【转】 Shell编程基础
来源:互联网 发布:西门子s7200编程软件 编辑:程序博客网 时间:2024/05/21 21:50
Shell编程基础
出自Ubuntu中文
本文作者:Leal
授权许可:
- 创作共享协议
- GNU自由文档许可证
编辑人员:FireHare, Dbzhang800
我们可以使用任意一种文字编辑器,比如gedit、kedit、emacs、vi等来编写shell脚本,它必须以如下行开始(必须放在文件的第一行):
#!/bin/sh...
注意:最好使用“!/bin/bash”而不是“!/bin/sh”,如果使用tc shell改为tcsh,其他类似。
符号#!用来告诉系统执行该脚本的程序,本例使用/bin/sh。编辑结束并保存后,如果要执行该脚本,必须先使其可执行:
chmod +x filename
此后在该脚本所在目录下,输入 ./filename 即可执行该脚本。
目录
[隐藏]- 1 Shell里的一些特殊符号
- 1.1 引号
- 2 Here Document
- 3 Shell里的函数
- 4 Shell脚本示例
- 4.1 二进制到十进制的转换
- 4.2 文件循环拷贝
- 5 脚本调试
[编辑] Shell里的一些特殊符号
[编辑] 引号
在向程序传递任何参数之前,程序会扩展通配符和变量。这里所谓的扩展是指程序会把通配符(比如*)替换成适当的文件名,把变量替换成变量值。我们可以使用引号来防止这种扩展,先来看一个例子,假设在当前目录下有两个jpg文件:mail.jpg和tux.jpg。
#!/bin/shecho *.jpg
运行结果为:
mail.jpg tux.jpg
引号(单引号和双引号)可以防止通配符*的扩展:
#!/bin/shecho "*.jpg"echo '*.jpg'
其运行结果为:
*.jpg*.jpg
其中单引号更严格一些,它可以防止任何变量扩展;而双引号可以防止通配符扩展但允许变量扩展:
#!/bin/shecho $SHELLecho "$SHELL"echo '$SHELL'
运行结果为:
/bin/bash/bin/bash$SHELL
此外还有一种防止这种扩展的方法,即使用转义字符——反斜杆:/:
echo /*.jpgecho /$SHELL
输出结果为:
*.jpg$SHELL
[编辑] Here Document
当要将几行文字传递给一个命令时,用here documents是一种不错的方法。对每个脚本写一段帮助性的文字是很有用的,此时如果使用here documents就不必用echo函数一行行输出。Here document以 << 开头,后面接上一个字符串,这个字符串还必须出现在here document的末尾。下面是一个例子,在该例子中,我们对多个文件进行重命名,并且使用here documents打印帮助:
#!/bin/sh# we have less than 3 arguments. Print the help text:if [ $# -lt 3 ] ; thencat << HELPren -- renames a number of files using sed regular expressions USAGE: ren 'regexp' 'replacement' files...EXAMPLE: rename all *.HTM files in *.html: ren 'HTM$' 'html' *.HTMHELP exit 0fiOLD="$1"NEW="$2"# The shift command removes one argument from the list of# command line arguments.shiftshift# $* contains now all the files:for file in $*; do if [ -f "$file" ] ; then newfile=`echo "$file" | sed "s/${OLD}/${NEW}/g"` if [ -f "$newfile" ]; then echo "ERROR: $newfile exists already" else echo "renaming $file to $newfile ..." mv "$file" "$newfile" fi fidone
这个示例有点复杂,我们需要多花点时间来说明一番。第一个if表达式判断输入命令行参数是否小于3个 (特殊变量$# 表示包含参数的个数) 。如果输入参数小于3个,则将帮助文字传递给cat命令,然后由cat命令将其打印在屏幕上。打印帮助文字后程序退出。如果输入参数等于或大于3个,我们就将第一个参数赋值给变量OLD,第二个参数赋值给变量NEW。下一步,我们使用shift命令将第一个和第二个参数从参数列表中删除,这样原来的第三个参数就成为参数列表$*的第一个参数。然后我们开始循环,命令行参数列表被一个接一个地被赋值给变量$file。接着我们判断该文件是否存在,如果存在则通过sed命令搜索和替换来产生新的文件名。然后将反短斜线内命令结果赋值给newfile。这样我们就达到了目的:得到了旧文件名和新文件名。然后使用 mv命令进行重命名
[编辑] Shell里的函数
如果你写过比较复杂的脚本,就会发现可能在几个地方使用了相同的代码,这时如果用上函数,会方便很多。函数的大致样子如下:
functionname(){# inside the body $1 is the first argument given to the function# $2 the second ...body}
你需要在每个脚本的开始对函数进行声明。
下面是一个名为xtitlebar的脚本,它可以改变终端窗口的名称。这里使用了一个名为help的函数,该函数在脚本中使用了两次:
#!/bin/sh# vim: set sw=4 ts=4 et:help(){cat << HELPxtitlebar -- change the name of an xterm, gnome-terminal or kde konsoleUSAGE: xtitlebar [-h] "string_for_titelbar"OPTIONS: -h help textEXAMPLE: xtitlebar "cvs"HELPexit 0}# in case of error or if -h is given we call the function help:[ -z "$1" ] && help[ "$1" = "-h" ] && help# send the escape sequence to change the xterm titelbar:echo -e "33]0;$107"#
在脚本中提供帮助是一种很好的编程习惯,可以方便其他用户(和自己)使用和理解脚本。
== 命令行参数 == XXXXXXXXXXXXXXXXXXXXXXXXXX
我们已经见过$* 和 $1, $2 ... $9 等特殊变量,这些特殊变量包含了用户从命令行输入的参数。迄今为止,我们仅仅了解了一些简单的命令行语法(比如一些强制性的参数和查看帮助的-h选项)。但是在编写更复杂的程序时,您可能会发现您需要更多的自定义的选项。通常的惯例是在所有可选的参数之前加一个减号,后面再加上参数值 (比如文件名)。
