php配置文件解析

PHP]

;;;;;;;;;;;
; WARNING ;
;;;;;;;;;;;
; This is the default settings file for new PHPinstallations.
; By default, PHP installs itself with a configuration suitablefor
; development purposes, and *NOT* for production purposes.
; For several security-oriented considerations that should betaken
; before going online with your site, please consultphp.ini-recommended
; and http://php.net/manual/en/security.php.


;;;;;;;;;;;;;;;;;;;
; About php.ini   ;
;;;;;;;;;;;;;;;;;;;
; This file controls many aspects of PHP'sbehavior.  In order for PHP to
; read it, it must be named 'php.ini'.  PHP looksfor it in the current
; working directory, in the path designated by the environmentvariable
; PHPRC, and in the path that was defined in compile time (in thatorder).
; Under Windows, the compile-time path is the Windowsdirectory.  The
; path in which the php.ini file is looked for can be overriddenusing
; the -c argument in command line mode.
;
; The syntax of the file is extremely simple. Whitespace and Lines
; beginning with a semicolon are silently ignored (as you probablyguessed).
; Section headers (e.g. [Foo]) are also silently ignored, eventhough
; they might mean something in the future.
;
; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* - foo=bar is different fromFOO=bar.
;
; The value can be a string, a number, a PHP constant (e.g. E_ALLor M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) oran expression
; (e.g. E_ALL & ~E_NOTICE), or a quoted string("foo").
;在ini文件本身使用的逻辑值使用的运算符
; Expressions in the INI file are limited to bitwise operators andparentheses:
;|       bitwise OR
;&       bitwise AND
;~       bitwise NOT
;!       boolean NOT
;
; Boolean flags can be turned on using the values 1, On, True orYes.
; They can be turned off using the values 0, Off, False orNo.
;
; An empty string can be denoted by simply not writing anythingafter the equal
; sign, or by using the None keyword:
;
;  foo=        ; sets foo to an empty string
;  foo =none    ; setsfoo to an empty string
;  foo = "none"  ; sets foo tothe string 'none'
;
; If you use constants in your value, and these constants belong toa
; dynamically loaded extension (either a PHP extension or a Zendextension),
; you may only use these constants *after* the line that loads theextension.
;
;
;;;;;;;;;;;;;;;;;;;
; About this file ;
;;;;;;;;;;;;;;;;;;;
; All the values in the php.ini-dist file correspond to thebuiltin
; defaults (that is, if no php.ini is used, or if you delete theselines,
; the builtin defaults will be identical).


;;;;;;;;;;;;;;;;;;;;
; Language Options ;
;;;;;;;;;;;;;;;;;;;;

; Enable the PHP scripting language engine under Apache.

;PHP引擎是否开启
engine = On

; Enable compatibility mode with Zend Engine 1 (PHP 4.x)

;php4.x仍在使用中，启用后，php5中可以顺利运行php4程序
zend.ze1_compatibility_mode = Off

; Allow the <? tag.  Otherwise,only <?php and<script> tags are recognized.
; NOTE: Using short tags should be avoided when developingapplications or
; libraries that are meant for redistribution, or deployment onPHP
; servers which are not under your control, because short tags maynot
; be supported on the target server. For portable, redistributablecode,
; be sure not to use short tags.

;是否允许短开放标记<?标明PHP脚本
short_open_tag = On

; Allow ASP-style <% %> tags.

;是否使用asp风格的标记PHP脚本
asp_tags = Off

; The number of significant digits displayed in floating pointnumbers.

;浮点数中显示的有效数字个数
precision   =  12

; Enforce year 2000 compliance (will cause problems withnon-compliant browsers)

;过时的不兼容浏览器y2k问题仍存在，如果存在则设为OFF
y2k_compliance = On

; Output buffering allows you to send header lines (includingcookies) even
; after you send body content, at the price of slowing PHP's outputlayer a
; bit.  You can enable output buffering duringruntime by calling the output
; buffering functions.  You can also enable outputbuffering for all files by
; setting this directive to On.  If you wish tolimit the size of the buffer
; to a certain size - you can use a maximum number of bytes insteadof 'On', as
; a value for this directive (e.g., output_buffering=4096).

;启动后使用输出缓冲，PHP在脚本完成后一次发送所有输出。;

;开启后在HTTP首部已经发送后，能再发送一个cookie
output_buffering = Off

; You can redirect all of the output of your scripts to afunction.  For
; example, if you set output_handler to "mb_output_handler",character
; encoding will be transparently converted to the specifiedencoding.
; Setting any output handler automatically turns on outputbuffering.
; Note: People who wrote portable scripts should not depend on thisini
;      directive. Instead, explicitly set the output handler usingob_start().
;      Using this ini directive may cause problems unless you know whatscript
;      is doing.
; Note: You cannot use both "mb_output_handler" with"ob_iconv_handler"
;      and you cannot use both "ob_gzhandler" and"zlib.output_compression".
; Note: output_handler must be empty if this is set 'On' !!!!
;      Instead you must use zlib.output_handler.

;在输出返回给请求用户前，所有输出传递给一个函数，

;比如压缩所有输出output_handler ="ob_gzhandler"
;output_handler =

; Transparent output compression using the zlib library
; Valid values for this option are 'off', 'on', or a specificbuffer size
; to be used for compression (default is 4KB)
; Note: Resulting chunk size may vary due to nature of compression.PHP
;      outputs chunks that are few hundreds bytes each as a resultof
;      compression. If you prefer a larger chunk size for better
;      performance, enable output_buffering in addition.
; Note: You need to use zlib.output_handler instead of thestandard
;      output_handler, or otherwise the output will be corrupted.

;启用后输出返回给浏览器前先压缩，节省带宽和时间，使用一个特定的值表示压缩缓冲区大小
zlib.output_compression = Off
;zlib.output_compression_level = -1

; You cannot specify additional output handlers ifzlib.output_compression
; is activated here. This setting does the same as output_handlerbut in
; a different order.

