在Fedora12下安装VMware7的VMware Tools

在Fedora12下安装VMware7的VMware Tools

 

以下是帮助文件的内容

 

Install VMware Tools in a Linux Guest Before you begin, make sure the virtual machine is powered on and the guest operating system is running.
To install VMware Tools in a Linux guest
1  On the host, select VM > Install VMware Tools.

If an earlier version of VMware Tools is installed, the menu item is Update VMware Tools. If the current version is installed, the menu item is Reinstall VMware Tools.

2  On the guest, log in as root.

 

3  If your Linux distribution does not automatically mount CD-ROMs, mount the VMware Tools virtual CD-ROM image.

a  If necessary, create the /mnt/cdrom directory:

mkdir /mnt/cdrom
b  Mount the CD-ROM drive.

Some Linux distributions use different device names or organize the /dev directory differently. If your CD-ROM drive is not /dev/cdrom or if the mount point for a CD-ROM is not /mnt/cdrom, modify the command to reflect the conventions used by your distribution.
mount /dev/cdrom /mnt/cdrom

4  Change to a working directory (for example, /tmp):

cd /tmp

5  If a previous installation exists, delete the previous vmware-tools-distrib directory. 

The location of this directory depends on where you placed it during the previous installation. Often it is placed in /tmp/vmware-tools-distrib.

6  Uncompress the installer:

tar zxpf /mnt/cdrom/VMwareTools-<x.x.x>-<yyyy>.tar.gz
The value <x.x.x> is the product version number and <yyyy> is the build number of the product release.

7  If necessary, unmount the CD-ROM image.

If your Linux distribution automatically mounted the CD-ROM, you do not need to unmount the image.
umount /dev/cdrom

8  Run the VMware Tools installer.

cd vmware-tools-distrib
./vmware-install.pl
Respond to the questions the command-line wizard displays on the screen. Press Enter to accept the default value. The configuration file, vmware-config-tools.pl, runs after the installer file finishes running.

在运行这边的时候如果出现如下图情况

 

执行如下命令，如果不出问题的话安装就不会有问题

yum install gcc* -y
yum install kernel-devel* -y
yum install kernel-headers* -y

 

安装完成以后，重新启动客户机，VMware Tools 就可以使用了

 

比如共享文件 ，只需要拖放你要共享的文件到主机或者客户机就可以了。这也是我安装VMware Tools的主要目的

 

 

 

9  If you are updating VMware Tools, reboot the virtual machine or manually reload the pvscsi, vmxnet, and vmxnet3 Linux kernel modules.

If you reload the modules, networking on the virtual machine is interrupted.

10  Enter the following commands to restore the network:

/etc/init.d/network stop
rmmod vmxnet
modprobe vmxnet
/etc/init.d/network start

11  Log out of the root account.

exit

12  (Optional) Start your graphical environment.

 

13  In an X terminal, to start the VMware User process, enter the following command:

vmware-user