有好多方法可以实现对输入参数的分析,但是下面的使用case表达式的例子无疑是一个不错的方法。
#!/bin/sh help(){ cat << HELP This is a generic command line parser demo. USAGE EXAMPLE: cmdparser -l hello -f -- -somefile1 somefile2HELP exit 0} while [ -n "$1" ]; docase $1 in -h) help;shift 1;; # function help is called -f) opt_f=1;shift 1;; # variable opt_f is set -l) opt_l=$2;shift 2;; # -l takes an argument -> shift by 2 --) shift;break;; # end of options -*) echo "error: no such option $1. -h for help";exit 1;; *) break;;esacdone echo "opt_f is $opt_f"echo "opt_l is $opt_l"echo "first arg is $1"echo "2nd arg is $2"
你可以这样运行该脚本:
cmdparser -l hello -f -- -somefile1 somefile2
返回结果如下:
opt_f is 1opt_l is hellofirst arg is -somefile12nd arg is somefile2
这个脚本是如何工作的呢?脚本首先在所有输入命令行参数中进行循环,将输入参数与case表达式进行比较,如果匹配则设置一个变量并且移除该参数。根据unix系统的惯例,首先输入的应该是包含减号的参数。
[编辑] Shell脚本示例
=== 一般编程步骤=== xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
现在我们来讨论编写一个脚本的一般步骤。任何优秀的脚本都应该具有帮助和输入参数。写一个框架脚本(framework.sh),该脚本包含了大多数脚本需要的框架结构,是一个非常不错的主意。这样一来,当我们开始编写新脚本时,可以先执行如下命令:
cp framework.sh myscript
然后再插入自己的函数。
让我们来看看如下两个示例。
[编辑] 二进制到十进制的转换
脚本 b2d 将二进制数 (比如 1101) 转换为相应的十进制数。这也是一个用expr命令进行数学运算的例子:
#!/bin/sh# vim: set sw=4 ts=4 et:help(){ cat << HELP b2d -- convert binary to decimal USAGE: b2d [-h] binarynum OPTIONS: -h help text EXAMPLE: b2d 111010will return 58HELP exit 0} error(){ # print an error and exit echo "$1" exit 1} lastchar(){ # return the last character of a string in $rval if [ -z "$1" ]; then # empty string rval="" return fi # wc puts some space behind the output this is why we need sed: numofchar=`echo -n "$1" | wc -c | sed 's/ //g' ` # now cut out the last char rval=`echo -n "$1" | cut -b $numofchar`} chop(){ # remove the last character in string and return it in $rval if [ -z "$1" ]; then # empty string rval="" return fi # wc puts some space behind the output this is why we need sed: numofchar=`echo -n "$1" | wc -c | sed 's/ //g' ` if [ "$numofchar" = "1" ]; then # only one char in string rval="" return fi numofcharminus1=`expr $numofchar "-" 1` # now cut all but the last char: rval=`echo -n "$1" | cut -b -$numofcharminus1` #原来的 rval=`echo -n "$1" | cut -b 0-${numofcharminus1}`运行时出错. #原因是cut从1开始计数,应该是cut -b 1-${numofcharminus1}} while [ -n "$1" ]; docase $1 in -h) help;shift 1;; # function help is called --) shift;break;; # end of options -*) error "error: no such option $1. -h for help";; *) break;;esacdone# The main programsum=0weight=1# one arg must be given:[ -z "$1" ] && helpbinnum="$1"binnumorig="$1" while [ -n "$binnum" ]; do lastchar "$binnum" if [ "$rval" = "1" ]; then sum=`expr "$weight" "+" "$sum"` fi # remove the last position in $binnum chop "$binnum" binnum="$rval" weight=`expr "$weight" "*" 2`done echo "binary $binnumorig is decimal $sum"#
该脚本使用的算法是利用十进制和二进制数权值 (1,2,4,8,16,..),比如二进制"10"可以这样转换成十进制:
0 * 1 + 1 * 2 = 2
为了得到单个的二进制数我们是用了lastchar 函数。该函数使用wc –c计算字符个数,然后使用cut命令取出末尾一个字符。Chop函数的功能则是移除最后一个字符。
[编辑] 文件循环拷贝
你可能有这样的需求并一直都这么做:将所有发出邮件保存到一个文件中。但是过了几个月之后,这个文件可能会变得很大以至于该文件的访问速度变慢;下面的脚本 rotatefile 可以解决这个问题。这个脚本可以重命名邮件保存文件(假设为outmail)为outmail.1,而原来的outmail.1就变成了 outmail.2 等等...