;如果zlib不可用，使用指定的压缩库

;zlib.output_handler =

; Implicit flush tells PHP to tell the output layer to flushitself
; automatically after every output block.  This isequivalent to calling the
; PHP function flush() after each and every call to print() orecho() and each
; and every HTML block.  Turning this option onhas serious performance
; implications and is generally recommended for debugging purposesonly.

;

;启动后，每次调用print()或echo()后，以及每个嵌入的HTML块完成后，自动清除或刷新其内容的输出

;缓冲区，当某个操作很长时间时，可向用户输出状态的更新

implicit_flush = Off

; The unserialize callback function will be called (with theundefined class'
; name as parameter), if the unserializer finds an undefinedclass
; which should be instantiated.
; A warning appears if the specified function is not defined, or ifthe
; function doesn't include/implement the missing class.
; So only set this entry, if you really want to implement sucha
; callback-function.

;请求实例化一个未定义的类时，控制逆串行化器的响应。
unserialize_callback_func=

; When floats & doubles are serialized storeserialize_precision significant
; digits after the floating point. The default value ensures thatwhen floats
; are decoded with unserialize, the data will remain the same.

;在串行化双精度和单精度浮点数时小数后存的位数。
serialize_precision = 100

; Whether to enable the ability to force arguments to be passed byreference
; at function call time.  This method isdeprecated and is likely to be
; unsupported in future versions of PHP/Zend.  Theencouraged method of
; specifying which arguments should be passed by reference is inthe function
; declaration.  You're encouraged to try and turnthis option Off and make
; sure your scripts work properly with it in order to ensure theywill work
; with future versions of the language (you will receive a warningeach time
; you use this feature, and the argument will be passed by valueinstead of by
; reference).

;启用表示函数参数调用使用传引用，不使用传值
allow_call_time_pass_reference = On

;
; Safe Mode
;
; NOTE: this is considered a "broken" security measure.
;      Applications relying on this feature will not recieve full
;      support by the security team.  For moreinformation please
;      see /usr/share/doc/php5-common/README.Debian.security
;启用自动禁用很多功能和可能不安全的各种特性
safe_mode = Off

; By default, Safe Mode does a UID compare check when
; opening files. If you want to relax this to a GID compare,
; then turn on safe_mode_gid.

;启用打开文件时，执行GID和UID检查；禁用执行更严格的GID和UID检查
safe_mode_gid = Off

; When safe_mode is on, UID/GID checks are bypassed when
; including files from this directory and its subdirectories.
; (directory must also be in include_path or full path must
; be used when including)

;当打开文件位于指定的目录中，将忽略UID/GID的检查
safe_mode_include_dir =

; When safe_mode is on, only executables located in thesafe_mode_exec_dir
; will be allowed to be executed via the exec family offunctions.

;exec()只能执行指定目录中的文件
safe_mode_exec_dir =

; Setting certain environment variables may be a potential securitybreach.
; This directive contains a comma-delimited list ofprefixes.  In Safe Mode,
; the user may only alter environment variables whose names beginwith the
; prefixes supplied here.  By default, users willonly be able to set
; environment variables that begin with PHP_ (e.g.PHP_FOO=BAR).
;
; Note:  If this directive is empty, PHP will letthe user modify ANY
; environment variable!

;用户通过PHP脚本能修改的操作系统级环境变量
safe_mode_allowed_env_vars = PHP_

; This directive contains a comma-delimited list of environmentvariables that
; the end user won't be able to change usingputenv().  These variables will be
; protected even if safe_mode_allowed_env_vars is set to allow tochange them.

;防止修改哪些环境变量
safe_mode_protected_env_vars = LD_LIBRARY_PATH

; open_basedir, if set, limits all file operations to the defineddirectory
; and below.  This directive makes most sense ifused in a per-directory
; or per-virtualhost web server configuration file. This directiveis
; *NOT* affected by whether Safe Mode is turned On or Off.

; NOTE: this is considered a "broken" security measure.
;      Applications relying on this feature will not recieve full
;      support by the security team.  For moreinformation please
;      see /usr/share/doc/php5-common/README.Debian.security
;
;所有的文件操作限制在此目录中
;open_basedir =

; This directive allows you to disable certain functions forsecurity reasons.
; It receives a comma-delimited list of function names. Thisdirective is
; *NOT* affected by whether Safe Mode is turned On or Off.

;禁用某些默认函数
disable_functions =

; This directive allows you to disable certain classes for securityreasons.
; It receives a comma-delimited list of class names. This directiveis
; *NOT* affected by whether Safe Mode is turned On or Off.

;防止使用的类
disable_classes =

; Colors for Syntax Highlighting mode.  Anythingthat's acceptable in
; <span style="color: ???????"> wouldwork.

;语法突出显示
;highlight.string  = #DD0000
;highlight.comment = #FF9900
;highlight.keyword = #007700
;highlight.bg     = #FFFFFF
;highlight.default = #0000BB
;highlight.html   = #000000

; If enabled, the request will be allowed to complete even if theuser aborts
; the request. Consider enabling it if executing long request,which may end up
; being interrupted by the user or a browser timing out.

;用户在页面加载之前就关闭了浏览器，或在浏览某个页面时，启用后，服务器忽略这种中断造成的会

;话中断
; ignore_user_abort = On

; Determines the size of the realpath cache to be used by PHP. Thisvalue should
; be increased on systems where PHP opens many files to reflect thequantity of
; the file operations performed.

;
; realpath_cache_size=16k

; Duration of time, in seconds for which to cache realpathinformation for a given
; file or directory. For systems with rarely changing files,consider increasing this
; value.
; realpath_cache_ttl=120

;
; Misc
;
; Decides whether PHP may expose the fact that it is installed onthe server
; (e.g. by adding its signature to the Web serverheader).  It is no security
; threat in any way, but it makes it possible to determine whetheryou use PHP
; on your server or not.

