Cifs, cluster, nfs, disk_santization, iscsi, snapxxx,
- Cluster license加完后需要reboot生效, santization license加之后不能再从系统删除了
- From filer view: http://192.168.1.222/na_admin/sim/doc/license_keys.htm
- Suse Netapp IP :192.168.1.220
- 拷贝国来的网卡不好用,删除其即可
- 第二台机器的网络外部可以访问,但从linux为啥访问不到呢. Route -s 192.168.1.1也都对.
- Boot sequence
- Read file : /etc/rc, /etc/registry, /etc/hosts
- Setup script
- 第一次初始化的时候会自动调用
- 可以后任意时刻调用来修改配置
- Reboot for change to take effect
- Or source /etc/rc
- Reboot for change to take effect
- Network interface configuration
- Name : e1b
- Message logging
- Syslogd /etc/syslog.conf ---?没有配置?
- Will write to 3 dest
- Default file: /etc/messages
- Test task III:Halting the workstation
- Halt then test command on hardware level
- CFE>help; printenv; boot_primary
- Halt then test command on hardware level
- Netapp fundamental trainning 笔记1 install and configuration
- Netapp fundamental trainning 笔记2 basic admin
- Netapp fundamental trainning 笔记3 Admin security
- Netapp fundamental trainning 笔记4 networking
- mainlman install and configuration
- Apache Ant Install and Configuration
- About Contest and Trainning
- 組件安裝與配置 / Assembly Install and Configuration
- [.NET] 組件安裝與配置 / Assembly Install and Configuration
- Netapp takeover and giveback
- BI Concept and Fundamental
- TRAINNING
- JAVA笔记一:FUNDAMENTAL
- ubuntu 14.04 server install and configuration rabbitmq cluster
- NetApp存储产品---知识笔记
- homography, essential and fundamental matrix
- homography, essential and fundamental matrix
- Movex trainning-course 1summary
- 普及历史知识-----硬盘的发展(挺好玩的,转过来看看)
- ddd调试程序初步
- Java压缩类库的使用-5.性能检测
- 何时用自定义标签?
- 【原创】Windows® Embedded CE 6.0 Fundamentals 读书笔记_Chapter 8
- Netapp fundamental trainning 笔记1 install and configuration
- TextBox重绘样式
- Oracle实现分页
- 一份比较详细的DOS命令说明
- DDD动态查看内核
- reactos操作系统实现(146)
- 网页播放flash没有声音和Firefox无法安装插件的问题
- 想成功必须养成的十大习惯
- 使用Struts2的拦截器实现权限控制