cisco ipphone连接hp 2610交换机问题
来源:互联网 发布:grub修复启动到windows 编辑:程序博客网 时间:2024/05/16 01:56
Recently acquired a 2610-24-PWR and I want to use it for my Cisco phones (7940s and 7960s). I've already got Call Manager setup and currently these phones (10 phones) work through a switch module that I have in my 2800 series router. From the Cisco router/switch I have two vlans, VLAN 1 and VLAN 10. VLAN 1 is used for voice traffic and VLAN 10 is used for data traffic. VLAN 1 operates on the 172.18.1.x /24 subnet and VLAN 10 operates on the 192.168.1.x /24 subnet. Each port has the following configuration:
switchport trunk native vlan 10
switchport mode trunk
switchport voice vlan 1
mls qos trust dscp
auto qos voip trust
auto discovery qos
spanning-tree portfast
This seems to work just fine. If I ever add a new phone to this Cisco device the pone comes up just fine and I'm able to configure it in CUCM without issue.
I tried to replicate this as best I could on the Procurve but I don’t believe I have things working correctly. Below is output from that switch, can someone help guide me through this? It’s my first time working with a Procurve switch, thank.
… Also, I know to use crossover cables, the phones ARE powering up, they just aren’t getting their info from the tftp server that is providing configuration data to the phones.
vlan 1
name "voice"
untagged 1-23,25-28
ip address 172.18.1.55 255.255.255.0
tagged Trk1
exit
vlan 10
name "DATA"
tagged 1-23,25-28,Trk1
exit
power pre-std-detect
spanning-tree Trk1 priority 4
switchport trunk native vlan 10
switchport mode trunk
switchport voice vlan 1
mls qos trust dscp
auto qos voip trust
auto discovery qos
spanning-tree portfast
This seems to work just fine. If I ever add a new phone to this Cisco device the pone comes up just fine and I'm able to configure it in CUCM without issue.
I tried to replicate this as best I could on the Procurve but I don’t believe I have things working correctly. Below is output from that switch, can someone help guide me through this? It’s my first time working with a Procurve switch, thank.
… Also, I know to use crossover cables, the phones ARE powering up, they just aren’t getting their info from the tftp server that is providing configuration data to the phones.
vlan 1
name "voice"
untagged 1-23,25-28
ip address 172.18.1.55 255.255.255.0
tagged Trk1
exit
vlan 10
name "DATA"
tagged 1-23,25-28,Trk1
exit
power pre-std-detect
spanning-tree Trk1 priority 4
- cisco ipphone连接hp 2610交换机问题
- Cisco IPPhone XML 技术文档
- Cisco交换机堆叠连接方式及原理
- cisco路由器和交换机的密码问题
- cisco交换机
- Linux下如何通过串口连接Cisco交换机
- 透过现象看问题Cisco交换机状态灯全解
- Cisco交换机解决网络蠕虫病毒入侵问题
- Cisco交换机命令清单
- CISCO 交换机 DHCP 管理
- CISCO交换机概览
- CISCO 交换机的配置
- Cisco交换机密码恢复
- Cisco交换机设置点滴
- CISCO交换机常用命令S1
- CISCO交换机常用命令
- Cisco交换机的密码恢复
- CISCO 交换机 SPAN设置
- 毕业了,要走了!
- 新的Sql分页的方法,效率绝对优先。
- Samba is really cool
- The resposibility of Scrum Master
- QQ2009 Preview deb包 更新下载地址
- cisco ipphone连接hp 2610交换机问题
- 软件测试中的风险分析
- C++学习笔记3---类和动态内存分配
- 开源CRM软件列表
- C# 基礎備忘
- Customize the default size of terminal in Ubuntu
- 几个MIS_表的相关内容
- 获取动态SQL执行结果
- java保留两位小数