; 防止通过服务器签名来获得有关web服务器的信息
expose_php = On


;;;;;;;;;;;;;;;;;;;
; Resource Limits ;
;;;;;;;;;;;;;;;;;;;

;PHP脚本可以执行的时间上限

max_execution_time =30    ; Maximum execution time of each script, in seconds

;php脚本解析可以请求数据的时间上限
max_input_time = 60 ; Maximum amount of time each script may spendparsing request data

;PHP脚本可以分配的最大内存量
;max_input_nesting_level = 64 ; Maximum input variable nestinglevel
memory_limit =16M     ; Maximum amount of memory a script may consume (16MB)

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Error handling and logging ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; error_reporting is a bit-field.  Or each numberup to get desired error
; reporting level
;E_ALL            - All errors and warnings (doesn't include E_STRICT)
;E_ERROR          - fatal run-time errors
; E_RECOVERABLE_ERROR  - almost fatal run-timeerrors
;E_WARNING        - run-time warnings (non-fatal errors)
;E_PARSE          - compile-time parse errors
;E_NOTICE         - run-time notices (these are warnings which often result
;                    from a bug in your code, but it's possible that it was
;                    intentional (e.g., using an uninitialized variable and
;                    relying on the fact it's automatically initialized to an
;                    empty string)
;E_STRICT         - run-time notices, enable to have PHP suggest changes
;                    to your code which will ensure the best interoperability
;                    and forward compatibility of your code
;E_CORE_ERROR     - fatal errors that occur during PHP's initial startup
;E_CORE_WARNING   - warnings (non-fatal errors) that occur during PHP's
;                    initial startup
; E_COMPILE_ERROR   - fatalcompile-time errors
; E_COMPILE_WARNING - compile-time warnings (non-fatalerrors)
;E_USER_ERROR     - user-generated error message
;E_USER_WARNING   - user-generated warning message
;E_USER_NOTICE    - user-generated notice message
;
; Examples:
;
;   - Show all errors, except fornotices and coding standards warnings
;错误报告敏感度级别13种
;error_reporting = E_ALL & ~E_NOTICE
;
;   - Show all errors, except fornotices
;
;error_reporting = E_ALL & ~E_NOTICE |E_STRICT
;
;   - Show only errors
;
;error_reporting =E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR
;
;   - Show all errors except fornotices and coding standards warnings
;
error_reporting  =  E_ALL& ~E_NOTICE

; Print out errors (as a part of the output).  Forproduction web sites,
; you're strongly encouraged to turn this feature off, and useerror logging
; instead (see below).  Keeping display_errorsenabled on a production web site
; may reveal security information to end users, such as file pathson your Web
; server, your database schema or other information.
;
; possible values for display_errors:
;输出指定级别之上的所有错误
;Off       - Do not display any errors
;stderr    - Display errors to STDERR (affects only CGI/CLI binaries!)
;
;display_errors = "stderr"
;
; stdout (On) - Display errors to STDOUT
;
display_errors = On

; Even when display_errors is on, errors that occur during PHP'sstartup
; sequence are not displayed.  It's stronglyrecommended to keep
; display_startup_errors off, except for when debugging.

;防止PHP启动过程中的错误显示给用户
display_startup_errors = Off

; Log errors into a log file (server-specific log, stderr, orerror_log (below))
; As stated above, you're strongly advised to use error logging inplace of
; error displaying on production web sites.

;PHP应记录哪些错误
log_errors = Off

; Set maximum length of log_errors. In error_log information aboutthe source is
; added. The default is 1024 and 0 allows to not apply any maximumlength at all.

;一条日志消息的最大长度
log_errors_max_len = 1024

; Do not log repeated messages. Repeated errors must occur in samefile on same
; line until ignore_repeated_source is set true.

;防止记录重复的错误
ignore_repeated_errors = Off

; Ignore source of message when ignoring repeated messages. Whenthis setting
; is On you will not log errors with repeated messages fromdifferent files or
; source lines.

;在防止记录重复的错误考虑错误源
ignore_repeated_source = Off

; If this parameter is set to Off, then memory leaks will not beshown (on
; stdout or in the log). This has only effect in a debug compile,and if
; error reporting includes E_WARNING in the allowed list

;显示和记录内存泄露
report_memleaks = On

;report_zend_debug = 0

; Store the last error/warning message in $php_errormsg(boolean).

;$php_errormsg存最近的错误
track_errors = Off

; Disable the inclusion of HTML tags in error messages.
; Note: Never use this feature for production boxes.

;是否把错误消息包围在HTML标记内
;html_errors = Off

; If html_errors is set On PHP produces clickable error messagesthat direct
; to a page describing the error or function causing the error indetail.
; You can download a copy of the PHP manual fromhttp://www.php.net/docs.php
; and change docref_root to the base URL of your local copyincluding the
; leading '/'. You must also specify the file extension being usedincluding
; the dot.
; Note: Never use this feature for production boxes.

;启用html_errors，PHP会包括一个指向错误详细描述（官方手册）的链接，如果启用本项，

;则指定本地手册的位置
;docref_root = "/phpmanual/"

;PHP

;启用PHP本地手册的扩展名
;docref_ext = .html

; String to output before an error message.

;希望在输出错误之前向用户传递附加的信息
;error_prepend_string = "<fontcolor=ff0000>"

; String to output after an error message.

;希望在输出错误之后向用户传递附加的信息
;error_append_string ="</font>"

; Log errors to specified file.

;错误日志的文件
;error_log = filename

; Log errors to syslog (Event Log on NT, not valid in Windows95).

;记录在WIN的事件日志中
;error_log = syslog


;;;;;;;;;;;;;;;;;
; Data Handling ;
;;;;;;;;;;;;;;;;;
;
; Note - track_vars is ALWAYS enabled as of PHP 4.0.3

; The separator used in PHP generated URLs to separatearguments.
; Default is "&".