#!/bin/sh# vim: set sw=4 ts=4 et: ver="0.1"help(){ cat << HELP rotatefile -- rotate the file name USAGE: rotatefile [-h] filename OPTIONS: -h help text EXAMPLE: rotatefile out This will e.g rename out.2 to out.3, out.1 to out.2, out to out.1[BR] and create an empty out-file The max number is 10 version $ver HELP exit 0} error(){ echo "$1" exit 1} while [ -n "$1" ]; do case $1 in -h) help;shift 1;; --) break;; -*) echo "error: no such option $1. -h for help";exit 1;; *) break;; esacdone # input check:if [ -z "$1" ] ; then error "ERROR: you must specify a file, use -h for help"fi filen="$1"# rename any .1 , .2 etc file:for n in 9 8 7 6 5 4 3 2 1; do if [ -f "$filen.$n" ]; then p=`expr $n + 1` echo "mv $filen.$n $filen.$p" mv $filen.$n $filen.$p fidone # rename the original file:if [ -f "$filen" ]; then echo "mv $filen $filen.1" mv $filen $filen.1fi echo touch $filentouch $filen
这个脚本是如何工作的呢?在检测到用户提供了一个文件名之后,首先进行一个9到1的循环;文件名.9重命名为文件名.10,文件名.8重命名为文件名. 9……等等。循环结束之后,把原始文件命名为文件名.1,同时创建一个和原始文件同名的空文件(touch $filen)
[编辑] 脚本调试
最简单的调试方法当然是使用echo命令。你可以在任何怀疑出错的地方用echo打印变量值,这也是大部分shell程序员花费80%的时间用于调试的原因。Shell脚本的好处在于无需重新编译,而插入一个echo命令也不需要多少时间。
shell也有一个真正的调试模式,如果脚本"strangescript"出错,可以使用如下命令进行调试:
sh -x strangescript
7 上述命令会执行该脚本,同时显示所有变量的值。
shell还有一个不执行脚本只检查语法的模式,命令如下:
sh -n your_script
这个命令会返回所有语法错误。
我们希望你现在已经可以开始编写自己的shell脚本了,尽情享受这份乐趣吧! :)
- Shell编程基础(转)
- 【转】 Shell编程基础
- Shell编程基础《转》
- 【shell】shell 编程基础
- Shell编程基础(转)
- (转)Shell编程基础
- shell编程之shell基础
- Shell编程基础
- Shell编程基础
- Shell编程基础
- Shell编程基础
- Shell编程基础
- Shell编程基础
- 学习Shell编程基础
- Linux Shell 编程基础
- 基础shell编程
- Shell编程基础
- shell编程基础
- 1874 畅通工程续 模板题 Dijkstra算法 Bellman_Ford算法
- 如何通过博客挣钱?
- Java面试题一(基础)
- Linux下软AP功能之Hostapd介绍
- 如何使用Maven 3.0, Flex Mojos 4.0和Flex 4.5构建一个简单的SWF程序
- 【转】 Shell编程基础
- config_svn_server
- linux openssl 编程
- 在jsp页面中调用js文件
- (转载)一个微博数据库设计带来的简单思考
- sftp远程linux
- Asp.net 服务器端 C# 调用 js
- config_tftp_server
- 射频技术原理