USB无线网卡驱动RT73的移植

 

1.RT73无线网卡驱动： 
http://www.ralinktech.com.tw/data/drivers/2009_0206_RT73_Linux_STA_Drv1.1.0.2.tar.bz2 

2.解压 
# tar -xvzf  2009_0206_RT73_Linux_STA_Drv1.1.0.2.tar.bz2 
# cd 2009_2006_RT73_Linux_STA_Drv_1.1.0.2/Module 
# cp Makefile.6  ./Makefile 

3.编辑Makefile 
###################################################################### 
# Module Name: Makefile 
# Abstract: Makefile for rt73 linux driver on kernel series 2.6 
###################################################################### 
CC     :=arn-linux-gcc 
LD     :=arm-linux-ld 
#PLATFORM=PC 
PLATFORM=CMPC 
#Enable for wpa_supplicant's spcific driver "driver_ralink.c", default enabled. 
HAS_RALINK_WPA_SUPPLICANT_SUPPORT=y 
#Enable for wpa_supplicant's generic driver "driver_wext.c", used for NetworkManager 
HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n 
#Support Block Net-If during TxSw queue full. 
HAS_BLOCK_NET_IF=y 

WFLAGS := -Wall -Wstrict-prototypes -Wno-trigraphs 
ifeq ($(HAS_RALINK_WPA_SUPPLICANT_SUPPORT),y) 
WFLAGS += -DRALINK_WPA_SUPPLICANT_SUPPORT 
endif 
ifeq ($(HAS_NATIVE_WPA_SUPPLICANT_SUPPORT),y) 
WFLAGS += -DNATIVE_WPA_SUPPLICANT_SUPPORT 
endif 
ifeq ($(HAS_BLOCK_NET_IF),y) 
WFLAGS += -DBLOCK_NET_IF 
endif 
## Comment/uncomment the following line to enable/disable debugging 
#EXTRA_CFLAGS += -DDBG 
EXTRA_CFLAGS += $(WFLAGS) 
ifeq ($(PLATFORM),PC) 
LINUX_SRC =/lib/modules/$(shell uname -r)/build 
endif 
ifeq ($(PLATFORM),CMPC) 
#LINUX_SRC = /home/fonchi/vendor/kernel-default-2.6.21/linux-2.6.21 
LINUX_SRC = /usr/work/linux-2.6.24 
endif 
EXTRA_CFLAGS += -I$(LINUX_SRC)/include 
obj-m := rt73.o 
rt73-objs := / 
rtmp_main.o / 
mlme.o / 
connect.o / 
rtusb_bulk.o / 
rtusb_io.o / 
sync.o / 
assoc.o / 
auth.o / 
auth_rsp.o / 
rtusb_data.o / 
rtmp_init.o / 
sanity.o / 
rtmp_wep.o / 
rtmp_info.o / 
rtmp_tkip.o / 
wpa.o md5.o 
ifeq ($(HAS_NATIVE_WPA_SUPPLICANT_SUPPORT),y) 
rt73-objs += rtmp_wext.o 
endif 
ifeq ($(HAS_BLOCK_NET_IF),y) 
rt73-objs += netif_block.o 
endif 
## Configuration files on SuSE 
#NDDIR=/etc/sysconfig/network 
#MOD_CONF=/etc/modprobe.d/module-renames 
## NDDIR/ifcfg-rausb0 
ND_CONF=/etc/sysconfig/network-scripts/ifcfg-rausb0 
ifdef NDDIR 
NDDIR := $(NDDIR) 
else 
  NDDIR := /etc/sysconfig/network-scripts 
endif 
ifdef MOD_CONF 
MOD_CONF := $(MOD_CONF) 
else 
MOD_CONF := /etc/modprobe.conf 
endif 
all: 
make -C $(LINUX_SRC) SUBDIRS=$(shell pwd) modules 
clean: 
rm -rf *.o *~ .*.cmd *.ko *.mod.c .tmp_versions built-in.o 

install: 
make -C /lib/modules/$(shell uname -r)/build / 
INSTALL_MOD_DIR=extra SUBDIRS=$(shell pwd) / 
modules_install 

@echo "Network device directory $(NDDIR)"; 
@echo "Module configuration file $(MOD_CONF)"; 

@if [ -d "$(NDDIR)" ] ; then / 
  if [ ! -f "$(ND_CONF)" ]; then / 
   echo "Create 'ifcfg-rausb0' in $(NDDIR)/"; / 
   cp ifcfg-rausb0 $(NDDIR)/ ; / 
  fi; / 
  fi 

@if ! grep -q 'rausb0' $(MOD_CONF) ; then / 
  echo "append 'alias rausb0 rt73' to $(MOD_CONF)"; / 
  echo "alias rausb0 rt73" >> $(MOD_CONF) ; / 
  fi 
/sbin/depmod -a 
# auto copy *.bin to /etc/Wireless/RT73STA 
# mkdir /etc/Wireless ; 
# mkdir /etc/Wireless/RT73STA ; 
# cp $(shell pwd)/*.bin /etc/Wireless/RT73STA ; 
# cp $(shell pwd)/*.dat /etc/Wireless/RT73STA ; 
# Copy file on Mandriva 2007.1 
# cp $(shell pwd)/*.bin /lib/firmware/ ; 
config: 
@touch config.mk 
@./Configure 

4.交叉编译 
# make all 
生成rt73.ko 

5.在嵌入式linux下 
# mkdir /etc/Wireless 
# mkdir /etc/Wireless/RT73STA 
# cp rt73.bin /etc/Wireless/RT73STA/rt73.bin 
# dos2unix rt73sta.dat 
# cp rt73sta.dat  /etc/Wireless/RT73STA/rt73sta.dat 
# /sbin/insmod rt73.ko 
#/sbin/ifconfig rausb0 inet 192.168.2.9 up

#route add -net 192.168.2.0 netmask 255.255.255.0 gw 192.168.2.1  dev rausb0

ping  192.168.2.1 -t

 

 

# ifconfig rausb0 up     
# iwconfig             
# iwlist rausb0 scanning     
# iwconfig rausb0 essid "your wireless net"       
# iwconfig rausb0 key "your key"                     
设置一下IP地址和DNS，就可以上网了！ 
可使用udhcpc自动获取ip地址 
# udhcpc -i rausb0 

ping一下网关及外网地址