;PHP自动生成URL，并使用标准的&符号分隔输入变量，使用这个指令改变这个约定。
;arg_separator.output = "&amp;"

; List of separator(s) used by PHP to parse input URLs intovariables.
; Default is "&".
; NOTE: Every character in this directive is considered asseparator!

;&是POST或GET方法用来分隔输入变量的标准字符,可使用此指令改变分隔符
;arg_separator.input = ";&"

; This directive describes the order in which PHP registers GET,POST, Cookie,
; Environment and Built-in variables (G, P, C, E &S respectively, often
; referred to as EGPCS or GPC).  Registration isdone from left to right, newer
; values override older values.

;GET, POST, Cookie和SERVER变量的解析顺序
variables_order = "EGPCS"

; Whether or not to register the EGPCS variables as globalvariables.  You may
; want to turn this off if you don't want to clutter your scripts'global scope
; with user data.  This makes most sense whencoupled with track_vars - in which
; case you can access all of the GPC variables through the$HTTP_*_VARS[],
; variables.
;
; You should do your best to write your scripts so that they do notrequire
; register_globals to be on;  Using form variablesas globals can easily lead
; to possible security problems, if the code is not very wellthought of.

; NOTE: applications relying on this feature will not recievefull
;      support by the security team.  For moreinformation please
;      see /usr/share/doc/php5-common/README.Debian.security
;所有GET, POST, Cookie和SERVER变量都是全局变量，能在全局范围内进行修改，禁用后，可加强安全性

;这些变量虽然 在全局范围内，但必须与其类型一起引用。
register_globals = Off

; Whether or not to register the old-style input arrays,HTTP_GET_VARS
; and friends.  If you're not using them, it'srecommended to turn them off,
; for performance reasons.

;是否使用已经废弃的语法
register_long_arrays = On

; This directive tells PHP whether to declare theargv&argc variables (that
; would contain the GET information).  If youdon't use these variables, you
; should turn it off for increased performance.

;启用后通过GET方法传入信息，可使用argc（参数个数）和argv（参数数组）功能
register_argc_argv = On

; When enabled, the SERVER and ENV variables are created whenthey're first
; used (Just In Time) instead of when the script starts. If thesevariables
; are not used within a script, having this directive on willresult in a
; performance gain. The PHP directives register_globals,register_long_arrays,
; and register_argc_argv must be disabled for this directive tohave any affect.

;
auto_globals_jit = On

; Maximum size of POST data that PHP will accept.

;对以POST方式传输大量数据，对PHP脚本传递的数据量加一个上限
post_max_size = 8M

; Magic quotes
;

; Magic quotes for incoming GET/POST/Cookie data.

;对GET、POST和cookie方法传输的数据启用魔法引号，所有单引号、双引号、反斜线和空字符

;使用反斜线自动转义
magic_quotes_gpc = On

; Magic quotes for runtime-generated data, e.g. data from SQL, fromexec(), etc.

;启用此参数，所有来自外部资源的数据中引号会自动转义
magic_quotes_runtime = Off

; Use Sybase-style magic quotes (escape ' with '' instead of/').

;所有来自外部资源的数据使用一个单引号而不是反斜线进行转义
magic_quotes_sybase = Off

; Automatically add files before or after any PHP document.

;在php脚本执行前，要创建页眉模板或导入代码库，通常使用include()或require()函数来完成，

;可指定文件名和相应的路径，自动完成此过程
auto_prepend_file =

;在脚本执行后自动插入页脚模板
auto_append_file =

; As of 4.0b4, PHP always outputs a character encoding by defaultin
; the Content-type: header.  To disable sending ofthe charset, simply
; set it to be empty.
;
; PHP's built-in default is text/html

;通过PHP应用程序可提供任何文件类型，如果说以其他方式PHP，如是使用用WML，则相应改变MIME类型
default_mimetype = "text/html"

;应用程序支持语言
;default_charset = "iso-8859-1"

; Always populate the $HTTP_RAW_POST_DATA variable.

;使PHP为变量@HTTP_RAW_POST_DATA赋一个串，以POST方式传递的名/值对时，即使表单变量没有相应的值
;always_populate_raw_post_data = On


;;;;;;;;;;;;;;;;;;;;;;;;;
; Paths and Directories ;
;;;;;;;;;;;;;;;;;;;;;;;;;
;函数使用的基本路径
; UNIX: "/path1:/path2"
;include_path = ".:/usr/share/php"
;
; Windows: "/path1;/path2"
;include_path = ".;c:/php/includes"

; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD setdoc_root
; if you are running php as a CGI under any web server (other thanIIS)
; see documentation for security issues.  Thealternate is to use the
; cgi.force_redirect configuration below

;PHP脚本的默认位置
doc_root =

; The directory under which PHP opens the script using /~usernameused only
; if nonempty.

;PHP所使用的绝对目录
user_dir =

; Directory in which the loadable extensions (modules) reside.

;PHP可加载的扩展包的位置
; extension_dir = "./"

; Whether or not to enable the dl() function.  Thedl() function does NOT work
; properly in multithreaded servers, such as IIS or Zeus, and isautomatically
; disabled on them.
; NOTE: this is a potential security hole and is disabled bydefault in debian

;允许用户在运行时加载PHP扩展包，即脚本执行期间加载
enable_dl = Off

; cgi.force_redirect is necessary to provide security running PHPas a CGI under
; most web servers.  Left undefined, PHP turnsthis on by default.  You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**

;
; cgi.force_redirect = 1

; if cgi.nph is enabled it will force cgi to always sent Status:200 with
; every request.
; cgi.nph = 1

; if cgi.force_redirect is turned on, and you are not running underApache or Netscape
; (iPlanet) web servers, you MAY need to set an environmentvariable name that PHP
; will look for to know it is OK to continueexecution.  Setting this variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
; cgi.redirect_status_env = ;

; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATEDsupport for CGI.  PHP's
; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME,and to not grok
; what PATH_INFO is.  For more information onPATH_INFO, see the cgi specs.  Setting
; this to 1 will cause PHP CGI to fix it's paths to conform to thespec.  A setting
; of zero causes PHP to behave as before.  Defaultis 1.  You should fix your scripts
; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
; cgi.fix_pathinfo=0

; FastCGI under IIS (on WINNT based OS) supports the ability toimpersonate
; security tokens of the calling client.  Thisallows IIS to define the
; security context that the request runs under. mod_fastcgi under Apache
; does not currently support this feature (03/17/2002)
; Set to 1 if running under IIS.  Default iszero.
; fastcgi.impersonate = 1;

; Disable logging through FastCGI connection
; fastcgi.logging = 0

; cgi.rfc2616_headers configuration option tells PHP what type ofheaders to
; use when sending HTTP response code. If it's set 0 PHP sendsStatus: header that
; is supported by Apache. When this option is set to 1 PHP willsend
; RFC2616 compliant header.
; Default is zero.
;cgi.rfc2616_headers = 0


;;;;;;;;;;;;;;;;
; File Uploads ;
;;;;;;;;;;;;;;;;

; Whether to allow HTTP file uploads.

;是否启用PHP文件上传功能
file_uploads = On

; Temporary directory for HTTP uploaded files (will use systemdefault if not
; specified).

;指定文件上传所有的目录
;upload_tmp_dir =

; Maximum allowed size for uploaded files.

;设置PHP上传机制所处理的文件大小上限
upload_max_filesize = 2M


;;;;;;;;;;;;;;;;;;
; Fopen wrappers ;
;;;;;;;;;;;;;;;;;;

; Whether to allow the treatment of URLs (like http:// or ftp://)as files.

;PHP把远程文件看作是本地文件
allow_url_fopen = On

; Whether to allow include/require to open URLs (like http:// orftp://) as files.

allow_url_include = Off

; Define the anonymous ftp password (your email address)

;用于完成FTP连接的匿名用户密码

;from="[e-mail]"

; Define the User-Agent string

;PHP会所所处理的输出发送一个内容首部，其中包含一个用户代码属性
; user_agent="PHP"

; Default timeout for socket based streams (seconds)

;基于套接字的超时值
default_socket_timeout = 60

; If your scripts have to deal with files from Macintoshsystems,
; or you are running on a Mac and need to deal with filesfrom
; unix or win32 systems, setting this flag will cause PHP to
; automatically detect the EOL character in those files sothat
; fgets() and file() will work regardless of the source of thefile.

;fgets() and file()确定fgets()和file()读取的数据使用的是哪种文件约定
; auto_detect_line_endings = Off


;;;;;;;;;;;;;;;;;;;;;;
; Dynamic Extensions ;
;;;;;;;;;;;;;;;;;;;;;;
;动态扩展包
; If you wish to have an extension loaded automatically, use thefollowing
; syntax:
;
;  extension=modulename.extension
;
; For example, on Windows:
;
;   extension=msql.dll
;
; ... or under UNIX:
;
;   extension=msql.so
;
; Note that it should be the name of the module only; no directoryinformation
; needs to go here.  Specify the location of theextension with the
; extension_dir directive above.


;;;;;;;;;;;;;;;;;;;
; Module Settings ;
;;;;;;;;;;;;;;;;;;;

[Date]
; Defines the default timezone used by the date functions

;
;date.timezone =

;date.default_latitude = 31.7667
;date.default_longitude = 35.2333

;date.sunrise_zenith = 90.583333
;date.sunset_zenith = 90.583333

[filter]
;filter.default = unsafe_raw
;filter.default_flags =

[iconv]
;iconv.input_encoding = ISO-8859-1
;iconv.internal_encoding = ISO-8859-1
;iconv.output_encoding = ISO-8859-1

[sqlite]
;sqlite.assoc_case = 0

[xmlrpc]
;xmlrpc_error_number = 0
;xmlrpc_errors = 0

[Pcre]
;PCRE library backtracking limit.
;pcre.backtrack_limit=100000

;PCRE library recursion limit.
;Please note that if you set this value to a high number you mayconsume all
;the available process stack and eventually crash PHP (due toreaching the
;stack size limit imposed by the Operating System).
;pcre.recursion_limit=100000

[Syslog]
; Whether or not to define the various syslog variables (e.g.$LOG_PID,
; $LOG_CRON, etc.).  Turning it off is a good ideaperformance-wise.  In
; runtime, you can define these variables by callingdefine_syslog_variables().
define_syslog_variables  = Off

[mail function]
; For Win32 only.
SMTP = localhost
smtp_port = 25

; For Win32 only.
;sendmail_from = [e-mail]

; For Unix only.  You may supply arguments as well(default: "sendmail -t -i").
;sendmail_path =

; Force the addition of the specified parameters to be passed asextra parameters
; to the sendmail binary. These parameters will always replace thevalue of
; the 5th parameter to mail(), even in safe mode.
;mail.force_extra_parameters =

[SQL]
sql.safe_mode = Off

[ODBC]
;odbc.default_db   =  Not yet implemented
;odbc.default_user  =  Not yetimplemented
;odbc.default_pw   =  Not yet implemented

; Allow or prevent persistent links.
odbc.allow_persistent = On

; Check that a connection is still valid before reuse.
odbc.check_persistent = On

; Maximum number of persistent links.  -1 means nolimit.
odbc.max_persistent = -1

; Maximum number of links (persistent +non-persistent).  -1 means no limit.
odbc.max_links = -1

; Handling of LONG fields.  Returns number ofbytes to variables.  0 means
; passthru.
odbc.defaultlrl = 4096

; Handling of binary data.  0 means passthru, 1return as is, 2 convert to char.
; See the documentation on odbc_binmode and odbc_longreadlen for anexplanation
; of uodbc.defaultlrl and uodbc.defaultbinmode
odbc.defaultbinmode = 1

[MySQL]
; Allow or prevent persistent links.
mysql.allow_persistent = On

; Maximum number of persistent links.  -1 means nolimit.
mysql.max_persistent = -1

; Maximum number of links (persistent +non-persistent).  -1 means no limit.
mysql.max_links = -1

; Default port number for mysql_connect().  Ifunset, mysql_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services orthe
; compile-time value defined MYSQL_PORT (in thatorder).  Win32 will only look
; at MYSQL_PORT.
mysql.default_port =

; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
mysql.default_socket =

; Default host for mysql_connect() (doesn't apply in safemode).
mysql.default_host =

; Default user for mysql_connect() (doesn't apply in safemode).
mysql.default_user =

; Default password for mysql_connect() (doesn't apply in safemode).
; Note that this is generally a *bad* idea to store passwords inthis file.
; *Any* user with PHP access can run 'echoget_cfg_var("mysql.default_password")
; and reveal this password!  And of course, anyusers with read access to this
; file will be able to reveal the password as well.
mysql.default_password =

; Maximum time (in seconds) for connect timeout. -1 means nolimit
mysql.connect_timeout = 60

; Trace mode. When trace_mode is active (=On), warnings fortable/index scans and
; SQL-Errors will be displayed.
mysql.trace_mode = Off

[MySQLi]

; Maximum number of links.  -1 means nolimit.
mysqli.max_links = -1

; Default port number for mysqli_connect().  Ifunset, mysqli_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services orthe
; compile-time value defined MYSQL_PORT (in thatorder).  Win32 will only look
; at MYSQL_PORT.
mysqli.default_port = 3306

; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
mysqli.default_socket =

; Default host for mysql_connect() (doesn't apply in safemode).
mysqli.default_host =

; Default user for mysql_connect() (doesn't apply in safemode).
mysqli.default_user =

; Default password for mysqli_connect() (doesn't apply in safemode).
; Note that this is generally a *bad* idea to store passwords inthis file.
; *Any* user with PHP access can run 'echoget_cfg_var("mysqli.default_pw")
; and reveal this password!  And of course, anyusers with read access to this
; file will be able to reveal the password as well.
mysqli.default_pw =

; Allow or prevent reconnect
mysqli.reconnect = Off

[mSQL]
; Allow or prevent persistent links.
msql.allow_persistent = On

; Maximum number of persistent links.  -1 means nolimit.
msql.max_persistent = -1

; Maximum number of links (persistent+nonpersistent).  -1 means no limit.
msql.max_links = -1

[OCI8]
; enables privileged connections using external credentials(OCI_SYSOPER, OCI_SYSDBA)
;oci8.privileged_connect = Off

; Connection: The maximum number of persistent OCI8 connectionsper
; process. Using -1 means no limit.
;oci8.max_persistent = -1

; Connection: The maximum number of seconds a process is allowedto
; maintain an idle persistent connection. Using -1 means idle
; persistent connections will be maintained forever.
;oci8.persistent_timeout = -1

; Connection: The number of seconds that must pass before issuinga
; ping during oci_pconnect() to check the connection validity.When
; set to 0, each oci_pconnect() will cause a ping. Using -1disables
; pings completely.
;oci8.ping_interval = 60

; Tuning: This option enables statement caching, and specifieshow
; many statements to cache. Using 0 disables statementcaching.
;oci8.statement_cache_size = 20

; Tuning: Enables statement prefetching and sets the default numberof
; rows that will be fetched automatically after statementexecution.
;oci8.default_prefetch = 10

; Compatibility. Using On means oci_close() will not close
; oci_connect() and oci_new_connect() connections.
;oci8.old_oci_close_semantics = Off

[PostgresSQL]
; Allow or prevent persistent links.
pgsql.allow_persistent = On

; Detect broken persistent links always with pg_pconnect().
; Auto reset feature requires a little overheads.
pgsql.auto_reset_persistent = Off

; Maximum number of persistent links.  -1 means nolimit.
pgsql.max_persistent = -1

; Maximum number of links (persistent+nonpersistent).  -1 means no limit.
pgsql.max_links = -1

; Ignore PostgreSQL backends Notice message or not.
; Notice message logging require a little overheads.
pgsql.ignore_notice = 0

; Log PostgreSQL backends Noitce message or not.
; Unless pgsql.ignore_notice=0, module cannot log noticemessage.
pgsql.log_notice = 0

[Sybase]
; Allow or prevent persistent links.
sybase.allow_persistent = On

; Maximum number of persistent links.  -1 means nolimit.
sybase.max_persistent = -1

; Maximum number of links (persistent +non-persistent).  -1 means no limit.
sybase.max_links = -1

;sybase.interface_file = "/usr/sybase/interfaces"

; Minimum error severity to display.
sybase.min_error_severity = 10

; Minimum message severity to display.
sybase.min_message_severity = 10

; Compatibility mode with old versions of PHP 3.0.
; If on, this will cause PHP to automatically assign types toresults according
; to their Sybase type, instead of treating them all asstrings.  This
; compatibility mode will probably not stay around forever, so tryapplying
; whatever necessary changes to your code, and turn it off.
sybase.compatability_mode = Off

[Sybase-CT]
; Allow or prevent persistent links.
sybct.allow_persistent = On

; Maximum number of persistent links.  -1 means nolimit.
sybct.max_persistent = -1

; Maximum number of links (persistent +non-persistent).  -1 means no limit.
sybct.max_links = -1

; Minimum server message severity to display.
sybct.min_server_severity = 10

; Minimum client message severity to display.
sybct.min_client_severity = 10

[bcmath]
; Number of decimal digits for all bcmath functions.
bcmath.scale = 0

[browscap]
;browscap = extra/browscap.ini

[Informix]
; Default host for ifx_connect() (doesn't apply in safemode).
ifx.default_host =

; Default user for ifx_connect() (doesn't apply in safemode).
ifx.default_user =

; Default password for ifx_connect() (doesn't apply in safemode).
ifx.default_password =

; Allow or prevent persistent links.
ifx.allow_persistent = On

; Maximum number of persistent links.  -1 means nolimit.
ifx.max_persistent = -1

; Maximum number of links (persistent +non-persistent).  -1 means no limit.
ifx.max_links = -1

; If on, select statements return the contents of a text blobinstead of its id.
ifx.textasvarchar = 0

; If on, select statements return the contents of a byte blobinstead of its id.
ifx.byteasvarchar = 0

; Trailing blanks are stripped from fixed-length charcolumns.  May help the
; life of Informix SE users.
ifx.charasvarchar = 0

; If on, the contents of text and byte blobs are dumped to a fileinstead of
; keeping them in memory.
ifx.blobinfile = 0

; NULL's are returned as empty strings, unless this is set to1.  In that case,
; NULL's are returned as string 'NULL'.
ifx.nullformat = 0

[Session]
; Handler used to store/retrieve data.
session.save_handler = files

; Argument passed to save_handler.  In the case offiles, this is the path
; where data files are stored. Note: Windows users have to changethis
; variable in order to use PHP's session functions.
;
; As of PHP 4.0.1, you can define the path as:
;
;    session.save_path = "N;/path"
;
; where N is an integer.  Instead of storing allthe session files in
; /path, what this will do is use subdirectories N-levels deep,and
; store the session data in those directories. This is useful if you
; or your OS have problems with lots of files in one directory, andis
; a more efficient layout for servers that handle lots ofsessions.
;
; NOTE 1: PHP will not create this directory structureautomatically.
;        You can use the script in the ext/session dir for thatpurpose.
; NOTE 2: See the section on garbage collection below if you chooseto
;        use subdirectories for session storage
;
; The file storage module creates files using mode 600 bydefault.
; You can change that by using
;
;    session.save_path = "N;MODE;/path"
;
; where MODE is the octal representation of the mode. Note thatthis
; does not overwrite the process's umask.
;session.save_path = /var/lib/php5

; Whether to use cookies.
session.use_cookies = 1

;session.cookie_secure =

; This option enables administrators to make their usersinvulnerable to
; attacks which involve passing session ids in URLs; defaults to0.
; session.use_only_cookies = 1

; Name of the session (used as cookie name).
session.name = PHPSESSID

; Initialize session on request startup.
session.auto_start = 0

; Lifetime in seconds of cookie or, if 0, until browser isrestarted.
session.cookie_lifetime = 0

; The path for which the cookie is valid.
session.cookie_path = /

; The domain for which the cookie is valid.
session.cookie_domain =

; Whether or not to add the httpOnly flag to the cookie, whichmakes it inaccessible to browser scripting languages such asJavaScript.
session.cookie_httponly =

; Handler used to serialize data.  php is thestandard serializer of PHP.
session.serialize_handler = php

; Define the probability that the 'garbage collection' process isstarted
; on every session initialization.
; The probability is calculated by usinggc_probability/gc_divisor,
; e.g. 1/100 means there is a 1% chance that the GC processstarts
; on each request.

; This is disabled in the Debian packages, due to the strictpermissions
; on /var/lib/php5.  Instead of setting this here,see the cronjob at
; /etc/cron.d/php5, which uses the session.gc_maxlifetime settingbelow
;session.gc_probability = 0
session.gc_divisor    = 100

; After this number of seconds, stored data will be seen as'garbage' and
; cleaned up by the garbage collection process.
session.gc_maxlifetime = 1440

; NOTE: If you are using the subdirectory option for storingsession files
;      (see session.save_path above), then garbage collection does*not*
;      happen automatically.  You will need to do yourown garbage
;      collection through a shell script, cron entry, or some othermethod.
;      For example, the following script would is the equivalent of
;      setting session.gc_maxlifetime to 1440 (1440 seconds = 24minutes):
;         cd /path/to/sessions; find -cmin +24 | xargs rm

; PHP 4.2 and less have an undocumented feature/bug that allows youto
; to initialize a session variable in the global scope, albeitregister_globals
; is disabled.  PHP 4.3 and later will warn you,if this feature is used.
; You can disable the feature and the warning separately. At thistime,
; the warning is only displayed, if bug_compat_42 is enabled.

session.bug_compat_42 = 1
session.bug_compat_warn = 1

; Check HTTP Referer to invalidate externally stored URLscontaining ids.
; HTTP_REFERER has to contain this substring for the session tobe
; considered as valid.
session.referer_check =

; How many bytes to read from the file.
session.entropy_length = 0

; Specified here to create the session id.
session.entropy_file =

;session.entropy_length = 16

;session.entropy_file = /dev/urandom

; Set to {nocache,private,public,} to determine HTTP cachingaspects
; or leave this empty to avoid sending anti-caching headers.
session.cache_limiter = nocache

; Document expires after n minutes.
session.cache_expire = 180

; trans sid support is disabled by default.
; Use of trans sid may risk your users security.
; Use this option with caution.
; - User may send URL contains active session ID
;   to other person via.email/irc/etc.
; - URL that contains active session ID may be stored
;   in publically accessiblecomputer.
; - User may access your site with the same session ID
;   always using URL stored inbrowser's history or bookmarks.
session.use_trans_sid = 0

; Select a hash function
; 0: MD5   (128 bits)
; 1: SHA-1 (160 bits)
session.hash_function = 0

; Define how many bits are stored in each character whenconverting
; the binary hash data to something readable.
;
; 4 bits: 0-9, a-f
; 5 bits: 0-9, a-v
; 6 bits: 0-9, a-z, A-Z, "-", ","
session.hash_bits_per_character = 4

; The URL rewriter will look for URLs in a defined set of HTMLtags.
; form/fieldset are special; if you include them here, the rewriterwill
; add a hidden <input> field with theinfo which is otherwise appended
; to URLs.  If you want XHTML conformity, removethe form entry.
; Note that all valid entries require a "=", even if no valuefollows.
url_rewriter.tags ="a=href,area=href,frame=src,input=src,form=,fieldset="

[MSSQL]
; Allow or prevent persistent links.
mssql.allow_persistent = On

; Maximum number of persistent links.  -1 means nolimit.
mssql.max_persistent = -1

; Maximum number of links (persistent+nonpersistent).  -1 means no limit.
mssql.max_links = -1

; Minimum error severity to display.
mssql.min_error_severity = 10

; Minimum message severity to display.
mssql.min_message_severity = 10

; Compatibility mode with old versions of PHP 3.0.
mssql.compatability_mode = Off

; Connect timeout
;mssql.connect_timeout = 5

; Query timeout
;mssql.timeout = 60

; Valid range 0 - 2147483647.  Default =4096.
;mssql.textlimit = 4096

; Valid range 0 - 2147483647.  Default =4096.
;mssql.textsize = 4096

; Limits the number of records in each batch.  0 =all records in one batch.
;mssql.batchsize = 0

; Specify how datetime and datetim4 columns are returned
; On => Returns data converted to SQL serversettings
; Off => Returns values as YYYY-MM-DD hh:mm:ss
;mssql.datetimeconvert = On

; Use NT authentication when connecting to the server
mssql.secure_connection = Off

; Specify max number of processes. -1 = library default
; msdlib defaults to 25
; FreeTDS defaults to 4096
;mssql.max_procs = -1

; Specify client character set.
; If empty or not set the client charset from freetds.comf isused
; This is only used when compiled with FreeTDS
;mssql.charset = "ISO-8859-1"

[Assertion]
; Assert(expr); active by default.
;assert.active = On

; Issue a PHP warning for each failed assertion.
;assert.warning = On

; Don't bail out by default.
;assert.bail = Off

; User-function to be called if an assertion fails.
;assert.callback = 0

; Eval the expression with currenterror_reporting().  Set to true if you want
; error_reporting(0) around the eval().
;assert.quiet_eval = 0

[COM]
; path to a file containing GUIDs, IIDs or filenames of files withTypeLibs
;com.typelib_file =
; allow Distributed-COM calls
;com.allow_dcom = true
; autoregister constants of a components typlib on com_load()
;com.autoregister_typelib = true
; register constants casesensitive
;com.autoregister_casesensitive = false
; show warnings on duplicate constant registrations
;com.autoregister_verbose = true

[mbstring]
; language for internal character representation.
;mbstring.language = Japanese

; internal/script encoding.
; Some encoding cannot work as internal encoding.
; (e.g. SJIS, BIG5, ISO-2022-*)
;mbstring.internal_encoding = EUC-JP

; http input encoding.
;mbstring.http_input = auto

; http output encoding. mb_output_handler must be
; registered as output buffer to function
;mbstring.http_output = SJIS

; enable automatic encoding translation according to
; mbstring.internal_encoding setting. Input chars are
; converted to internal encoding by setting this to On.
; Note: Do _not_ use automatic encoding translation for
;      portable libs/applications.
;mbstring.encoding_translation = Off

; automatic encoding detection order.
; auto means
;mbstring.detect_order = auto

; substitute_character used when character cannot beconverted
; one from another
;mbstring.substitute_character = none;

; overload(replace) single byte functions by mbstringfunctions.
; mail(), ereg(), etc are overloaded by mb_send_mail(),mb_ereg(),
; etc. Possible values are 0,1,2,4 or combination of them.
; For example, 7 for overload everything.
; 0: No overload
; 1: Overload mail() function
; 2: Overload str*() functions
; 4: Overload ereg*() functions
;mbstring.func_overload = 0

[FrontBase]
;fbsql.allow_persistent = On
;fbsql.autocommit = On
;fbsql.show_timestamp_decimals = Off
;fbsql.default_database =
;fbsql.default_database_password =
;fbsql.default_host =
;fbsql.default_password =
;fbsql.default_user = "_SYSTEM"
;fbsql.generate_warnings = Off
;fbsql.max_connections = 128
;fbsql.max_links = 128
;fbsql.max_persistent = -1
;fbsql.max_results = 128

[gd]
; Tell the jpeg decode to libjpeg warnings and try to create
; a gd image. The warning will then be displayed as notices
; disabled by default
;gd.jpeg_ignore_warning = 0

[exif]
; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JISas JIS.
; With mbstring support this will automatically be converted intothe encoding
; given by corresponding encode setting. When emptymbstring.internal_encoding
; is used. For the decode settings you can distinguish betweenmotorola and
; intel byte order. A decode setting cannot be empty.
;exif.encode_unicode = ISO-8859-15
;exif.decode_unicode_motorola = UCS-2BE
;exif.decode_unicode_intel   = UCS-2LE
;exif.encode_jis =
;exif.decode_jis_motorola = JIS
;exif.decode_jis_intel   = JIS

[Tidy]
; The path to a default tidy configuration file to use when usingtidy
;tidy.default_config = /usr/local/lib/php/default.tcfg

; Should tidy clean and repair output automatically?
; WARNING: Do not use this option if you are generating non-htmlcontent
; such as dynamic images
tidy.clean_output = Off

[soap]
; Enables or disables WSDL caching feature.
soap.wsdl_cache_enabled=1
; Sets the directory name where SOAP extension will put cachefiles.
soap.wsdl_cache_dir="/tmp"
; (time to live) Sets the number of second while cached file willbe used
; instead of original one.
soap.wsdl_cache_ttl=86400

; Local Variables:
; tab-width: 4
; End: